Hard Reset on Xiaomi Redmi Go: 3 working ways to reset to factory settings

Xiaomi Redmi Go is a budget smartphone based on Android Go Edition, which is still popular among users who appreciate simplicity and reliability. However, even such a device can start to slow down, emit errors or require a complete reboot of the system.

In this article, you will find all the current ways to reset for Redmi Go, including methods through the settings menu, hardware buttons and Fastboot mode. We will also discuss how to avoid data loss, what to do if the phone does not turn on, and answer frequent questions from users. Instructions are suitable for all versions of the firmware MIUI And Android Go on this device.

What is Hard Reset and When is it Needed on Redmi Go?

Hard reset is the complete removal of all user data and return of the smartphone to the factory state. On Xiaomi Redmi Go, the procedure erases:

• 📱 Installed applications and their data
• 📸 Photos, videos and music (if not saved) SD-map)
• 📞 Contacts, SMS Call log (if not synced with Google)
• ⚙️ All personal settings (wallpaper, sounds, Wi-Fi passwords)

The procedure is necessary in the following cases:

• 🐢 The smartphone is slowing down or constantly overheating.
• 🔄 Hangs on the Xiaomi logo or cyclically reboots
• 🔒 Forgot the pattern lock or PIN-unlock
• 📲 You need to sell/give your phone and clear all the data.
• 🛠️ After a failed firmware update

⚠️ Warning: On Redmi Go, resetting via Recovery can take up to 10 minutes - don't interrupt the process, even if the screen doesn't react for a long time).

If the problem is related to a hardware malfunction (such as a broken screen or a power button), a hard reset won’t help – repairs will be required at a service center.

Preparing for resetting: how to save important data

Before you make a hard reset, be sure to copy important information. Redmi Go has several ways to back up:

If the screen doesn't respond to touch, but the phone turns on, connect it to your PC and use the Mi PC Suite program to create a backup.

1. Download Mi PC Suite from the official Xiaomi website
2. Connect Redmi Go over USB (enable USB debugging in the developer settings)
3. Select the Backup section and follow the instructions

⚠️ Attention: Redmi Go with Android 8.1 Oreo Go USB If you forgot to turn it on beforehand, it will be impossible to recover data from the PC.

💡

If you have custom firmware installed, check compatibility with official Recovery before resetting. Some modified versions may block access to factory settings.

Method 1: Hard reset via the settings menu (if the phone is running)

The easiest method is to reset directly from the MIUI interface, which is suitable if:

• 📱 The phone is turned on and reacts to touch.
• 🔓 You remember the unlock password.
• ⚙️ You need to clean the device quickly before selling it.

Step-by-step:

1. Open Settings (cog icon on the desktop)
2. Scroll down and select Additional
3. Move to Recovery and Reset
4. Slip on Reset settings
5. Select to erase all data (PIN if necessary)
6. Confirm the action with the button Reset the phone settings

It takes 3-5 minutes, and when it's done, the phone will automatically restart and prompt you to set it up as new.

Make sure the battery is charged > 50%|Save important data|Remember your Google account details (required after resetting)|Turn it off. SIM-map SD-map (optional)-->

If after resetting the phone requires you to enter an old Google account (FRP protection), but you do not remember it, use the instructions at the end of the article.

Method 2: Reset via Recovery Mode (if the phone is not turned on)

If Redmi Go is stuck on the logo, reboots cyclically or doesn’t respond to the screen, use Recovery Mode, which works even without access to the main system.

Instructions for Xiaomi Redmi Go:

1. Turn off the phone (press the power button for 10 seconds)
2. Press simultaneously: Volume Up button (Power button)

Mi

Recovery

In the Recovery menu, the volume buttons (Volume Up/Down for navigation, Power for selection) are used.

1. Wipe Data → Wipe All Data (complete reset)
2. Confirm the action by choosing Confirm
3. After you complete the process, select Reboot → Reboot to System.

Step-by-step:

1. Install Mi Flash Tool and Xiaomi drivers on PC
2. Unpack the downloaded firmware in a folder without Cyrillic symbols
3. Turn off Redmi Go and press Volume Down + Power to log into Fastboot
4. Connect your phone to your PC via USB
5. Launch the Mi Flash Tool, select the firmware folder and press Refresh
6. Once the device is detected, press Flash and wait for completion (5-10 minutes)

Important: This method completely overwrites the firmware, so:

• ✅ Resolves most software errors
• ❌ Erase all data without the possibility of recovery
• ⚠️ Can lead to a breeze if you choose the wrong firmware

💡

Fastboot firmware is the only way to bring Redmi Go back to life if it doesn’t load into Recovery and respond to a reset via the menu.

Frequent problems after hard reset and their solutions

Even after a successful reset, Redmi Go users may face difficulties.

1. Requirement to enter an old Google account (FRP)

If, after a reset, the phone asks you to enter the account information that was previously linked, this is FRP (Factory Reset Protection) protection.

1. Connect to Wi-Fi on the settings screen
2. Go back and select Not to connect.
3. On the Google account input screen, tap the text field, then select Add Account.
4. Enter any Google account (even a new one)

If this method does not work, use it. FRP Bypass APK (need OTG-cable).

2. the telephone shall not be switched on after discharge

Possible causes and solutions:

3.Net loss after reset

If the cellular signal is missing:

1. Check if it's inserted. SIM-map
2. Go to Settings. → SIM-maps and mobile networks
3. Select Network Search Manually
4. If it doesn’t help, reset your network settings to Settings → System → Reset → Network Settings Reset

💡

If after reset, camera or sensor functions are lost, check the integrity of the firmware through the Fastboot with the team

fastboot getvar all

camera

sensors

How to bypass FRP (Google account) on Redmi Go after reset

FRP (Factory Reset Protection) is activated on all Android 5.1+ smartphones if a Google account was attached to the device. Redmi Go can be bypassed in several ways:

Method 1: Settings (if you have access to Wi-Fi)

1. On the Welcome Screen, connect to Wi-Fi
2. Go back and select an emergency call.
3. Type #4636## (test menu opens)
4. Go back to the main menu and add a new Google account.

Method 2: With the help of OTG-cable

It will require:

• 🔌 OTG-adapter
• 💾 File drive FRP Bypass APK

1. Connect the flash drive via OTG to the phone
2. In the FRP menu, select View Files
3. Install. APK-file and follow the instructions of the utility

⚠️ Note: Using third-party utilities to bypass FRP This may violate Google's security policy. MIUI (above 10.2) this method may not work – you will need firmware through Fastboot.

FAQ: Answers to Frequent Questions