How to remove Fastboot on Xiaomi: all the working ways of 2026

The hare-haired, Fastboot-inspired screen on Xiaomi is one of the most common problems faced by smartphone owners. The mode designed to help them fix and restore the device sometimes activates spontaneously: after a failed update, reset, or even a banal reboot. Unlike Recovery Mode, where you can still try standard recovery options, Fastboot requires more in-depth knowledge — or precise instructions.

In this article, we will analyze all the current ways to exit from Fastboot to Xiaomi, Redmi and other platforms. POCO (including models from 2023 to 2026, and taking into account the specifics of the MIUI And hardware constraints. You'll find out:

• 🔧 Why Smartphones Are Stuck in Fastboot: 7 Top Reasons (From Banal to Critical).
• 📱 How to get out without a computer – methods for beginners with minimal risks.
• 💻 Advanced PC solutions – if standard methods don’t work.
• ⚠️ What can you do to avoid turning your phone into a brick».

Important: If your Xiaomi doesn’t respond to buttons or PC connection, immediately go to the section about hardware failures – it describes the symptoms of a motherboard or battery malfunction.

Why Xiaomi is stuck in Fastboot mode: 7 reasons

Fastboot Mode (not to be confused with Fastboot Mode in the download menu!) is a low-level tool for interacting with Xiaomi bootloader.

1. Forced – when the user himself transfers the device to this mode (for example, to unlock the bootloader).
2. Automatically – when the system boots when Android cannot start.

Here are the reasons why your Redmi Note 12 is so important, POCO X5 Mi 11 can be “hang” on the screen with a hare:

• 🔄 Interrupted update MIUI — if the firmware has downloaded, but not installed (for example, due to a discharged battery).
• 🧹 Hard Reset via Recovery that ended in an error.
• 🔌 Unstable PC connection during firmware through Mi Flash Tool.
• 🛠️ Damaged firmware (for example, after a failed attempt to install custom Recovery type) TWRP).
• 🔋 Critical battery discharge (less than 5%) during reboot.
• 🤖 Module conflict MIUI — For example, after manual removal of system applications.
• 💥 Hardware failure: damage to flash memory (eMMC/UF) power-controller.

According to statistics from Xiaomi service centers, 60% of cases are due to software errors (paragraphs 1-4), which can be fixed independently, and the remaining 40% are hardware problems that need repair.

💡

If before the advent of Fastboot you installed a magnetic charger or case with metal elements, turn them off – they can block the power button, simulating a clamping.

Ways to exit Fastboot without a computer

If you don't have a PC, try these methods. They work on 70-80% of devices (except models with a locked bootloader or corrupted firmware).

1. Forced reset

The easiest way that works in 30% of cases is:

1. Press the power button for 10-15 seconds.
2. If the screen is gone, release the button and wait for the vibration (the start signal).
3. If the hare remains - repeat the action 2-3 times with an interval of 5 seconds.

In some models (for example, POCO F5) The combination is different: you need to clamping the power + volume increase by 20 seconds.

2.Switch to Recovery Mode

If the forced reboot didn’t help, try logging into Recovery and starting the reset:

1. Turn off the phone (squeeze the power for 10 seconds).
2. Press the power + increase the volume until the Mi logo appears.
3. From the Recovery menu, select Wipe Data → Wipe All Data (use volume buttons for navigation, power for confirmation).
4. After resetting, restart the device (Reboot → Reboot to System).

⚠️ Warning: This method will delete all data on your phone, including photos and apps.If you have Mi Cloud backup enabled, it will be easier to restore contacts and notes.

3. Connecting to charging

If the battery is under 5%, Xiaomi may not leave the Fastboot due to lack of power to boot the system.

• 🔌 Leave the phone to charge for 15-20 minutes when off.
• 🔄 Try a forced reboot (see method 1).
• 🔋 If the charge indicator appears on the screen, wait 10-15% and try again.

1. Checked the charge level (minimum 15%)

2. disabled all accessories (cases, charges, headphones)

3. Tried forced reboot 3 times

4.Make sure the buttons don't stick-->

Advanced methods using PC

If the simple methods didn’t work, you’d need a computer with Xiaomi drivers installed and firmware utilities installed, a section that’s suitable for users who are ready for more complex manipulations.

1. firmware via Mi Flash Tool

This method will restore the system even if the firmware is damaged. 10C, POCO X4 Pro, Mi 11 Lite, but requires:

• 💻 Computer on Windows 7/10/11 (on macOS/Linux Possible problems with drivers).
• 🔌 Original. USB-cable (better from the set).
• 📁 Fastboot firmware ROM For your model (you can download it on the official Xiaomi website).

Step-by-step:

1. Install Qualcomm drivers (for smartphones on Snapdragon) or MediaTek.
2. Unpack the firmware archive in a folder without Cyrillic characters (for example, C:\MiFlash\rom).
3. Run MiFlash.exe on behalf of the administrator.
4. Connect the phone to the PC by clamping down the volume + Power (Fastboot should appear on the screen).
5. In MiFlash, click Select, specify the firmware folder, then Refresh (the device should appear).
6. Select Clean All mode and press Flash.
7. Wait until the end (usually 3-10 minutes) and automatic reboot.

⚠️ If MiFlash is a “Cannot receive hello packet” error, try it: 🔌 Connect the phone to another USB-port (better) USB 2.0 on the back of the PC). 🔄 Reinstall drivers manually through Device Manager. 🛠️ Run MiFlash in Windows 7 Compatibility Mode.

2. Unlock the bootloader (if blocked)

On new Xiaomi models (released after 2021), the bootloader is locked by default. If you haven't unlocked it before, MiFlash won't be able to flash the device.

1. Download Mi Unlock Tool and log in to Mi Account.
2. Connect your phone in Fastboot mode.
3. Follow the instructions (you will need to link your account to your device and wait 72-168 hours for some models).

On models POCO X3 Pro and Redmi Note 10 Pro after unlocking the bootloader can work hardware protection, requiring authorization through Mi Account even after firmware.

Advanced solutions for experienced users

If standard methods didn't help and the phone is still stuck in the Fastboot, try these methods.They require technical knowledge and can lead to a loss of warranty.

1. Firmware via EDL (Emergency Download Mode)

EDL — It's a firmware emergency mode that works even if the Fastboot isn't available:

• 🔧 Short test points on the motherboard (requires disassembly of the phone).
• 💻 Use QFil (for Qualcomm) or SP Flash Tool (for MediaTek).
• 📁 Find the right firmware in.mbn or.bin format.

This method is risky: if you make a mistake, the phone can turn into a brick, and we recommend that you contact the service center if you are not sure about your skills.

2. Flashing through TWRP (if established)

If your Xiaomi has previously installed custom Recovery (TWRP), You can try to run the system through it:

1. Download the right Custom ROM (for example, XDA Developers).
2. Place the firmware file on SD-card or phone memory (if available).
3. Hold the power. + increase the volume to enter the TWRP.
4. Select Wipe → Advanced Wipe and select Dalvik, Cache, System, Data.
5. Press Install, select the firmware file and wait for completion.

⚠️ Note: Installing unofficial firmware may cause problems with Widevine (Netflix, Disney will not work)+ into HD) and denial of warranty service.

3. Verification of hardware components

If none of the software methods worked, the problem could be hardware.

• 🔥 The phone is still warmed even when it is off.
• 🔋 The battery does not hold a charge (discharges in 10-20 minutes).
• 🛠️ Artifacts appear on the screen (stripes, flickering).
• 🔌 USB-port does not recognize cables (you need to “play” with the position of the plug).

In this case, self-repair is not recommended - contact the service center. Average cost of diagnosis: 500-1000 ₽, Flash memory repair: 2000–5000 ₽.

💡

If the phone does not respond to buttons, is not detected by the PC and does not charge - with a 90% probability it is a hardware malfunction (power controller, flash memory or motherboard).

What to do if Xiaomi doesn’t respond to the buttons

So if you don't turn on, vibrate, or detect the phone at all, you can see that there's a serious problem.

1. Battery check

If your phone doesn’t show signs of life, check:

• 🔌 Charger - try another (original) one with a cable USB-C/Type-C.
• 🔋 Battery - if it is removable, remove and check for bloating.
• 🔌 USB-Port – inspect for damage or oxidation.

On Redmi models 9A, POCO M3 Others with removable batteries can try "resuscitation»:

1. Remove the battery for 1 minute.
2. Press the power button for 30 seconds (discharge the capacitors).
3. Insert the battery back and connect the charger.

Short-circuit test

If the phone is warming but not turning on, it may have short circuited (for example, after falling or getting moisture).

• 🔥 The body is hot even without a charging connection.
• 💨 Smell of smoke when trying to turn on.
• 🔋 The battery is discharged in a few minutes.

In this case, do not try to turn on the device - this may cause fire.

3. Diagnosis through testpoints (for experienced)

If you are an electronics expert, you can try “resuscitation” through test points:

1. Take your phone apart (see instructions for your model on iFixit).
2. Find contacts on the motherboard EDL (usually signed or marked on the diagram).
3. Short them with tweezers or a needle, simultaneously connecting USB-plug-in.
4. If the device is identified as Qualcomm HS-USB QDLoader 9008, can be stitched through QFil.

⚠️ Warning: Incorrectly closing the test points can permanently disable the phone.

How to avoid getting back into Fastboot

To avoid any more hanging out in Fastboot, follow these guidelines:

• 🔄 Update. MIUI Only through official channels (Settings) → The phone. → Updating the system).
• 🔋 Do not interrupt charging at a battery level below 20%.
• 🛠️ Do not remove system applications without root rights.
• 💻 Use original cables to connect to your PC.
• 🔒 Do not block the bootloader unless you plan to install custom firmware.

Also, regularly back up through Settings. → Additionally. → Backup and reset or Mi Cloud.This will help to quickly recover data after reset.

Frequent questions about Fastboot on Xiaomi