How to Remove Safe Mode on Redmi 9: All the Working Techniques of 2026

Safe Mode on Xiaomi Redmi 9 is a diagnostic mode that automatically disables all third-party apps, leaving only system ones. It can activate after a failed update, a failure when downloading or if you accidentally pinch the power and volume buttons during the reboot. The main problem is that messengers, games and many functions do not work in this mode, and the inscription "Safe Mode" is constantly hanging at the bottom of the screen.

In 90% of cases, it takes less than a minute to exit Safe Mode, but some users experience a looped mode where the phone persistently returns to it after each reboot. In this article, we will discuss 5 working ways to disable Safe Mode on Redmi 9, Redmi 9A, 9C and 9T, including methods for cases where the standard reboot does not help. All instructions are tested on the latest versions of MIUI 14/15 and are relevant for 2026.

1. Standard Reboot is the fastest way

In most cases, a normal device reboot is sufficient, and this method works if the safe mode is activated due to a temporary failure or accidental pressing of buttons.

How to do this:

• 🔄 Hold the power button (off) for 5-7 seconds until the menu appears.
• 🔁 Select "Reboot" (or "Restart" in English firmware).
• ⏳ Wait for a full reboot (usually 30-60 seconds).

Make sure the "Safe Mode" label is gone.|

Try to open any third-party app (such as WhatsApp)|

Check notifications – they should be displayed as normal

-->

If the message is still there, it means that the mode is looped, move on to the next way, and the standard reset may not work if:

• 📱 The phone was discharged to 0% and turned on in safe mode.
• 🔧 Recently, an update has been installed. MIUI custom-made.
• 🎮 Volume buttons were clamped when turned on.

2. Forced shutdown via volume buttons

If the standard reboot didn’t work, try a hardware reset using a button combination, which works in 70% of looped Safe Mode cases.

Instructions:

1. 🔋 Turn off the phone completely (hold the power button for 10-15 seconds).
2. 🔊 After turning off simultaneously press: Power button (on) Volume Up button)

10-15 seconds

Redmi

✅ Release the buttons and wait for the normal loading.

Important! Don't confuse this method with logging into Recovery Mode. If you have a menu on the screen that says "Wipe Data" or "Reboot," you've been holding the buttons for too long.

⚠️ Warning: Don't select "Wipe Data" in Recovery! This will cause your phone to reset completely".

3. Remove the problem application (if the mode is re-enabled)

If Safe Mode is activated after each reboot, one of the installed applications is to blame.

• 🛡️ Antiviruses (Avast, Dr.Web, 360 Security)
• 🔧 Optimizers (Clean Master, DU Speed Booster)
• 🎮 GameGuardian, Lucky Patcher)
• 📱 Nova Launcher (Apex Launcher, Nova Launcher)

How to find and remove the "culprit":

1. 🔍 Load in Safe Mode (if the phone is back in it).
2. ⚙️ Go to Settings. → Annexes → Application management.
3. 📅 Sort applications by installation date ("Last-last").
4. 🗑️ Remove suspicious programs (see list above).
5. 🔄 Reboot the phone.

If you can’t identify a problem application, try to delete the last 3-5 installed programs, and most often, applications that request administrator rights or special permissions (for example, overlaying over other windows) cause conflict.

-->

Critical information: Redmi 9 with MIUI 14+ firmware may be enabled due to conflict with Google Play services. If deleting apps didn't help, try updating Google Play Services manually through the Google Play Store.

4.Cache reset via Recovery Mode (advanced method)

If the previous methods didn't work, you'll have to clear the cache, and it won't delete your data, but it will reset temporary files that can cause Safe Mode to loop.

Step-by-step:

1. 🔋 Turn off your phone completely.
2. 🔊 Press the power button. + Volume button for 10-15 seconds.
3. 📱 When the Mi logo appears, release the buttons – you will be taken to Recovery Mode.
4. 🌐 Use volume buttons for navigation and power button for selection.
5. 🧹 Select the option "Wipe & Reset" → "Wipe Cache".
6. ✅ Confirm the action and wait for the completion.
7. 🔄 Select "Reboot" → "Reboot to System".

What if the phone is still in Safe Mode after the cache is reset? That means the problem is deeper, perhaps the system firmware is damaged, and only a full Hard Reset or Fastboot flashing will help.

Cache reset is a secure procedure that doesn’t delete photos, contacts or apps; it only clears temporary files that may interfere with normal downloading.

-->

5. Complete resetting of settings (if nothing helps)

This is an extreme measure to resort to if all other methods have not worked. Hard Reset will delete all data from the phone, so first:

• 📱 Backup important files (if the phone is working at all).
• ☁️ Sync contacts and photos with Mi Cloud or Google account.
• 🔐 Remember the information from the Xiaomi account (mail and password).

How to perform the reset:

1. 🔋 Turn off the phone.
2. 🔊 Hold the Power. + Volume Up to Enter Recovery Mode.
3. 🧹 Select "Wipe & Reset" → "Wipe All Data".
4. ✅ Confirm the action (you will need to enter the password from the Mi-account if it was tied to you).
5. 🔄 After reset, select "Reboot to System".

⚠️ Note: Redmi 9 with a locked bootloader after Hard Reset may require authorization to the Mi Account that was tied before the reset.

Once reset, the phone will boot up normally, but you'll have to set it up from scratch, and if that doesn't work, there's a hardware problem (e.g., the volume button is faulty) or there's a broken firmware, and then you can go to the service center.

Additional advice and answers to questions

If you’re running into Safe Mode on Redmi 9, here are some more useful life hacks:

On some MIUI firmware, you can turn off Safe Mode via a notification. Pull the curtain down, find the "Safe Mode On" notification and tap it, and the "Disable" button will appear.

-->

• 🔋 If the phone is discharged to 0% and only turns on in Safe Mode, plug it into charging for 15-20 minutes, then try a standard reboot.
• 🔄 If the mode is activated after the update MIUI, Try to roll back to the previous version via Fastboot (instructions are on the forum). 4PDA).
• 🛠️ If the volume button is stuck or damaged, the phone can constantly boot in safe mode.

FAQ: Frequent questions about Redmi's safe mode 9