How to Reset Xiaomi Redmi Note 10 Pro to Factory Settings: A Complete Guide to Error Solutions

Resetting the Xiaomi Redmi Note 10 Pro to factory settings is a procedure that can be required in a variety of situations, from preparing a smartphone for sale to eliminating critical errors in the MIUI. However, not all users know that an incorrect reset can turn a phone into a “brick”, especially if the device was locked through Mi Account or had an informal firmware.

In this article, we will discuss three official reset methods (through settings, Recovery and Fastboot), and how to avoid typical errors. We will focus on the nuances associated with the Redmi Note 10 Pro - for example, why the IMEI may disappear after a reset or the NFC module will stop working. If you plan to sell the phone or just want to return it to a "clean" state, read on.

Important: the reset procedure removes all data from internal memory, including photos, contacts and installed applications. Even if you use Mi Cloud, some settings (such as Wi-Fi passwords or banking application data) will not be restored automatically.

1.Resetting preparation: what to do in advance

Before you start resetting, make sure you follow all the critical steps.Neglecting preparation can lead to data loss or even locking the device (for example, if Xiaomi's Find Device feature is activated on the phone).

First, check the battery status: the charge level should be at least 50%. Recovery or Fastboot reset can take up to 10-15 minutes, and if the phone turns off in the process, it can damage the system files. SIM-MicroSD card and memory card – they will not be affected, but their presence can slow down the process.

• 🔋 Battery charge: at least 50%, better than 70%+.
• 📱 Backup: Use Mi Cloud, Google Account or local backup via Settings → The phone. → Backup.
• 🔐 Accounts: remember the username/password from Mi Account – after reset, the phone may require you to enter this data.
• 📡 Wi-Fi network: if you reset through settings, connect to a stable network (downloading updates after reset will take you a long time to reset). ~300-500 MB).

If you plan to sell the phone, be sure to log out of Mi Account before reset (Settings → Xiaomi Account → Sign out). Otherwise, the new owner will not be able to activate the device without your data!

💡

If you have forgotten your Mi Account password, restore it in advance at account.xiaomi.com. After resetting, your phone can lock for 72 hours if you enter the data incorrectly!

2. Method 1: Reset via MIUI settings (most secure)

This method is suitable if the phone is turned on, you have access to the settings menu, and you haven't forgotten the pattern lock or PIN-The main advantage is the minimum risk of errors, since the reset is normal.

Instructions:

1. Open Settings (the gear icon on the main screen).
2. Go to the About Phone section. → Backup and reset.
3. Select Resetting → Erase all data.
4. Enter a password (if requested) and confirm the action.
5. Wait for the reboot (it will take 5-10 minutes).

Once the phone is rebooted, it will suggest you set it up as new. If you’ve previously synced data with Mi Cloud or Google, some of the information (contacts, photos) can be restored at the initial setup stage.

Make sure your phone is 50%+ charged

Disable two-factor authentication in Mi Account (if enabled)

Remember the Wi-Fi password (required after reset)

Get out. SIM-card and microSD (optional)

-->

⚠️ Note: If the phone has custom firmware installed (such as Pixel Experience or LineageOS), resetting through settings can lead to a logo getting stuck. MI. In this case, use methods 2 or 3.

3. Method 2: Reset via Recovery Mode (if the phone is not turned on)

If the Redmi Note 10 Pro is stuck on the logo, does not respond to touches, or is locked with a pattern lock you forgot, a reset via Recovery will help.This mode allows you to return the phone to factory settings without access to the main system.

For entrance to Recovery:

1. Turn off the phone (press the power button for 10 seconds).
2. Press the Power button + Volume up at the same time and hold for 10-15 seconds until the Mi logo appears.
3. Release the buttons and you will see a menu in English or Chinese.

In the Recovery menu, the volume buttons (Up/Down for navigation, Power for selection) are controlled.

1. Choose Wipe Data → Wipe All Data.
2. Confirm the action (usually you need to select Confirm or enter Yes).
3. Once you have finished, select Reboot → Reboot to System.

If the menu is in Chinese, focus on the icons: the icon “nuts» (🧹) — This is Wipe Data, and the arrow is in a circle (🔄) — restart.

Method 3: Reset via Fastboot (for power users)

This method requires a computer and installed ADB/Fastboot drivers.

• 🔄 The phone is getting stuck in bootloop (cyclical reboot).
• 🔒 Password is forgotten and Recovery is blocked.
• 🛠️ You need to reflash your phone after a failed update.

Warning: Incorrect commands in Fastboot can permanently damage the device. If you are not sure about your actions, contact the service center.

Step-by-step:

1. Install Platform Tools (ADB and Fastboot) on PC.
2. Turn off the phone and press Power + Volume down to enter Fastboot Mode (a hare in a hat-out-of-the-box will appear).
3. Connect your phone to your PC via USB (use the original cable!).
4. Open the command line in the folder with platform-tools and type:

fastboot devices

(Your Redmi Note 10 Pro should be displayed.)

fastboot erase userdata


fastboot erase cache




fastboot reboot

If after the reboot the phone requires the entry of Mi Account data, and you do not remember them, you will have to use the official Mi Unlock Tool (it takes 7-15 days to unlock).

⚠️ Attention: fastboot erase commands delete data irrevocably. If you accidentally type in the fastboot erase system, the phone will stop booting and require a complete flashing!

Yes, through settings | Yes, through Recovery | Yes, through Fastboot | No, never | I don't know what that-->

5.Typical post-reset errors and how to fix them

Even after a successful reset, the Redmi Note 10 Pro may not behave properly.

• 📶 No net: Lost IMEI or SIM-Solution: Refuse the modem module via Fastboot or restore IMEI using the engineering menu (#4636##).
• 🔒 Requires Mi Account: Phone locked after reset. Solution: Enter the account to which the phone was linked. If you don't remember, use the Mi Unlock Tool.
• 🔋 Quickly discharges: After resetting, the battery sits down in 2-3 hours.Solution: Calibrate the battery (discharge to 0%, then charge to 100% without interruptions) or reset the battery settings in Settings → Battery → Settings ⚙️ → Reset.
• 📱 It's not working. NFC or fingerprint sensor: Usually associated with damage to the partition persist. persist.img via Fastboot:

fastboot flash persist persist.img


fastboot reboot

If the phone gets too hot after the reset, check the background processes in Settings → Apps → Permissions → Auto Run. Often preinstalled Xiaomi services like Mi Video or GetApps are to blame.

💡

If the speaker is missing after reset, check the settings for Settings → Sound → Equalizer. Sometimes the reset resets the sound profile to Quiet.

6.How to recover data after reset

If you haven't backed up, the chances of getting your deleted data back are minimal, but there are, and the rule of thumb is, don't write new files to your phone after you reset, or they'll wipe the old data.

Recovery methods:

• 🖥️ Through PC: Use programs like DiskDigger or Recuva (requires root rights). Connect your phone in mode MTP And scan your internal memory.
• ☁️ Cloud Copies: Check Mi Cloud (i.mi.com) or Google Photos/Disk. Even if the sync was disabled, some data may have been saved.
• 📁 Local backups: If you have made a backup through Settings → Backup, connect your phone to your PC and find the backup file in the folder MIUI/Backup.

You can use SMS Backup & Restore to recover SMS and calls (if you have previously made a backup), but data from messengers (WhatsApp, Telegram) is almost impossible to recover - they are stored in encrypted databases.

⚠️ Note: Data recovery software is often recognized by antivirus software as potentially dangerous, download it only from official sites (for example, DiskDigger) and turn off protection while working. MIUI (Settings → Annexes → Security → Play Protect).

7. Alternatives to resetting: when can you do without it

Sometimes, problems with the Redmi Note 10 Pro are solved without a complete reset.

• 🐢 Phone brakes: Try clearing the cache through Settings → Warehouse → Clear the cache. Also turn off animation in Settings. → The phone. → Version. MIUI (Press 7 times, then install animation in the Developer Settings = 0.5x).
• 📵 Mobile network not working: Switch network mode to Settings → SIM-maps and mobile networks → Network type 4G (preferably).
• 🔊 Missing sound: Check if Do Not Disturb or Sound effects are activated in Settings → Sound.
• 🔒 Forgotten pattern lock: If you have Mi Account sync enabled, you can unlock your phone through i.mi.com/find (Find Device function).

If the problem is with the MIUI update, try retracing to the previous version via Recovery (you need a firmware file with the.zip extension).

1. Download the necessary firmware from the official Xiaomi website.
2. Place the file in the root of the phone’s memory (folder) downloaded_rom).
3. Log in to Recovery and select Install update.zip.

FAQ: Frequent questions about resetting Xiaomi Redmi Note 10 Pro