How to Reboot Xiaomi: 7 Ways for All Devices

Rebooting Xiaomi devices is a standard procedure that helps solve most software failures, from interface freezes to network connectivity issues. However, not all users know that there are several ways to restart the system, and each of them is suitable for different situations, for example, a soft reboot through the menu is suitable for a scheduled update, and a hard button reset will save the device when it freezes completely.

In this article, we will discuss all the current reboot methods for Redmi, POCO, Mi smartphones, as well as Mi TVs and Mi Routers. Particular attention will be paid to the hidden functions of Recovery mode, which allow you to restart the device even when the firmware is damaged. If your gadget does not respond to presses or cyclically restarts, here you will find a solution.

The safest and most recommended way is to use built-in system tools, which is suitable for all Xiaomi devices running MIUI or HyperOS, as well as for TVs running Android TV.

To perform the reboot:

📱 On your smartphone: open Settings → The phone. → Reboot (or hold the power button and select Reboot»).
📺 On TV: Go to Settings → The device → Reboot or press Home → Settings → All settings → System system → Reboot.
📶 On the router: in the web interface (192.168.31.1) select System Tools → Reboot.

The advantage of this method is to save all data and open applications (if the system is not getting stuck), but if the device does not respond to touches or buttons, you will have to use alternative methods.

📊 How often do you reboot your Xiaomi device?

Once a week.

Only when it fails.

Never.

I don't know how to do that.

2. Forced button reset (Hard Reset)

If a Xiaomi smartphone or TV is completely frozen and does not respond to commands, hardware reboot will help, a method that simulates battery extraction (even on non-removable batteries) and resets all temporary data into RAM.

Instructions for smartphones:

Hold the Power + Volume button up (or Volume Down for some models) for 10-15 seconds.
When the Mi logo or vibration appears, release the buttons.
If the device doesn’t respond, try Power + Volume up + Loud down (for older models).

For Mi TVs:

🔌 Turn off the power outlet for 30 seconds, then turn it back on.
🔄 If there is a physical Reset button (usually on the back), press it with a thin object (clip) for 5-7 seconds.

Turn off the charger.

Make sure that SIM-The card and memory card are inserted correctly

Remember the current time (to check sync after reboot)

Do not press the buttons longer than 20 seconds to avoid resetting.-->

⚠️ Note: On some models POCO F1, Redmi Note 8 Pro and Mi 9 long-term button retention can start Fastboot mode instead of rebooting.

3.Reboot via Recovery Mode (for power users)

Recovery Mode allows you to restart your device even when your firmware or bootloop is damaged, a method that is useful if your smartphone only turns on before the Mi logo and doesn’t go on.

How to log in to Recovery:

Turn off the device (forced if necessary).
Keep Power + Volume up until the Android robot menu appears.
Use the volume buttons for navigation and the power button to select the Reboot system now.

In Recovery, options are also available:

🔄 Wipe data/factory Reset – Complete reset (deletes all data!).
📥 Apply update from ADB — computer-mounting.
🛠️ Mount /system — mounting.

Xiaomi model	Combination for Recovery	Features
Redmi Note 10/11	Food + Volume up	Menu in Chinese – Use the power button to confirm.
POCO X3/X4	Food + Volume up	Long hold (>20 seconds) starts Fastboot.
Mi 11/12	Food + Volume up	Supports touch input in Recovery.
Mi TV 4S/5	Reset button on the body	A paper clip or toothpick is required.

What happens if Recovery does not open?

If only the Mi logo or black screen appears after holding the buttons, this can mean: 1. Recovery section is damaged (reflashing through Fastboot is required). 2. Volume button is faulty (try using ADB). 3. EDL device (you need an authorized Xiaomi account to unlock).

4.Reboot through ADB (for developers)

If you have access to a computer and USB debugging enabled, you can reboot the device via the ADB command. This method is useful for automatic scripts or when physical buttons don’t work.

Instructions:

Connect your smartphone to your PC via USB (use the original cable!).
Open the command line (Win + R → cmd) and type: adb devices Make sure the device is identified (serial number should appear).
Run the reboot command: adb reboot For reboot in Recovery: adb reboot recovery In Fastboot: adb reboot bootloader

If the ADB does not recognize the device:

🔌 Check if debugging is included in Settings → The phone. → Version. MIUI (Press 7 times, then return to Additional → For developers).
🖥️ Install Mi drivers USB Driver from the official website.
🔄 Try another one. USB-port.

adb shell reboot -p

This simulates a “soft” shutdown, similar to pressing the power button.-->

5. Automatic reboot on schedule

The auto-reboot feature is useful for maintaining system stability, especially on Mi TVs and routers that run 24/7. Regular restarting helps clear cache and prevent slowdowns.

How to set up:

On smartphones (requires MIUI 12+):

Open Settings → Special Options → Automatic Reboot.
Set the time (e.g. 3:00 AM) and frequency (daily/weekly).
Activate the option to Clean Memory when restarting.

On Mi TVs:

📅 Go to Settings. → System system → Sleep/wake-up timer.
🔄 Select Automatic Reboot and set the interval (e.g. once every 3 days).

On Mi Router routers:

⚙️ In the web interface (192.168.31.1) select System Tools → Scheduled reboot.
🕒 Specify the time (recommended night time, for example 4:00 am).

⚠️ Note: On smartphones with an unlocked bootloader, automatic reboot can lead to data loss if custom recovery is installed (for example, custom recovery is installed, TWRP). Before setting up, check firmware integrity.

6.Reboot during the boot cycle (Bootloop)

Cyclical reboot (or bootloop) is a situation where a device is constantly restarted at the stage of the Mi logo and does not boot into the system. Causes: a failed update, damage to the boot partition or conflict of Magisk modules.

Solutions:

🔧 Reset via Fastboot: Keep Powering + Volume down to log into Fastboot. Connect the device to your PC and execute: fastboot reboot If it doesn't help, run through boot.img: fastboot flash boot boot.img fastboot reboot

Mi Flash Tool

Download the official firmware for your model from the Xiaomi website.
Unpack the archive and launch the Mi Flash Tool.
Select Clean All mode and press Flash.

EDL

If Fastboot is not available, you can use Emergency Download Mode (requires an authorized Xiaomi account and Deep Flash Cable box).

💡

If the device gets into the bootloop after installing custom software (like LineageOS), first try rolling back to the stock firmware via Fastboot. Using EDL can block the bootloader on some models (like the Redmi Note 9 Pro).

7.Reboot of Xiaomi routers and smart devices

Xiaomi’s smart devices (routers, light bulbs, cameras) also require periodic restarts to keep things running, such as the Mi Router 4A or AX3600, which can start to slow down after days of continuous operation.

Rebooting methods:

📶 Through the Mi Home app: Open the app and select your router. Go to Settings → Reboot.

Through the web interface:

Connect to the router network and open 192.168.31.1 in the browser.
Log in (login and password from the sticker on the router).
Select System Tools → Reboot.
🔌 Physical reboot: Turn off the router power for 10 seconds, then turn it back on. for Mi Wi-Fi Repeater, press and hold the Reset button for 5 seconds.

FAQ: Frequent questions about Xiaomi reboot

❓ Why Xiaomi’s smartphone doesn’t reboot through the menu?

If the device does not respond to the reboot command, possible causes: 🔋 Battery discharged (plug charging and wait) 10 minute). 🤖 Systemic process damaged system_server (Try Recovery). 🔒 Installed button locking software (e.g. Knox or Device Policy) Solution: Force button reboot or connect via ADB.

❓ How to Reboot Xiaomi if the Screen is Not Working?

If the screen is not responsive to touch, but the device is on: Connect your smartphone to your PC and use ADB: adb reboot If ADB is off, hold Power + Volume up 15 seconds for forced reboot. For TVs: turn off power for 1 minute or use the Reset button.

❓ Can you reboot Xiaomi every day?

Regular reboot (for example, every 1-2 days) is useful for: 📱 Smartphones – clears the cache and frees RAM. 📺 TVs – prevents Android from hanging TV. 📶 Routers, which relieves the load on the processor, but frequent reboots (every few hours) can reduce the life of flash memory on cheap models (for example, Redmi). 9A). The optimal interval - once every 2-3 days.

❓ What to do if Xiaomi asks for a password after a reboot?

If the device requires PIN/password: 🔑 Enter the last password you used (Safe Mode may have been enabled). 📱 If you forget your password, reset via Recovery (Wipe data will delete all data!). 🔧 To unlock without losing data, use Mi Account (requires account binding). TV After resetting, you may need to reset your Google account.

❓ How to Cancel Automatic Reboot on Xiaomi?

To disable the scheduled reboot: 📱 On a smartphone: Settings → Special facilities → Automatic reboot → Shut down. 📺 On TV: Settings → System system → Sleep/wake-up timer → Delete the task. 📶 On router: 192.168.31.1 → Systemic tools → Cancel the reboot.