How to reboot Xiaomi Redmi Note 8 Pro: all the ways and nuances

Xiaomi Redmi Note 8 Pro is one of the most popular smartphones of the brand, but even it is not immune to software failures. Screen freeze, errors after the MIUI update or sudden shutdown of applications cause users to look for ways to force the reboot. In this article, we will analyze all possible methods, from standard reboot to emergency measures when the device is completely inoperable.

It's important to understand that rebooting and factory resetting are different procedures. The first one just restarts the system, saving all the data, and the second deletes it irrevocably. We'll focus on secure reboot methods that won't damage the files on the phone. If your Redmi Note 8 Pro doesn't respond to any actions, there's a section at the end of this article on how to get out of the brick.

Before you start, check the battery power - at a level below 10%, a forced reboot can cause the phone to turn off permanently.

1. Standard reboot via menu

The easiest and safest way is to use the built-in MIUI settings. This is suitable if the phone responds to touch, but is unstable (for example, brakes or apps spontaneously close).

Instructions:

• 📱 Press and hold the power button (located on the right end of the case) for 2-3 seconds.
• 🔄 In the menu that appears, select Reboot (or Restart in English firmware).
• ⏳ Confirm the action and wait until the process is completed (usually takes up to 1 minute).

If the power button doesn’t work, try an alternative way through the settings:

1. Open the Settings. → The phone.
2. Slip on the Reboot item at the bottom of the screen.
3. Confirm the action at the request of the system.

💡

If the phone brakes again after the restart, clear the cache in the Settings menu → Storage → Clear the cache. This will delete temporary files without affecting personal data.

2. Forced reset (Hard Reset)

When the Redmi Note 8 Pro is completely frozen and does not respond to touches or buttons, hardware reboot is required, a technique that simulates battery extraction (although it is not removable in modern smartphones) and resets all temporary processes.

Warning: Not to be confused with factory reset! Forced reboot does not delete data, but interrupts all ongoing operations (e.g., installing applications or copying files).

How to do this:

1. Press and hold the power button and increase the volume at the same time.
2. Hold them for at least 10-15 seconds until the screen goes out and the Redmi logo appears.
3. Release the buttons - the phone will start loading in normal mode.

⚠️ Warning: If the smartphone is loaded for longer than 5 minutes or restarts cyclically, this may indicate firmware damage.

Make sure your phone is not connected to charging (short circuit risk)

Check the level of charge (minimum 20%)

Remember the button combination (Power + Volume Up)

Do not release the buttons before the time (hold until vibration)

-->

3. Restart in Safe Mode (Safe Mode)

If the phone turns on but doesn't work properly because of viruses or conflicting apps, Safe Mode will help, it shuts down all third-party programs, and you can remove the problem software.

Activation algorithm:

• 🔘 Turn off the phone in the standard way (holding the power button).
• 🔄 Turn it on by holding the power button and reducing volume at the same time.
• 🛡️ Release the buttons when the Safe mode sign appears at the bottom of the screen.

In this mode:

• 📱 Only system applications (e.g. Settings, Phone, Messages) work).
• 🚫 All downloaded games and utilities are disabled.
• 🔍 You can remove virus or conflicting software through Settings → Annexes.

To get out of Safe Mode, simply restart your phone in the usual way.

Once a day.

Once a week.

Only when it fails.

I never reboot.

-->

4.Reboot via Recovery Mode

Recovery Mode is a service recovery mode that allows you to restart your phone even when there are serious crashes. It is useful if the Redmi Note 8 Pro does not load beyond the logo or restarts cyclically.

Step-by-step:

1. Turn off the phone (hold the power button for 20 seconds when you freeze).
2. Press the power button and increase the volume at the same time.
3. Release the buttons when the Recovery menu appears (usually with a robot image and the words No command).
4. Use the volume buttons for navigation and the power button to select the Reboot system now.

If the menu is in Chinese, focus on the icons:

• 🔄 — Reboot system (similar to Reboot system now).
• 🗑️ — Reset to factory settings (do not choose this item without the need to!).

⚠️ Attention: Recovery Mode doesn't have touch gestures, just volume and power buttons. Don't pick items unless you're sure they're there!

5.Reboot via Fastboot (for power users)

Fastboot is a firmware mode that is used for deep system recovery, which is suitable if the phone does not respond to other methods or you need to reflash the device. Be careful: improper actions in this mode can lead to data loss or “bricking” the phone.

How to restart via Fastboot:

1. Turn off the phone.
2. Press the power button and reduce the volume at the same time.
3. Release the buttons when a hare in a hat-eared hat appears on the screen (Fastboot logo).
4. Connect your phone to your PC through USB-cable.
5. On your computer, open the command line and type: fastboot reboot

If you need to not just reboot, but reflash the phone, use the commands:

• 🔄 Recovery: Fastboot Reboot Recovery
• 📱 Reboot to normal mode: fastboot reboot system

To work with Fastboot will require Xiaomi drivers and utility ADB/Fastboot Tools. you can download them from the official website of Xiaomi or through the Xiaomi Flash Tool.

💡

Fastboot mode is the last chance to bring your phone back to life if other methods have failed, but without firmware experience, you should go to a service center.

6 What to do if the phone does not restart

If none of the methods worked, and the Redmi Note 8 Pro remains a brick (it doesn’t turn on, it doesn’t respond to charging), the reasons may be hardware or software.

If you suspect a hardware malfunction, don’t try to disassemble the phone yourself – the Redmi Note 8 Pro uses glue to fix the battery and plumes, and sloppy actions can exacerbate the problem.

For software failures, try the following:

• 🔌 Connect your phone to charge for 10-15 minutes, then repeat the forced reboot.
• 🖥️ If you have access to a PC, try flashing your phone through the Mi Flash Tool (instructions on the forum). 4PDA).
• 📞 Contact Xiaomi via official website or chat in Mi Community.

7. Failure prevention: how to avoid frequent reboots

Regular crashes of the Redmi Note 8 Pro are often not due to hardware defects, but to software errors. By following these tips, you will reduce the risk of freezes:

• 📲 Update. MIUI Up to the latest stable version (check in Settings) → The phone. → Updating the system).
• 🧹 Clean the cache every 1-2 weeks (via Settings) → Warehouse).
• 🚫 Do not install applications from unknown sources (virus risk).
• 🔋 Avoid battery drain (keep the charge at 20–80%).
• 📱 Do not overheat your phone (do not play heavy games when charging).

It is also useful to disable unnecessary background processes:

1. Go to Settings → Battery and Performance → Battery Management.
2. Select applications that don’t need to work in the background and turn off the AutoRun option for them.

If the phone started to brake after the MIUI update, try to roll back to the previous version via Recovery Mode (Apply update → Choose from storage).

FAQ: Frequent questions about the Redmi Note 8 Pro reboot