When, instead of the usual desktop, Redmi Note 7 shows an image of a hare repairing an android, or the Fastboot inscription on a black background, owners are often taken by surprise. This mode is designed for low-level debugging of the device, but accidentally hitting it blocks normal use of the smartphone. Most often the problem is solved by a simple keyboard combination, but in some cases more complex software manipulations are required.
The reasons for this situation can range from the banal sticking of buttons to serious errors in system files. Xiaomi Redmi Note 7, like many other models based on Snapdragon processors, uses this mode for firmware through the computer. If the device is getting stuck in this state, you should not panic, since in most cases the phone is fully functional. It is important to consistently perform a series of actions to force you to leave debugging mode.
In this article, we will take a look at all the known ways to remove the Fastboot from the screen, from simple reboot methods to flashing the device. You will learn why the phone could go into this mode on its own and how to prevent a repeat of the situation in the future.
The reasons for the appearance of the Fastboot mode on the Redmi Note 7
Understanding the nature of the problem is the first step to solving it successfully. Xiaomi's Fastboot mode is activated when you boot the system if you detect a particular combination of events or signals from the hardware, most often due to mechanical impact on the device's body. A protective case not specifically designed for your model can constantly press the volume button, which when you turn on the phone leads to entry into firmware mode.
Another common cause is software failures that occur after a failed system update or custom Recovery installation. If the bootloader files are damaged or modified, the system cannot properly start Android and goes into emergency mode.
Can I lose data when I leave Fastboot?
Hardware malfunctions can also be ignored. Moisture, a strong impact or a push-button plume can give a false signal to press. In such cases, the Redmi Note 7 will leave the Fastboot cyclically even if you successfully performed the reboot. Diagnosis begins with the exclusion of external factors such as covers and protective glass.
Basic method: Forced button reboot
The easiest and safest way to remove a Fastboot from the screen is to force a physical reboot, which works 90% of the time if the device has no critical hardware damage, and first you need to make sure you have access to the side of the smartphone where the control keys are located.
You'll need to hold the power button for a long time, and unlike a normal shutdown, it takes patience. The Snapdragon 660 processor in the Redmi Note 7 responds to a long press with a hardware interrupt that forcibly cuts the power and starts the boot cycle anew.
☑️ Algorithm of exit through buttons
If standard power button retention doesn't work, try a button combination. Press the Volume Up button and the Power button at the same time. Hold them for about 10-15 seconds. This combination is often used to exit the recovery and fastboot modes on Xiaomi devices. Once the screen goes out and the manufacturer's logo appears, release the keys.
In some cases, especially if the battery is deeply drained, the device may not respond to presses immediately. Connect the original USB cable to the charger and wait 10-15 minutes. Once the charge indication appears, repeat the procedure with the buttons. Do not use damaged cables, as unstable power can interfere with the correct start of the system.
Use of the computer and ADB utility
If physical buttons don’t respond or the reboot method fails, you can use the software method through your computer, which requires installing Xiaomi drivers and the minimum set of ADB tools (Android Debug Bridge), which is effective when a software failure blocks the response to the buttons, but the power controller works properly.
You must first download and install the Minimal package. ADB and Fastboot on your PC. Connect the Redmi Note 7 to your computer via USB-The phone should have a connection indicator on the screen (usually a cable or an android image). Open the command line in the utility folder. ADB.
Enter the following command to check the connection:
fastboot devicesIf you get the serial number of the device in response, you've got the connection.
fastboot rebootThis (instruction) sends a signal to restart the device in normal mode, and if the command is successful, the phone should vibrate and start normal MIUI booting.
💡
Use the original. USB-Cheap charging cables often don't have data lines, making it impossible to connect to a computer.
It's worth noting that this method requires a PC pre-prepared. If the drivers are not installed, the computer will not see the phone, and the team will give an error. In the Windows Device Manager, in the "Other Devices" or "Ports" section, a device called Android or Qualcomm should appear. If there is an exclamation point, the drivers should be updated manually.
Button check and hardware diagnostics
When the software is exhausted and the Fastboot returns immediately after the reboot, the problem is the hardware. The most likely culprit is a stuck Volume Down button, which is responsible for entering this mode when the Redmi Note 7 starts. Mechanical jamming can be caused by dirt, oxidation of contacts after moisture hits, or simply wear and tear of the mechanism.
Do a visual and tactile inspection of the buttons. Press the volume button several times. It should have a clear, ringing click and return to its original position. If the button is difficult, it fails or does not feel clicked, there is a high probability of mechanical failure, in which case the phone reads the "pressed" signal every time it turns on and goes into debugging mode.
| Symptoms. | Probable cause | Decision |
|---|---|---|
| The button doesn't come back | Mechanical jamming, mud. | Cleaning with alcohol, switching buttons |
| The phone vibrates in your pocket | Spontaneous pressing | Checking the case, replacing the plume |
| Fastboot after falling | Retreat of the button plume | Disassembly, reconnecting the plume |
| The mode is on itself. | Closing the board | Diagnostics at the service center |
Also worth checking is the safety case. Take it off completely and try to turn on the phone. Cheap silicone bumpers stretch over time and start pressing the keys. If the case is gone, just replace the accessory with a better one, with accurate cutouts under the Redmi Note 7.
Resetting settings via Recovery Mode
If you exit Fastboot, but the system loads with errors or throws it back into debugging mode, you may have damaged system files, in which case the factory reset via the Recovery menu will help, a step that is more radical and requires caution, as it leads to the deletion of user data.
To enter Recovery mode on a phone that is turned off (or after a successful reboot from Fastboot), you need to press the Volume Up button and the Power button. Hold them until the Mi logo appears, then release power, but keep the volume down until the recovery menu appears. Navigation is done with volume buttons, the power button selects.
⚠️ Warning: Wipe Data will completely remove all photos, contacts and apps from the device's internal memory. Make sure you have a backup of important data if possible.
From the Recovery menu, select Wipe Data, then confirm Wipe All Data. Once you've completed the process, select Reboot -> Reboot to System. The phone will restart with a clean system. If the Fastboot reappears, the problem is likely hardware.
Sometimes it helps to clear the cache without deleting personal data. Select Wipe Cache (if available in your version of Recovery).This is secure and can resolve temporary file conflicts that cause MIUI download failure.
Firmware recovery via Mi Flash
When all methods are exhausted, the final software argument is a complete flashing of the device. The Mi Flash Tool allows you to record a fresh system image on the Redmi Note 7, bypassing damage to the current firmware. This method requires a stable Internet to download files and care when choosing a firmware mode.
You will need to download the official firmware for your model (Global, China or Russia version should match the region of the device or be global) in the format Fastboot (extension.tgz). Unpack the archive in the root of the C disk so that the path is short, for example C:\rom. Launch Mi Flash Tool on behalf of the administrator.
💡
Selecting Clear All mode in the Mi Flash Tool is guaranteed to remove system errors, but completely erases data. Save user data mode may not fix the problem if system partitions are damaged.
Connect your phone in Fastboot mode to your PC. Press the Refresh button in the program, the serial number of the device should appear. Specify the path to the firmware folder. In the lower right corner, select Clean all mode. Press Flash and wait for the process to end. The green success signifies successful completion.
Once the firmware is in place, the phone will automatically restart. It can take up to 10 minutes to boot the first time. If there's an error (red text) in the process, try it. USB-Also make sure that the battery is at least 50% so that the device does not turn off in the middle of the process, which can lead to a brick.