How to remove Fastboot on Xiaomi Redmi 7: all working ways 2026

Xiaomi Redmi 7 is one of the most popular budget smartphones of the brand, but even it is not immune to a sudden hit in the Fastboot mode. This engineering mode can appear after a failed update, a firmware failure or accidental pressing of the button combination. If your Redmi 7 is getting stuck on a black screen with the inscription FASTBOOT and a hare in a hat-husband, do not panic - in 90% of cases, the problem can be solved without contacting the service.

In this article, we will discuss all the current ways to exit from Fastboot to Xiaomi Redmi 7, from the simplest (reboot) to advanced (firmware through Mi Flash Tool). Special attention will be paid to data security, you will learn when information will remain intact and when you will have to reset. We will also analyze the reasons for getting into this mode and give recommendations on how to avoid repeated failures.

What is Fastboot and why does Redmi 7 get it?

Fastboot Mode (not to be confused with Recovery!) is a low-level Android device boot mode designed to:

• 🔧 Smartphone firmware via PC
• 🔄 Unlock the bootloader (bootloader)
• 🛠️ Recovery of the system after critical failures
• 📱 Testing of hardware

On Xiaomi Redmi 7, this mode is activated when:

1. Simultaneously pressing the buttons Volume down + Power when turned on.
2. Misfunction of MIUI update (especially when the process is interrupted)
3. Failed to get root rights or install custom Recovery (TWRP)
4. Hardware problems (damaged power button, fallen off battery plume).

It's important to understand that if a smartphone loads spontaneously into a Fastboot without you doing something, it's a sign of a serious malfunction that you'd better diagnose at the service center, but 80 percent of the time, the software is to blame, and you can solve the problem yourself.

Method 1: Simple reboot (works 60% of the time)

The fastest and safest method is forced reboot, which will work if the smartphone hits the Fastboot due to a temporary failure, not a hardware breakdown.

Instructions:

1. Press the Power button for 15-20 seconds until the screen goes out.
2. Wait 30 seconds – the smartphone should automatically restart in normal mode.
3. If the screen catches fire again with the words FASTBOOT, repeat the action 2-3 times.

If the reboot didn’t help, try an alternative:

Clutch power. + Volume up for 10 seconds|Disconnect the charger (if connected)|Extract SIM-memory-card|Try again in 1 minute.-->

Critical information: On Redmi 7 with the bootloader unlocked, prolonged button retention can cause resets.If you're unsure of bootloader status, don't hold the buttons for longer than 20 seconds.

Method 2: Exit through Recovery Mode

If a simple reboot doesn’t work, the next step is to switch to Recovery Mode, a method that stores user data but requires precise execution of instructions.

Step-by-step:

1. Turn off your smartphone (hold power until the screen is turned off).
2. Press the Power + Volume combination up and hold for 8-10 seconds until the Mi logo appears.
3. Release the buttons and you will be taken to the Recovery menu (in English or Chinese).
4. Use volume buttons for navigation and power to select Reboot → Reboot to System.

If the menu is in Chinese, focus on the icons:

• 🔄 — reboot (Reboot)
• 📱 — system loading (System)
• ⚙️ — settings (Settings)

⚠️ Warning: Do not select Wipe Data or Factory Reset, this will result in a complete cleanup of internal memory!

Method 3: Use the Mi Flash Tool (for advanced users)

If the first two methods didn’t work, you’ll have to connect your smartphone to your PC and use the official Mi Flash Tool, which is guaranteed to take Redmi 7 out of Fastboot, but requires:

• 💻 Windows computer 7/10/11
• 🔌 Original. USB-cable (better from the set)
• 📥 Redmi 7 firmware (the version should match yours)
• 🔓 Unlocked bootloader (if previously unblocked, you will need a Mi Account)

Algorithm of action:

1. Download and install the Mi Flash Tool from the official website.
2. Download the firmware for Redmi 7 (e.g. V12.5.1.0.QFLMIXM for global version) in.tgz format.
3. Unclarify the firmware into a folder without Cyrillic characters (for example, C:\Redmi7_Firmware).
4. Connect the switched off smartphone to the PC, holding Volume down (should be defined as Qualcomm HS-USB QDLoader 9008).
5. In the Mi Flash Tool, select the firmware folder and press Refresh, then Flash.

⚠️ Note: Firmware via the Mi Flash Tool with Clean All option will delete all data, including photos and contacts. If your smartphone had important files, try the non-reset methods first (Methods 1–2) or retrieve the data through the ADB.

Method 4: ADB commands for power users

If you have experience with ADB (Android Debug Bridge), you can try to exit Fastboot via the command line.This method is suitable if the smartphone is defined by a PC, but the standard methods do not work.

Tools required:

• 🖥️ Established ADB and Fastboot drivers
• 🔌 USB-data-couple
• 📋 Included debugging by USB (if previously set up)

Teams to exit Fastboot:

fastboot devices # Check the connection of the device


fastboot continue # Continue to boot the system




fastboot reboot #Forced reboot




fastboot oem edl # Going to EDL mode (for firmware)

If the fastboot continues command doesn’t work, try:

fastboot flash boot.img # Flashing boot section (requires boot.img file from firmware)


fastboot reboot-bootloader #Reboot bootloader

1. Change. USB-port (better to use) USB 2.0).

2. disable driver signatures in Windows (to do this, type in the command line on behalf of the administrator: bcdedit /set nointegritychecks on).

3.Use the original Xiaomi cable – cheap cables often don’t transmit data.-->

Method 5: Hardware reset (if nothing helps)

If all previous methods fail, the last option is hard reset, which will delete all data, but return the smartphone to working condition.

How to reset on Redmi 7:

1. Turn off your smartphone (hold power for 15 seconds).
2. Press Power + Volume Up to Enter Recovery.
3. Select Wipe Data → Wipe All Data (navigation with volume buttons, confirmation – Power).
4. After reset, select Reboot → Reboot to System.

If the Recovery menu is not available, you can reset via Fastboot:

fastboot erase userdata


fastboot erase cache




fastboot reboot

⚠️ Note: Some versions of Redmi 7 reset via Fastboot can block the bootloader.If the fastboot reboot command does not turn on the smartphone, you will need to unlock through the Mi Unlock Tool.

💡

Hard reset is a last resort. Before resetting, try connecting your smartphone to your PC and copy the data via ADB (adb pull /sdcard/ command) if debugging has been enabled.

Reasons for re-entry into Fastboot and how to avoid it

If your Redmi 7 is regularly downloaded to Fastboot, the problem lies deeper.

Preventive measures:

• 🔄 Update. MIUI Only through official channels (Settings) → The phone. → Updating the system).
• 🔒 Do not install custom firmware without unlocking the bootloader.
• 📴 Avoid battery drain (keep the charge at 20–80%).
• 🛡️ Regularly back up through Settings → Additionally. → Backup and reset.

FAQ: Frequent questions about Fastboot on Xiaomi Redmi 7