How to go to Recovery Mode on Xiaomi Redmi: a complete guide with pictures

Recovery of Xiaomi Redmi smartphone through Recovery Mode is one of the most popular procedures among users who have faced software failures, which allows you to reset the settings to factory, install official firmware or even unlock the bootloader without using a PC. However, the wrong actions in the backpack can turn the phone into a “brick”, so it is important to understand the nuances of working with it.

In this article, we will analyze all the current ways to log into Recovery Mode on Redmi Note models. 12/13 Pro, Redmi 10/11, POCO X5 and other devices on the base MIUI 14/15. Special attention will be paid to the differences between stock recavery (from Xiaomi) and custom (TWRP), And we'll also explain when you need each of them, and if your Redmi doesn't turn on, if it's stuck on the logo, if it needs to be reset, you'll find a work solution here.

What is Recovery Mode and why is it needed on Xiaomi Redmi?

Recovery Mode is a separate Android boot environment built into the firmware of the smartphone, which works independently of the main operating system and allows you to:

• 🔄 Reset to factory settings (useful when selling a phone or after a virus attack).
• 📦 Install official updates manually (if you have to do so) OTA-update is not working).
• 🔓 Unlock the bootloader to install custom firmware (requires a Mi Account).
• 🛠️ Restore the system after a failed update or failure.
• 🔐 Delete the pattern lock/password if you forgot the unlock data.

On the Xiaomi Redmi smartphones, two types of recovery are used:

1. Stock-stock (MIUI Recovery: limited in function, but safe for beginners, supports only official firmware and resets.
2. Castomy (TWRP) — Extended mode with support for backups, root rights and unofficial firmware.

⚠️ Attention: Use TWRP New Redmi models (released after 2022) may result in Mi Account blocking due to Xiaomi’s policy on combating custom firmware. XDA Developers.

If your smartphone loads normally, but you want to clear the cache or make a reset, stock recapvery is enough. ROM The Chinese version will be required. TWRP.

How to Sign in to Recovery Mode on Xiaomi Redmi: 3 working ways

The way you enter a receptacle depends on the state of the phone: is it on or off, is the sensor working, is the bootloader unlocked. We'll look at all the current methods, including bypassing the lock through the phone. ADB.

Method 1: Classic button combination (for switched off phone)

It is a versatile method that works on 90% of Redmi models, including Note 10 Pro, Redmi 9T and POCO M4 Pro. Suitable if the phone is completely off or hovers on the logo MI.

1. Press and hold the power button + increase volume at the same time.
2. Hold them for at least 10-15 seconds until the Mi logo and recovery menu appear.
3. On some models (such as the Redmi Note 8 Pro) you may need to clamp the power first. + Reduce volume and then switch to increase volume.

If nothing happens after 20 seconds of holding, try an alternative combination: power. + Both volume buttons. This works on Redmi. K50 and new flagships.

Method 2: Through the System Update menu (if the phone is turned on)

If the smartphone is working, but you need to reboot to the reset or install the update, use the built-in option:

1. Open Settings → About the phone → System update.
2. Click on the three dots in the top right corner and select Reboot to Restore Mode.
3. Confirm the action – the phone will automatically restart to the MIUI Recovery.

This method is the safest, as it does not require manipulation of buttons and eliminates the risk of accidental login to Fastboot.

Method 3: Through ADB (loader)

If you're fitted ADB-Drivers and debugging enabled USB, You can enter the Recavéri through the team:

adb reboot recovery

This method is useful if the physical buttons don't work or you're connected to a PC.

• 🖥️ Install Platform Tools from Google.
• 🔌 Connect Redmi to your computer and allow debugging.
• 📝 Put the command in. CMD terminal.

⚠️ Note: On models with a locked bootloader (Redmi Note 12 and later), the adb reboot recovery command can redirect you to Fastboot instead of a recap.

Recovery Mode interface on Xiaomi Redmi: menu analysis

After successful entry, you will see a menu in English or Chinese (depending on version). MIUI). It may look different, but the key options are always there. MIUI Recovery 5.0 (Relevant to the Redmi Note 11/12):

Navigation of the menu is done by the volume buttons (up/down) and power buttons (select (POCO F3, Redmi K40) touch control may work, but it is better to use physical buttons to avoid accidental pressing.

If you see a menu in Chinese, look for the location of the items (usually Wipe Data is the second one on top (TWRP).

💡

If the Recovery menu does not include Install Update, your smartphone uses a stripped-down version. MIUI Recovery. To install the firmware manually, you have to unlock the bootloader and install it. TWRP.

How to Reset Xiaomi Redmi to Factory Settings via Recovery

Hard Reset is the most reliable way to get your phone back to its original state.

• 📱 All installed applications and their data.
• 🔑 Google, Mi and other accounts.
• 📁 Photos, videos and documents in internal memory (files on the SD-map).
• ⚙️ System settings, including Wi-Fi passwords.

Before resetting, remove the memory card and SIM, Also make sure that the phone is at least 50% charged - interrupting the process can damage the firmware.

Step-by-step discharge instruction

1. Enter Recovery Mode (see section above).
2. Select the Wipe Data button (or Clear Data on older versions).
3. Confirm the action by selecting Confirm (usually you need to enter Yes or press power).
4. Wait until the process is complete (it can take 5-15 minutes).

Once reset, you will be asked to configure Redmi as new, and if the phone requires a password or a pattern lock, the lock will be removed.

⚠️ Attention: On models with MIUI 13/14 and the associated Mi Account after reset may require entering a login and password from the previous account (protection) FRP). If you don’t remember the data, use Xiaomi’s recovery service.

💡

Resetting over the Recovery does not remove the firmware or root rights. ROM Or they will be left behind when they are gone.

Install firmware through Recovery Mode: official and custom ROM

If your Xiaomi Redmi is not updated OTA Or you need to flash it after a failure, and you can recast it manually, and we'll look at both the official Xiaomi firmware and the custom one (like LineageOS).

Installation of official firmware (MIUI)

For this method, a stock is suitable MIUI Recovery. You're gonna need it:

• 📄 Firmware file in.zip format (download from the official Xiaomi website).
• 📁 Memory card or internal phone memory (if it is turned on).

Instructions:

1. Place the firmware file (for example, miui_REDMINOTE12Global_V14.0.2.0.TMWMIXM.zip) memory-root.
2. Enter the Recavérie and select Install Update.
3. Specify the path to the firmware file and confirm the installation.
4. Wait until the process is complete (don't interrupt!) and the phone will restart automatically.

If the firmware is not seen on the menu, check:

• 🔍 File name correctness (must not contain Cyrillic or spaces).
• 📌 The format is.zip, not.tgz or.rar.
• 🔄 Version compatibility (for example, firmware for Redmi Note 11 will not work for Note 11 Pro).

Installation of custom firmware (TWRP required!)

For the installation of Global ROM The Chinese version or alternative firmware (Pixel Experience, ArrowOS) is required:

1. Unlock the bootloader through the Mi Unlock Tool.
2. Install TWRP Recovery (instructions are available on the official website).
3. Download custom firmware and GApps (if you need Google services).

Installation process through TWRP:

1. Boot in. TWRP (The button combination is the same, but the menu will be blue).
2. Click on Wipe → Advanced Wipe and tick Dalvik, Cache, System, Data.
3. Return to the main menu, select Install and specify the firmware file.
4. After installing the firmware, repeat the step for GApps (if necessary).
5. Reboot to the system (Reboot → System).

⚠️ Attention: On new Redmi models (2023-2026), Xiaomi blocks custom firmware installation through Anti-Rollback check. Before firmware check the Anti version in the bootloader settings (fastboot getvar anti command). Installing firmware with a lower Anti number will turn the phone into a brick».

Frequent errors in Recovery Mode and how to fix them

Even when following the instructions, users face problems in the Recovery, and consider the typical errors and their solutions:

If after manipulations in the Recovery phone stopped turning on, try:

• 🔌 Connect to charging for 1-2 hours (the battery may have run out during the process).
• 🖥️ Switch through Fastboot with Mi Flash Tool (requires PC).
• 📞 Contact the service center if you are not sure of your actions.

Safety and security precautions when working with Recovery Mode

Mistakes in the recavator can lead to data loss, Mi Account lockdown or phone breakdown, and follow these rules to avoid problems:

• 🔋 The battery must be at least 50% charged, and interruption of the process due to discharge can damage the firmware.
• 📡 Disable all accounts (Google, Mi) before resetting if you plan to sell your phone.
• 🔍 Check firmware on official resources. Downloading from dubious sites is fraught with viruses or a brick».
• 🔑 Do not delete modem, boot, or recovery sections in TWRP without understanding the consequences.
• 📱 Save it. IMEI before the firmware (*#06# command) It can be dropped on rare occasions.

Special care should be exercised by owners of new models (Redmi Note 13, POCO X6): Xiaomi tightened policy on custom firmware.Installation TWRP informal ROM may lead to:

• 🚫 Blocking of Mi Account (requires support).
• 🔒 Loss of warranty (if the loader was unlocked).
• 📵 Denial of service in service centers.

If you're a beginner, start with the official methods (stock recaveri, firmware through the Mi Flash Tool). TWRP custom ROM It is better to leave for “advanced” devices that are not sorry to lose.

💡

On dynamic partition models (Redmi Note 10 and later), resetting over the Recovery may not clear all the data. → Format Data in the TWRP (It erases everything, including internal memory!).

FAQ: Answers to Frequent Questions