How to reset Xiaomi Redmi 7A to factory settings if you forget your password

A forgotten password on the Xiaomi Redmi 7A is a nasty situation, but it’s solvable. Even if you can’t unlock the screen, you can reset the device to factory settings in several ways. The main thing is to understand that a complete reset will remove all data from the phone: photos, contacts, messages and installed applications. So before starting the procedure, make sure that you have backups of important information (for example, in the Mi Cloud or on your computer).

In this article, we will discuss three official reset methods: through Recovery Mode, using a Mi Account (if it was linked), and through Fastboot mode for power users. Each method has its own nuances, from ease of execution to preparation requirements. You will also learn how to avoid common errors, such as losing access to the device due to a blocked bootloader, and what to do if the phone does not respond to standard commands.

1.Resetting preparation: what to do in advance

Before you start resetting, follow a few critical steps to avoid additional problems and save at least some of the data.

Check your Mi Account binding. If you have previously logged in on your phone, the chances of regaining access without losing data are higher. You can check your account through account.xiaomi.com – if the device appears on the associated list, use the Find Device reset method (section 3).

Charge the battery. Make sure the Redmi's charge level is up. 7A Interrupting the reset process due to a discharged battery may lead to software failure and the need to firmware through the battery EDL-regime.

Prepare the cable and the computer (if you plan to use the Fastboot) and you will need the original one. USB-cable (not cheap analogues!) and PC with drivers installed ADB/Fastboot. For Redmi. 7A Suitable drivers from Qualcomm or universal from Xiaomi.

• 🔋 Charging: at least 50%, ideal - 70% and above.
• 📱 Mi Account: Check the binding at account.xiaomi.com.

⚠️ Attention: If on Redmi 7A was included OEM Unlock in the developer settings, a Fastboot reset can block the bootloader, in which case you will need an official unlock through the Mi Unlock Tool, which takes up to 720 hours (30 days) of waiting!

2. Method 1: Reset via Recovery Mode (without a computer)

The easiest method is to use the built-in Recovery Mode, which does not require a PC connection and works even if the phone is completely locked, but there is a caveat: some versions of MIUI for Redmi 7A may require a password to be entered in Recovery. If this is your case, move to method 2 or 3.

Step-by-step:

1. Turn off the phone with a long press on the power button (10-15 seconds).
2. Press the Volume Up (+) and Power buttons simultaneously.
3. Hold them until the Mi logo appears (usually 5-10 seconds), then let them go.
4. From the Recovery menu, select a language (if available) and go to the Wipe Data (or Clear Data) section.
5. Confirm the reset by selecting Wipe All Data → Confirm.
6. Wait for the process to complete (1-3 minutes) and restart your phone via Reboot.

If after resetting the phone requires you to enter a password from the previous Google account (so-called "Speeding" account). FRP-We'll have to get around it separately. 7A This can be done through Mi Account (mode 3) or special utilities like Mi. FRP Tool.

3. Method 2: Reset via Mi Account (if the phone is tied)

If a Mi Account is activated on Redmi 7A, you can reset your password remotely via Find Device, which saves some data (such as contacts and notes synced to the cloud), but still deletes local files.

How it works:

1. Go to i.mi.com and log in to your Mi Account.
2. In the menu, select Find Device (or Find Device).
3. The map will show your Redmi 7A (if it is connected to the Internet).
4. Click on the device and select the Erase Device option.
5. Confirm the action by entering the password from Mi Account.
6. Wait for the reset to be completed (the phone will reboot automatically).

The advantage of this method is that you don't need physical access to the phone, but it only works if you:

• 🌐 The phone is connected to mobile internet or Wi-Fi.
• 🔄 Find Device has been activated in the settings.
• 🔒 Mi Account was not deleted from the device.

⚠️ Note: After the remote reset of Redmi 7A You may need to re-enter your Mi Account when you first set up your account password, restore it in advance via account.xiaomi.com!

Method 3: Reset via Fastboot (for power users)

If the first two methods fail (for example, because of a blocked Recovery or no linked account), then you can reset via Fastboot mode, USB-It's a cable and basic command line knowledge, but it's guaranteed to work even on phones with damaged firmware.

What you need:

• 🖥️ Windows computer (or Linux/macOS fixed ADB/Fastboot).
• 🔌 Original. USB-cable (don’t use cheap analogues – they may not transmit data!).
• 📦 Archive with utility ADB Fastboot (you can download from the official Android website).
• 🔋 Charged Redmi 7A (minimum%).

Step-by-step:

1. Unpack the archive from the platform-tools to the root of the C:\ disk (e.g., C:\platform-tools\).
2. Turn off the phone and put it in Fastboot mode: Press Volume down (-) + Power before the screensaver with a rabbit in a hat-eared.
3. Connect your phone to your computer with a cable.
4. Open the command line (Win + R → enter cmd → Enter).
5. Go to the folder with utilities: cd C:\platform-tools\
6. Check the connection of the device command: fastboot devices If the phone is recognized (its serial number will appear), continue. If not, install the drivers.
7. Run the reset command: fastboot erase userdata fastboot erase cache fastboot reboot

After the reboot, the Redmi 7A will be completely reset, but if the bootloader is locked on the device, it may need to be officially unlocked through the Mi Unlock Tool. This is a long process (up to 30 days of waiting), but it is necessary for further work with the phone.

💡

If the phone is stuck on the Mi logo after reset via Fastboot, try flashing it again through the Mi Flash Tool with the choice of the clean all option. This will delete all data, but restore the system to work.

5.What to do after resetting: first setup and data recovery

After a successful reset, the Redmi 7A will turn on in initial setup mode, just like after purchase, and it is important to follow a few steps correctly to avoid new locks:

1. Skip Google account binding (if required) If the phone requests data from a previous account (FRP-Use the Mi Account bypass (Section 3) or special utilities like Mi FRP Bypass Tool.

2.Restore data from backups. If you synced Redmi 7A with Mi Cloud, you can restore:

• 📞 Contacts and communications
• 📸 Photos (if autoloading was enabled)
• 📅 Calendar notes and records
• 🎮 Settings for some applications

3. Reconfigure security to avoid re-blocking:

• 🔐 Use it. PIN-code instead of a pattern lock (it is more difficult to forget).
• 📱 Activate unlocking by fingerprint (if the sensor is serviceable).
• ☁️ Enable automatic synchronization with Mi Cloud (Settings) → Mi Account → Synchronization).
• 📝 Write your password to a secure location (for example, Mi Password Manager).

⚠️ Note: If you sell or transfer Redmi 7A To another person, after reset, be sure to delete the attached Mi Account! This can be done in the account settings (Settings) → Mi Account → Otherwise, the new owner will not be able to use the phone without your data.

6. Frequent mistakes and how to avoid them

When you reset the Xiaomi Redmi 7A, users often face typical problems, and here are the most common ones and ways to solve them:

1.The phone is not included in Recovery Mode.

Reason: wrong combination of buttons or faulty buttons.

• Try to pinch the Loudness up + Power for 15-20 seconds.
• If the buttons don’t respond, connect the phone to charge and try again.
• On some versions of MIUI, you may need to first press the Volume up and then Power.

2.After reset, the phone requires an old password (FRP).

Reason: Google FRP protection activated.

• Enter the data from the last Google account.
• If you don’t remember your password, restore it through accounts.google.com.
• To bypass FRP, use Mi Account (method 3) or utilities like Mi FRP Tool (requires a computer).

3.Reset via Fastboot ended in error.

The reason is a blocked bootloader or a damaged firmware.

• Unlock the bootloader via the Mi Unlock Tool (requires a wait of 720 hours).
• If the phone doesn’t turn on, run it through the Mi Flash Tool in EDL mode (requires an authorized Xiaomi account).

💡

If Redmi 7A does not turn on after reset or freezes on the logo, the firmware is most likely damaged, in this case, only flashing through the Mi Flash Tool with the choice of clean all and lock option will help.

FAQ: Answers to Frequent Questions