Reset Xiaomi Redmi 6A to factory settings: the full guide

Resetting the Xiaomi Redmi 6A to factory settings is a procedure that helps solve most software problems, from slowdowns and errors to the inability to unlock the screen. However, not all users know that there are three official ways to perform a reset, as well as several nuances that can turn a routine operation into a real headache.

This article will take a look at every method, from the simplest (through the settings menu) to the emergency (using Fastboot mode), and how to bypass password requests after reset if you forget your Mi Account, and what to do if the Redmi 6A doesn’t turn on or hangs on the logo. All instructions are tested on current versions of MIUI firmware and adapted to the features of the budget model 2018.

⚠️ Important: Reset removes all data from internal memory, including photos, contacts and installed applications. If the phone is still working, make sure to back up through Settings. → Additionally. → Backup and reset.

1.Resetting preparation: what to do in advance

Before you drop the Xiaomi Redmi 6A, take a few critical steps. Even if the device is unstable, take time to prepare, saving you nerves and data.

First, check the battery. Make sure it's at least 50 percent charge. If the phone runs out during a Recovery reset, it can damage the system files and build up the device.

Second, remove the memory card (if installed) The reset does not affect external drives, but in rare cases the microSD file system may be damaged. Also make sure that the card is not important data - sometimes users confuse internal memory with external memory.

• 🔋 Battery charge: minimum 50% (optimally — 70-80%).
• 📁 Backup: Keep your contacts in check, SMS Photos on Google Drive or Computer.
• 📱 Untie accounts: Delete Mi Account, Google, and social media if you plan to sell your phone.
• 🔌 Prepare the cable: the original USB-Type-C for PC connection (you will need for Fastboot).

If you drop your phone before selling, remember to log out of all accounts, otherwise the new owner may face a Mi Account lock that will have to be removed through Xiaomi support.

2. Method 1: Reset via the settings menu (the easiest)

This is the main method that is suitable if Redmi 6A is turned on and you remember the unlock password.The procedure takes no more than 5 minutes and requires no additional tools.

Instructions:

1. Open Settings (the gear icon on the main screen).
2. Go to the About Phone section (the last item on the menu).
3. Slip on Reset (may be called Reset and Reset in older versions of MIUI).
4. Select Reset all settings (not to be confused with Network Reset!).
5. Confirm the action by entering PIN-code.
6. Wait for the reboot (it will take 3-7 minutes).

Once the phone is rebooted, it will prompt you to set it up as new. If you previously linked your Mi Account, the system can request account details to verify ownership.

⚠️ Warning: If after resetting the phone requires a Mi Account data entry that you don't remember, don't try to guess the password. After 5 unsuccessful attempts, the device will be locked for 24 hours.

3. Method 2: Reset via Recovery Mode (if the phone is not turned on)

If the Redmi 6A is stuck on the logo, does not respond to touches or does not load beyond the welcome screen, use Recovery Mode, which works even when system files are damaged, but requires accurate follow-up.

How to log in to Recovery:

1. Turn off the phone (press the power button for 10 seconds if it freezes).
2. Press the power button and the volume button at the same time.
3. Hold them for 10-15 seconds until the Mi logo and menu appear.

In the Recovery menu, the volume buttons (up/down for navigation, power for selection) are controlled.

1. Select Wipe Data (which can be called Wipe & Reset).
2. Confirm the action by selecting Wipe All Data.
3. Once completed, select Reboot to reboot.

It can take up to 10 minutes to process, and if the phone freezes again after the restart, repeat the procedure or try the third method (via Fastboot).

Method 3: Reset via Fastboot (for power users)

This method requires a computer and minimal command line knowledge, and it's useful if you:

• 🔄 The phone is not included in Recovery or the settings menu.
• 🔐 Mi Account password is forgotten and the device is locked.
• 🛠️ You need to reflash your phone after a failed update.

The work will require:

• Official Xiaomi drivers for PC.
• Minimal ADB and Fastboot.
• Original USB-Type-C cable (faulty cables may interrupt the connection)

Step-by-step:

1. Install the drivers and ADB on your computer.
2. Turn off Redmi 6A and press the power + volume button to enter the Fastboot Mode (the image of a hare in a hat-eared will appear).
3. Connect your phone to your PC and open the command line in the folder with ADB.
4. Enter the command to check the connection: fastboot devices If the device is determined (the serial number will appear), continue. If not, check the drivers or cable.
5. Run reset: fastboot erase userdata fastboot erase cache fastboot reboot

Once the phone is rebooted, it will be completely cleaned. If you need a full flashing, download the official ROM for Redmi 6A (codename cactus) from Xiaomi's website and run it with the command:

fastboot flash all [name file firmware.zip]

1. reconnect the cable to another USB-port (better to use) USB 2.0 on the back of the PC).

2. disable the antivirus (it can block ADB).

3. In Windows Device Manager, update the driver for Android Bootloader Interface manually, specifying the folder with ADB.-->

5 What to do if the phone requires a Mi Account password after resetting

One of the most common problems after a Xiaomi Redmi 6A reset is requesting data from Mi Account, even if you don't remember the linked account, which is the theft protection Xiaomi implemented in MIUI, and there are only two ways to get around it legally:

• 📧 Restore your account. Go to Mi Account, click Forgot your password? and follow the instructions. You will need to access your email or phone number associated with your account.
• 📄 Contact Xiaomi if you don’t remember your account details but can confirm your purchase (by check, box or check) IMEI), Support will remove the blockage during 3-7 Form of circulation.

⚠️ Please note: do not use third-party services that offer "Mi Account bypass in 5 minutes:

• Violate the terms of use of Xiaomi, which leads to the loss of warranty.

If the phone is hand-buyed and the previous owner has not untied the account, contact him. Without his help, it is impossible to unlock the device (except through official support with proof of purchase).

6. Frequent errors and their solutions

Even when following instructions, users face problems, and let's look at typical scenarios and how to fix them.

If none of the methods worked, most likely, the problem lies in the hardware (for example, damaged memory eMMC). In this case, contact the service center. The average cost of diagnosis for Redmi 6A is 500-1000 rubles.

💡

If the phone doesn't respond to any of the reset methods, don't try to disassemble it yourself.The Redmi 6A has a soldered battery and a fragile screen plume - unqualified repairs can cause the device to fail completely.

7. Alternative methods: when the discharge does not help

If factory resets haven’t solved the problem (for example, the phone is still braking or not turning on), consider the following options:

• 🔄 Flashing through Mi Flash Tool. Download the official ROM for Redmi 6A (codename cactus, and run it in Fastboot mode, which will bring the phone back to "clean" status.
• 🛠️ Replace the battery if the phone turns off when 30-40% The problem is the battery, or the charge doesn't hold the charge. 800 ruble.
• 🔧 Diagnostics of the motherboard: In case of severe lags, spontaneous reboots or no charging, the memory chip or processor can be damaged.

For flashing through the Mi Flash Tool:

1. Download the firmware (select the Fastboot version for cactus).
2. Unpack the archive in a folder without Cyrillic characters.
3. Connect your phone in Fastboot mode to your PC.
4. In the Mi Flash Tool, specify the path to the firmware folder and click Refresh → Flash.

It takes 5-10 minutes, and when it's done, it'll reboot in the factory state.

FAQ: Answers to Frequent Questions