How to remove the password from the Xiaomi phone: all ways to unlock

A forgotten password on Xiaomi is a situation that thousands of users face every day. Unlike iPhones, where unlocking often requires contacting a service center, Redmi, POCO or Mi smartphones offer several ways to solve the problem. However, not all methods are equally safe: some save data, others lead to a complete reset, and others can turn the phone into a brick if you act carelessly.

In this article, we will analyze 5 working ways to remove a password - from official (via Mi Account) to technical (using Fastboot and other methods). EDL-Particular attention will be paid to models with a Qualcomm chip (Snapdragon), where emergency firmware mode is available, and devices on MediaTek, where the unlock algorithm is different. You will also learn how to avoid locking after a reset and what to do if your phone requires an old password even after a hard reset.

1 Unlocking through Mi Account (official method)

The most legal and recommended method for Xiaomi is to use a tied Mi Account, which works if:

• 📱 The phone is connected to the Internet (Wi-Fi or mobile network).
• 🔑 You remember the username and password from Mi Account that was tied to the device.
• 🔄 Find Device has been activated in the settings.

If the conditions are met, follow the instructions:

1. Go to the Mi Account page from another device.
2. Sign in under your account.
3. Select the “Find Device” tab.
4. The map will display your smartphone – click on it and select “Unlock Device”.
5. Confirm the action via SMS or email.

⚠️ Warning: If the phone has been enabled Factory Reset via Mi Account (an option in security settings), you may need to enter the old password after unlocking, even after a hard reset.

💡

If you don’t remember the Mi Account password, try to restore it through your email or phone number. In extreme cases, contact Xiaomi with proof of ownership of the device (check, box).

2. Recovery Mode reset (data loss)

If the Mi Account is not tied or you don’t remember the login details, you can still reset hardware via Recovery Mode, which removes all data from your phone, including photos, contacts and apps, and is suitable for most Xiaomi, Redmi and POCO models (except for devices with a locked bootloader).

Instructions:

1. Turn off the phone with a long press on the power button.
2. Press the Power button + Volume up at the same time and hold for 10-15 seconds until the Mi logo appears.
3. From the Recovery menu, select the language (usually English or Chinese).
4. Go to Wipe Data → Wipe All Data (use volume buttons for navigation, power button for confirmation).
5. Confirm the reset by Confirm selection.
6. Once completed, select Reboot to reboot.

⚠️ Note: Some models (e.g. Xiaomi) 12T, Redmi Note 11 Pro+) After the reset, you may be asked to enter an old password or Mi Account data (FRP). In this case, you will need additional unlocking via Fastboot or contact the service.

Turn off your Google account (if your phone is enabled)

Backup important data (via Mi Cloud or computer)

Charge your phone at least 50%

Prepare. SIM-post-reset activation card

-->

3. Unlock via Fastboot (for advanced users)

The method via Fastboot is suitable if:

• 🔓 Phone locked, but bootloader unlocked.
• 💻 You have a computer with Xiaomi drivers installed and Mi Flash Tool program.
• 📥 You downloaded the official firmware for your model (for example, fastboot-rom for Redmi Note 10 Pro).

Step-by-step:

1. Turn off the phone and put it in Fastboot mode: press the Power button + Volume down.
2. Connect the device to the computer through USB-cable.
3. Start the Mi Flash Tool (you can download from the official website).
4. In the program, click Select and specify the path to the unpacked firmware.
5. Select firmware mode: Clean All – Full Reset (recommended). Clean All and Lock – Reset + Lock the bootloader (only if you are sure!).

Flash

⚠️ Note: Fastboot firmware on models with locked bootloader (Xiaomi 13, Redmi) K50 It can cause a brick (device failure). Before the procedure, check the status of the bootloader with the command:

fastboot oem device-info

If Device unlocked: false is in the answer, first unlock the bootloader through the official Xiaomi tool.

4. Password circumvention through EDL-mode (for Qualcomm)

Regime. EDL (Emergency Download Mode is a “hidden” emergency firmware mode available on Xiaomi smartphones with Qualcomm Snapdragon processors (e.g., a “hidden” mode, POCO X3 Pro, Redmi Note 10, which allows you to flash a phone even with a locked bootloader, but requires special equipment (EDL-cable) or knowledge of commands to put the device in this mode.

Methods of activating EDL:

• 🔌 Hardware method: Close the contacts Test Point on the board (requires disassembly of the phone).
• 💻 Software method: Use the adb reboot edl command (if enabled) USB Debugging).
• 🔄 Through button combination: On some models, pinch the Volume up + Loudness down + Power (not working on all devices).

After moving to EDL:

1. Connect the phone to your computer, and it will be identified as a Qualcomm HS-USB QDLoader 9008.
2. Use the Mi Flash Tool or QFil to run the official firmware.
3. Select a file prog_emmc_firehose.mbn firmware.
4. Run the firmware in Firehose mode.

⚠️ Note: Incorrect Firmware in the EDL damage IMEI It's a modem module that will cause network loss, and it's recommended only for advanced users or service engineers.

Mi Account

Recovery Mode

Fastboot

EDL-regime

No, this is my first case.

-->

5. Use of service codes and hidden menus

Some Xiaomi models (especially older ones like the Redmi 4X or Mi A1) can bypass screen locking through service codes or hidden engineering menus, but with the release of MIUI 12 and later, most of these methods stopped working due to tighter security.

Current methods (tested on MIUI 14):

• 📞 Reset code: Enter dial ##7378423## (not working on all models).
• 🔧 Engineering menu: Dial ##4636##, then go to Testing → Clear App Data (can help with pattern lock failure).
• 📱 Safe Mode: Press the power button, hold off the "Stop" button until a request to switch to Safe Mode appears. In this mode, some locks are temporarily disabled.

⚠️ Note: Service codes may vary depending on the firmware region (Global, China, EEA). For example, on the Chinese versions. MIUI #4636### is often blocked.

6. Contact the Xiaomi Service Center

If all of these methods did not work, you need to contact an authorized service center.

• 🔒 Phones with Bootloader locked and enabled FRP.
• 📱 Devices that require an old password after reset (Xiaomi 13, Redmi) K60 newer).
• 💔 Hardware breakdowns (for example, the sensor does not work after a failed firmware).

What you need to unlock in the service:

1. Document confirming the purchase (check, warranty card).
2. Phone box with serial number (IMEI must match)
3. Passport of the holder (for identification).

⚠️ Note: Unofficial services may offer "circumvention" FRP» at a low price, but this often leads to:

• Lose the warranty.
• Violation of the NFC, Wi-Fi or Bluetooth modules.
• Blocking your Mi Account for suspicious activity.

💡

The official service is the only legal way to unlock phones with FRP (Factory Reset Protection) enabled on MIUI 13/14.

FAQ: Frequent questions about unlocking Xiaomi