The forgotten password on Xiaomi Redmi Go is a situation that many users of Xiaomi's budget smartphone face. Unlike flagship models, Redmi Go runs on Android Go Edition and has limited access recovery options. PIN-code too many times, the system will lock the device for 30 seconds, a minute or even require data input from Mi Account. PUK-code?
In this article, we will look at all the current ways to unlock Redmi Go, from official methods through the Mi Cloud to radical solutions like Hard Reset or firmware through Fastboot. It is important to understand that some methods will lead to complete loss of data (photos, contacts, messages) if the phone was not backed up, we will also explain how to avoid blocking in the future and what settings should be changed now.
1 Unlocking through Mi Account (official method)
The safest and most recommended method for Xiaomi is to use a tied Mi Account. If you have previously logged in to an account on a blocked Redmi Go, the chances of successful unlocking are high.
- 🔹 Go to Mi Cloud from a computer or other phone.
- 🔹 Enter your username (email or phone number) and password from your Mi Account.
- 🔹 In the Devices section, find your Redmi Go (may appear as tiare – model encoding).
- 🔹 Press Find the device. → Unlock and confirm the action through SMS email.
If the phone is connected to the Internet (via Wi-Fi or mobile network), the lock will be removed within 5-10 minutes. Importantly, the method works only when you are actively connected to the network. If the Redmi Go has disconnected mobile Internet and Wi-Fi, this method will not work.
⚠️ Note: If you do not remember the data from Mi Account, do not try to find a password - after 5 unsuccessful attempts, the account will be blocked for 24 hours.
2.Reset via Recovery Mode (Hard Reset)
Hard Reset is a radical method that will erase all data from your phone, including photos, apps and settings. It's worth using if other methods didn't work. On Redmi Go, the reset procedure is nuanced by the simplified Android Go firmware.
Instructions:
- Turn off the phone with a long press on the power button (10-15 seconds).
- Press the Power button + Volume up at the same time and hold for 10-15 seconds until the Mi logo appears.
- Release the buttons and you will be taken to the Recovery Mode (black screen with yellow text) menu.
- Use the volume buttons for navigation and the power button to select Wipe Data → Wipe All Data.
- Confirm the action by choosing Confirm and wait until the process is completed (1-2 minutes).
- Select Reboot to reboot.
After the reset, the phone will turn on in the "as new" state. You will need to go through the initial setting, including the binding of Mi Account (be sure to write down the data!).
Charge your phone at least 50 times%|Download Xiaomi drivers on PC (if you need Fastboot)|Prepare a standby SIM-card (for activation)|Make sure there are no important unsaved data
-->
⚠️ Note: Some versions of Redmi Go firmware after Hard Reset may require data entry from a Mi Account that was previously tied (protection) FRP). If you don't remember your username/password, the phone will become a brick, and only the firmware through Fastboot will help (see section 4).
3. Unlock through ADB (for power users)
If Redmi Go has been included in the debugging USB (USB Debugging, you can try to remove the lock through ADB (Android Debug Bridge: This method requires a computer, USB-Cable and basic knowledge of working with the command line.
Step-by-step:
- Download and install ADB Tools on your computer.
- Connect Redmi Go to PC via USB-cable (original or qualitative analogue).
- Open the command line (Win) + R → Type in cmd) and execute commands in order: adb devices (should display your device) adb shell su (if requests root rights, confirm on the phone) rm /data/system/gesture.key rm /data/system/password.key reboot
After the reboot, the password lock should disappear. If the commands don't work, try the alternative:
adb shell am start -n com.android.settings/.ChooseLockGeneric⚠️ Attention: Method C ADB It only works if the debugging is done. USB If you didn't activate this option beforehand, it's useless. Some Redmi Go firmware may not support su).
💡
If ADB does not see the device, try installing Xiaomi USB Drivers manually through Windows Device Manager. To do this, download the driver from the official Xiaomi website and update the device configuration in Manager.
4. Firmware through Fastboot (extreme case)
If all previous methods fail, it leaves the firmware running through Fastboot mode, a complex process that requires downloading the official firmware for Redmi Go (codename tiare) and using the Mi Flash Tool. Mistakes can turn the phone into a brick, so follow the instructions carefully.
What you need:
- 🔹 Windows computer 7/10/11 (64-bit).
- 🔹 Original. USB-cable (low-quality cables can interrupt firmware).
- 🔹 Fastboot firmware ROM For Redmi Go (select the most recent stable version).
- 🔹 Mi Flash Tool Programming.
Instructions:
- Turn off Redmi Go and switch to Fastboot mode: Press Power + Volume down for 10 seconds.
- Connect your phone to your PC. The Android Bootloader Interface should appear in Device Manager.
- Unpack the downloaded firmware (.tgz →.tar) in a folder without Cyrillic characters.
- Open the Mi Flash Tool, press Select and point the path to the firmware folder.
- At the bottom, select Clean all and click Flash.
- Wait for the end (5-10 minutes). The phone will reboot automatically.
| Problem. | Reason. | Decision |
|---|---|---|
| Mi Flash Tool doesn't see the phone | No drivers or cable faulty | Install drivers manually or try another cable |
| Error: Critical Partition Flashing is Forbidden | Loader locked. | Unlock Bootloader with Mi Unlock Tool |
| The phone does not turn on after the firmware | Incorrect firmware or interrupted process | Repeat the firmware with another version of ROM |
What to do if the Mi Flash Tool gives an error "Invalid Image"
5. bypassing FRP (Google Account) after resetting
If you need to enter data from Mi Account or Google Account (FRP protection) after Hard Reset Redmi Go, you can bypass this lock in several ways, the most reliable is to use an official tool from Xiaomi, but it requires proof of ownership.
Alternative methods (at your own risk):
- 🔧 Through SIM-Insert the map SIM supportive 3G, Call your phone from another device, and go to Settings quickly during the call. → Data resetting.
- 🔧 Specialist FRP-Tools: Programs like GSMT Flasher ADB or FRP Bypass APK (require a connection to the PC and enabled debugging USB).
- 🔧 Through the service center: Official partners of Xiaomi can remove FRP purchase-document.
On Redmi Go, FRP circumvention is complicated by Android Go, so universal methods (like TalkBack) often don't work. If you're not sure what you're doing, you better go to the service.
💡
FRP-If the phone was purchased with hands, the previous owner must untie his account via Mi Cloud before sale.
6.How to avoid blocking in the future
To avoid having a forgotten password problem on Redmi Go, follow these tips:
- 🔐 Set up a backup. PIN-Code: In the menu Settings → Block the screen, add an alternative way to unlock (e.g., a fingerprint). + PIN).
- 📧 Link Mi Account: Without a Xiaomi account, you lose official ways to restore your account.
- ☁️ Enable backup: In Settings → Google → Backup activate data storage to the cloud.
- 📝 Write down passwords: Keep PIN-Mi Account code and data in a secure location (e.g., Google Password Manager).
We also recommend that you turn off the automatic lock. SIM-map (PUK-For this purpose, enter in the telephone set:
##4636##Go to Phone Information → SIM settings and deactivate the PIN Lock option (if not required by the operator’s terms).