Full reset Xiaomi Note 10: instructions for returning to factory settings

Smartphones series Xiaomi Note 10, including versions Pro, Lite and 5G, over time can accumulate system debris, which slows down the operating system MIUI. Users often face a situation when the device begins to work unstable, there are errors in applications or the phone just hangs on the logo. In such cases, the only true solution is a complete reset to factory settings, which returns the gadget state “out of the box”.

The memory and settings cleanup procedure requires pre-preparedness, as it permanently deletes all user data. Recovery Mode resets allow you to delete data even if the smartphone screen does not respond to touch or the system does not boot. It is important to understand the difference between a software reset via the menu and the hardware method to choose the most suitable option for your situation.

In this article, we will discuss all the available ways to restore the health of your Xiaomi, we will touch on the security of your Google account, describe the nuances of entering recovery mode and answer frequent questions that arise from owners of devices in this line.

Preparation of the device for the discharge procedure

Before you initiate the cleanup process, you need to perform a number of critical actions that will protect your data and prevent the device from being blocked. Hard Reset is a radical measure, and there will be no going back after it is completed unless you back up in advance.

First of all, make sure that the battery is at least 50-60%. Interrupting the reset process due to battery discharge can damage the system partitions and turn the phone into a “brick”, you also need to turn off the Internet or make sure you remember the password from your Google account and Mi Account.

Back up your important data. You can use Mi Cloud cloud storage or local storage to your computer via USB-Pay special attention to folders with photos, documents in downloads and correspondence in messengers that are not automatically synchronized.

💡

Before reset, perform forced contact synchronization: go to Settings → Mi Account → Sync and click Sync Now.

Reset via the settings menu (standard method)

The safest and easiest way to get the Xiaomi Note 10 back to its original state is to use the built-in functionality of the operating system, which is suitable if the screen is working correctly and you can navigate freely through the menu items.

To start, open the Settings app and scroll down to the very bottom of the About Phone section, and that's where the basic system management tools are hidden. Find Reset or Advanced Settings, depending on the version of the MIUI shell.

• 📱 Click on the “Erase All Data” button at the bottom of the screen.
• 🔒 The system will request confirmation of action and input of a pattern lock or PIN-unlock.
• ☁️ If the “Find Device” function is enabled, you will need to enter a password from your Mi Account account.
• ✅ Confirm the operation and the phone will restart to begin the cleaning process.

Once confirmed, the system will alert you that all files will be deleted, which can take anywhere from 5 to 15 minutes, depending on the amount of memory you have, and don't try to speed it up or turn your phone off manually.

💡

Using a regular settings menu is the safest method, since the system will correctly close all active processes before cleaning.

Hard Reset via Recovery Mode (if the phone is not turned on)

If the smartphone is stuck on the logo, the screen does not respond to touches or the system reboots cyclically, you will need access to Recovery Recovery mode.This method allows you to reset at a lower level, bypassing the loaded operating system.

To enter this mode on the Xiaomi Note 10, you need to perform a combination of actions with the buttons. Make sure the phone is completely turned off. If it freezes, press the power button for 10-15 seconds until the full vibration and turn off the screen.

Press both the Volume Up and the Power button at the same time, hold them until the Mi logo appears, and then the power button can be released while still holding the volume, and in a few seconds the Recovery menu will appear, where the volume buttons are controlled and the power button selected.

⚠️ Attention: In the Recovery menu, the touch screen may not work. Use volume buttons to move up and down, and a short press of the power button confirms the choice.

In the menu that opens, select a language (usually English or Chinese), then search for Wipe Data. Then select Wipe All Data and confirm the action by selecting Confirm.

Removal of a forgotten password or pattern lock

One of the common reasons for resorting to reset procedures is a forgotten screen lock password. Unfortunately, modern versions of Android and the MIUI shell do not allow you to simply bypass protection without losing data for security reasons.

The only working way to get back access to the device is to completely reset the data via Recovery Mode, described in the previous section 2. After this procedure, the phone will become as new, but all photos, contacts and applications will be deleted.

It's important to remember FRP (Factory Reset Protection) protection, because if you've had a Google account attached to your phone, when you reset, the device will require you to enter the username and password from that account when you first set it up, which is anti-theft protection, and it's officially impossible to get around it.

If you don’t remember your Google account details, restoring access to your phone can be a serious problem, requiring you to contact the service center with a purchase check to prove ownership.

Use of the Mi Cloud cloud service

An alternative way to reset the Xiaomi Note 10 is to use remote control via the Mi Cloud service, which is handy if the phone is lost but connected to the internet, or if you want to remotely clear the data.

Visit i.mi.com from any computer or smartphone, log in to the same Mi Account that was used on a locked or troubled device.

• 🌐 Go to the "Find Device" section).
• 📱 Select from the list your Xiaomi Note 10.
• 🗑️ Click on the “Clean the Device” button (Wipe Data).

The command will be sent to the phone. Once the device is online, it will automatically reset to factory settings. This method also helps remove the forgotten lock password.

Possible problems and solutions

Despite the simplicity of the procedure, users may encounter unforeseen difficulties, such as the phone being stuck in the booting phase of the Android logo after being reset, a phenomenon called “bootloop.”

In most cases, re-entering Recovery mode and doing the cleanup again helps, sometimes you need to do a double reset: first cleans the data, second formats the cache and system partitions more deeply.

⚠️ Note: If after resetting the phone requires a password from the previous owner or account that you do not know, this means that the device was reset without first logging out of the account.

It is also possible that the phone does not see the Wi-Fi network after a reset, a rare software failure that is solved by updating the firmware to the current version through the About Phone menu immediately after the initial setup.

Frequently Asked Questions (FAQ)