Xiaomi’s Redmi series is famous for its reliability and optimization, but over time, even the fastest phone can start to run slower. Full reset (Hard Reset) is a radical, but often the only effective way to return the device to factory speed and fix software errors that have accumulated over months of use. owners of the Redmi 8T often resort to this procedure before selling the gadget or after a failed system update.
The factory-return process removes all user information, so it needs to be approached responsibly. If your Redmi 8T freezes, spontaneously reboots, or apps crash immediately after launch, a clean system installation can be a lifesaver. In this article, we will detail all available methods, nuances of deleting accounts and actions in the case of a forgotten password.
Before any manipulations are initiated, it is critical to save all the important data. Once the reset operation is confirmed, it will be impossible to recover deleted photos, contacts and messages without a pre-built backup. We will consider both the standard method through the menu and the option through Recovery if the system does not boot.
Xiaomi Redmi 8T Preparation for Full Reset
The first step before starting the procedure is to create a high-quality backup. In the shell MIUI, on which Redmi 8T is based, a powerful backup tool is built in, allowing you to save not only contacts and SMS, but also call history, system settings and application data. It is recommended to connect the device to the Wi-Fi network and start synchronization with the cloud service Mi Cloud or Google account.
It is also worth checking the battery level. To successfully complete the process, the charge must be at least 50-60%, since during the formatting of memory partitions, the energy consumption can be unstable. If the phone runs out at a critical moment, this can damage the system files and inability to continue loading.
⚠️ Warning: Make sure you remember the password from your Google and Mi Account. After the reset, the system will require you to enter data to confirm ownership of the device (protection) FRP), Without this data, it will be impossible to enter the phone.
Remember to remove the microSD card if it's installed in the slot. MIUI usually ask for confirmation on formatting external drives, physical extraction SIM-Cards and memory cards are the most reliable way to avoid accidental loss of data from them.
☑️ Checklist before reset
Method 1: Reset via the settings menu (standard method)
The easiest and most secure option for users whose Redmi 8T is stable and has access to the desktop, this method allows the system to correctly complete all background processes before starting cleaning, you need to go to the main menu and find the Settings icon, which usually looks like a gear.
In the settings list that opens, scroll down to About Phone, and that's where the basic system management tools are hidden. At the bottom of the screen, you'll see Reset or Delete all data. The system will alert you that all files will be destroyed and ask you to enter a pattern lock or a digital unlock code.
- 📱 Click on the "Resetting" item in the "About Phone" section».
- 🗑️ Select the option “Erase everything).
- 🔒 Enter the screen unlock password to confirm identity.
- ⏳ Wait for the automatic reboot and start the cleaning process.
Once confirmed, the system can request a password from the Mi Account to disable the Find Device feature, which is standard security procedure. If you plan to sell the phone, this step is mandatory so that the new owner does not encounter an activation lock.
💡
If you’re not planning to sell the phone, but are just updating the system, you can try the Reset option (without deleting files), but it’s better to use full data deletion for a complete cleanup.
Method 2: Hard Reset with Recovery Mode (if the phone is not turned on)
If the Redmi 8T is stuck on the logo, goes into a cyclic reboot (bootloop) or the touch screen does not respond to touch, you will have to use Recovery mode. This method works at the bootloader level and does not require access to the operating system.
Press both the Volume Up and Power button at the same time, hold them until the Mi logo appears, then release the power button, but keep the volume down until the Recovery menu appears, and the volume buttons navigate and the power button selects.
| Action. | Control button | The result |
|---|---|---|
| Moving on the menu | Volume Up/Down | Selection of the right item |
| Confirmation of choice | Power (Power) | Launch of the team |
| Clearing the data | Wipe Data | Going to the reset menu |
| Formatting | Wipe All Data | Deletion of all information |
From the Recovery menu, select Wipe Data, then confirm the action by selecting Wipe All Data. The system will warn you again about the consequences. After the process is completed, which can take several minutes, select Reboot to restart in normal mode.
What happens if Recovery does not open?
Deleting Google Account and Protecting FRP
One of the most important security measures in Android is FRP (Factory Reset Protection), which links the device to the last Google account you entered, and if you reset your settings without deleting your account first through the menu, the phone will require you to enter a password from that address when you first set up.
To delete your account correctly before selling or transferring your device, go to Settings → Accounts and Sync (or just Accounts). Find your Google account in the list, click on it and select Delete Account. Repeat the procedure for Mi Account if it is used.
⚠️ Note: Buying a phone with protection enabled FRP without knowing the previous owner's password, it turns the device into a useless brick. Always check for deleting accounts before resetting if you transfer the phone to another person.
In some cases, even after deleting your account from settings, the system can “remember” it, so the best way is to reset through the settings menu, where the system itself will prompt you to confirm the removal of the link, or make sure that the Internet is disabled before starting a reset via Recovery, although this does not always guarantee the circumvention of the check.
Problem Solving: What to do if the reset didn't help?
There are situations where even a complete reset does not solve the problem with the Redmi 8T. If the phone continues to behave incorrectly, it may be more rooted in damage to the system partition or hardware malfunction.
If the problem occurs after installing custom firmware or obtaining superuser (Root) rights, a standard reset may not clear the modified partitions, in which case you will need to flash the device through the computer using the Mi Flash Tool utility and official stock firmware.
- 🔄 Try resetting twice in a row (after the first reset, do not set up the phone, and immediately do the second one).
- 💻 Use the Mi computer program PC Suite for diagnostics.
- 🏥 Contact an authorized service center to check the “iron».
Sometimes the cause of failures is malfunctioning applications that are restored from the backup immediately after the reset. Try to set the phone as new without restoring applications from the backup, and install them manually, monitoring the stability of the work.
Redmi 8T Primary Setup After Reset
After successfully completing the procedure and restarting, you will see a welcome screen with the Mi logo. Select the interface language and connect to the Wi-Fi network. At this stage, the system may suggest updating - this is desirable to do for installing the latest security patches.
Then you sign in to your Google account, enter the account you used to reset (or new if you deleted the old one correctly), and the system will prompt you to recover the data from the cloud, and be careful: if you restore the full copy, you can also return the same error that led to the reset.
You should select selectively restore only contacts and photos, and install the apps again. This will take longer, but will ensure the system is clean.
💡
Clean installation of apps manually after reset is the best way to ensure a stable smartphone performance in the long run.