How to Get Out of Safe Mode on Xiaomi Redmi: The Complete Guide

Safe Mode on Xiaomi Redmi smartphones is a diagnostic mode that automatically disables all third-party applications and leaves only system services. It is activated when OS malfunctions, program conflicts or incorrect updates. Although the mode is useful for troubleshooting, many users face the problem: the phone gets stuck in it and does not return to normal operation.

In this article, we’ll look at 5 proven ways to turn off Safe Mode on Redmi Note 10/11/12, Redmi 9/10, POCO and other models, from simple reboot to forced resetting, and learn why a smartphone can automatically turn on Safe Mode after each launch and how to prevent it.

Important: If your Xiaomi only boots in safe mode and doesn’t respond to standard methods, the problem may lie in corrupted system files, which would require a flashing through Fastboot or a call to the service center.

Why Xiaomi Redmi is a safe mode on its own?

Activating Safe Mode without you is a signal of a system malfunction, and here are the most common reasons:

• 🔄 Application conflict: Installed software (especially from unknown sources) interferes with Android.The system automatically goes into safe mode to isolate the problem.
• 📱 Failed update MIUI: If the firmware was interrupted or installed with errors, the smartphone can “hinge” on Safe Mode.
• 🔋 Hardware failures: A damaged power button or battery glitch sometimes mimics a key combination to enter diagnostic mode.
• 🛠️ Rooting or modification of the system: Incorrectly installed Magisk, TWRP Modified build.prop files can be forced to activate Safe Mode.

Most often, the problem arises after:

• 📥 Installations APK-Files from third-party sources (not from Google Play).
• 🔄 Updates MIUI «airborne» (OTA) interrupted.
• 🔧 Using software to clean the cache or “accelerators” of the phone.

⚠️ Attention: If safe mode is activated after a fall or hit of a smartphone, do not try to leave it programmatically. This may be a sign of damage to the motherboard.

Method 1: Standard Reboot (works 70% of the time)

The simplest method is forced reboot, which helps if Safe Mode is activated due to a temporary failure.

1. Hold the Power button for 10-15 seconds until the screen goes out.
2. Wait 30 seconds (don’t turn on your phone right away!)
3. Press the Power button again to turn the device on.

If you don't see "Safe Mode" at the bottom of the screen after you reboot, you've solved the problem. If you don't, move on to the next way.

Make sure that the bottom left corner does not have the inscription "Safe Mode"|Try to open a third-party app (e.g. Telegram)|Restart the phone again if the mode is activated again.-->

On some Redmi models (such as the Redmi Note 8 Pro or POCO X3), the standard reboot does not work due to a bug in MIUI. In this case, try pressing the power button + volume increase for 20 seconds.

Method 2: Disconnect through the notification panel

The latest versions of MIUI (12-14) have the ability to exit Safe Mode directly from the notification curtain, which works if the mode is activated software (for example, after an application crash).

1. Swipe your finger down from the top of the screen to open the notification bar.
2. Find a notification with the text Safe Mode is enabled (usually at the top of the list).
3. Slap it on it and the switch off button will appear.
4. Confirm the action and wait for the automatic reboot.

If there is no notification, then Safe Mode has been activated at the hardware level (for example, by pressing buttons when turned on).

Method 3: Remove the “Problem” Application

If Safe Mode is activated after you install a particular application, it needs to be removed, and even in Safe Mode, you can uninstall the software through settings.

1. Open Settings → Applications → Application Management.
2. Tap three points (⋮) → Showing System Processes.
3. Sort the list by installation date (⋮ → By installation date).
4. Remove suspicious apps (especially apps that are not installed from Google Play).
5. Reboot the phone.

The typical “culprits” of Safe Mode on Xiaomi:

• 🎮 Game cheats (e.g. GameGuardian, Lucky Patcher).
• 🔍 Optimizers and Cleaners (Clean Master, DU Speed Booster).
• 📱 Launchers from third-party developers (Nova Launcher, Apex Launcher – sometimes conflict with the new system). MIUI).
• 🔧 Modified APK (hacked versions of Spotify, Netflix, etc.).

⚠️ Note: If you have removed all suspicious apps but Safe Mode still turns on, check device administrators in Settings → Passwords and security → Device administrators: Some programs (e.g., antiviruses) may block the exit from diagnostic mode.

Method 4: Resetting cache via Recovery Mode

If previous methods didn’t work, try clearing the system cache through Recovery mode.This won’t delete your data, but will reset temporary files that may be causing crashes.

1. Turn off the phone (hold power + Volume down to vibration).
2. Press Power + Volume Up and hold until the Mi logo appears.
3. In the Recovery menu, select the language (English / Chinese), then tap on Wipe & Reset.
4. Select Wipe Cache (not Wipe All Data!)
5. Confirm the action and wait until it's done. Then restart the phone.

After cleaning the cache, the smartphone should boot in normal mode. If Safe Mode is still active, move to the latter method.

💡

If you have custom Recovery (TWRP) installed, choose Advanced → Wipe Dalvik/ART Cache instead of the standard reset.This is a deeper cleaning that often solves the problem.

Method 5: Complete reset (last chance)

If none of the methods worked, then you have to reset your phone to the factory settings, which will delete all the data, so back up first (if the phone is working in Safe Mode at all).

How to Reset Xiaomi Redmi:

1. Open Settings → About the phone → Reset settings.
2. Select to erase all data (reset to factory).
3. Enter a password (if required) and confirm the action.
4. Wait until the phone is finished (it will reboot several times).

If your phone doesn’t respond to the sensor in Safe Mode, reset via Recovery:

1. Turn off the device.
2. Press Power + Volume Up to Enter Recovery.
3. Select Wipe All Data (or Factory Reset)
4. Confirm and wait for completion.

⚠️ Note: After reset, the phone will require you to enter your Mi Account data if you previously activated the binding. If you forgot your username / password, it will be impossible to unlock the device without contacting the Xiaomi service center!

💡

Resetting to factory settings is the only way to exit Safe Mode if the cause is corrupted system files, but this is an extreme measure: use it only if other methods have not worked.

What if the safe mode is turned on again?

If after successfully exiting Safe Mode, it returns each time it is turned on, the problem may be:

• 🔧 Damaged power button (physical malfunction simulates key clamping).
• 📱 Damaged partition of the system (requires flashing through Fastboot).
• 🔄 Conflict with MIUI (For example, after rooting or installing custom firmware).

Decisions:

1. Check the power button: Press it several times – if it “sticks” or makes unusual sounds, bring the phone to the service.
2. Update MIUI: Go to Settings → About Phone → System Update and install the latest firmware version.
3. If you are an experienced user, try flashing your smartphone through the Mi Flash Tool (instructions are available on the 4PDA forum).

If you are not sure of your abilities, it is better to contact an authorized service center Xiaomi.

FAQ: Frequent questions about safe mode on Xiaomi