Reset Xiaomi Redmi Go to factory settings: a complete guide with photos and tips

Xiaomi Redmi Go

Android Go Edition

In this article, you will find step-by-step instructions for two reset methods: through Settings and with Recovery Mode. We will also discuss what to do if the phone does not respond to commands, how to prepare for the procedure and what errors users most often make, and at the end, answers to the most common questions that arise after the reset.

If your Redmi Go is slow, overheats frequently, or gives you bugs when installing apps, a reset can help, but remember, it’s not a panacea for hardware problems (like a worn-out battery or a damaged motherboard), and you’d better go to a service center.

Before you get started, check if there are any memory problems.Redmi Go has just 8 or 16GB of internal storage, and if it's clogged with cache and junk files, a reset may not be necessary - just clear the storage manually.

1.Resetting preparation: what to do necessarily

Resetting to factory settings removes all the data from the phone's internal memory: photos, contacts, messages, installed apps and even accounts, so preparation is the most important step.

First, back up. Redmi Go doesn't have a built-in backup feature through Mi Cloud (due to Android Go restrictions), so use third-party services:

• 📱 Contacts and calls: sync with Google Account (Settings) → Accounts. → Google → Synchronization).
• 📷 Photos and videos: upload photos to Google or copy them to your computer via Google USB-cable.
• 💬 Messages: Use applications like SMS Backup & Restore (Available on Play Market).
• 🎮 Applications and their data: some games (e.g, PUBG Mobile or Clash of Clans allow you to link progress to your account Google/Facebook.

Second, check the battery. The reset process can take up to 10 to 15 minutes, and if the phone runs out at that point, there's a high risk of damage to system files. The optimal charge level is at least 50%.

Third, make sure you know the details from the Google account that is linked to the phone.After the reset, Redmi Go will require you to enter the login and password from the last account you use (FRP-Without this data, it will be difficult to unlock the phone.

Make backup contacts and photos|Charge your phone at least 50 times%|Remember data from a Google account|Delete SD-card (if any)|Disable two-factor authentication in accounts-->

2. Method 1: Reset via the Settings menu (the easiest way)

If the phone turns on and responds to touch, use this method. It's the safest and doesn't require any additional skills.

Instructions:

1. Open Settings (the gear icon on the main screen).
2. Scroll down and select System.
3. Press Reset (or Reset settings, depending on the firmware version).
4. Select Delete all data (reset to factory settings).
5. Enter a pattern lock or PIN-code, if requested.
6. Confirm the action by clicking Reset the phone.

The phone will restart and start the cleaning process, and the Xiaomi logo and boot animation will appear on the screen, and don't interrupt the process, which can cause the system to crash.

Once the reset is complete, the phone will turn on in its initial setup mode, as after the purchase, all you have to do is go through the standard procedure: select a language, connect to Wi-Fi, and log in to Google Account.

💡

If the phone asks you to enter your old password after reset, but you don’t remember it, try to restore access through the Google Restore page.

3. Method 2: Recovery Mode reset (if the phone is not turned on)

If Redmi Go doesn't respond to clicks, is stuck on the logo or is locked with a pattern lock, then hardware reset via Recovery Mode will help, which is more difficult, but works even in severe crashes.

Steps to Enter Recovery:

1. Turn off the phone (press the power button for 10-15 seconds if it freezes).
2. Press the Power button + Volume Up button at the same time.
3. Hold both buttons until the Mi logo and Recovery menu appear.

In the Recovery menu, the volume buttons (Up/Down for moving, Power for selecting) are controlled.

1. Select Wipe Data (or Wipe & Reset)
2. Confirm the action by selecting Wipe All Data.
3. Wait until the process is complete (the screen will display the inscription Data wipe complete).
4. Choose Reboot. → Reboot to System.

The phone will reboot and start setting up from scratch, and if it requires a pattern lock again after reset, it means that the procedure was incorrect (maybe you chose the wrong menu item), repeat the steps or contact the service.

4. Possible mistakes and how to avoid them

Resetting to factory settings seems like a simple procedure, but users often face problems.

Error 1: The phone will not turn on after resetting

Reasons:

• 🔋 The battery was drained during the process.
• 🛠️ Firmware is damaged (for example, if you interrupt reset via Recovery).
• 🔌 Failure of the hardware (for example, the dump of the battery plume).

Solution: connect your phone to charge for 1-2 hours, then try to log in to Recovery again and reset again. If it doesn't work, contact the service.

Error 2: Asks for an old password (FRP-block)

This is Google's standard security, which appears if the phone was tied to an account.

1. Connect to Wi-Fi.
2. Enter the email and password from the last Google Account you use.
3. If you do not remember the data, restore access through the recovery page.

Mistake 3: Resetting does not remove viruses or root rights

If you installed root rights (via Magisk or SuperSU), a standard reset will not remove them. To completely clean up, you will need to reflash your phone via Fastboot. The same applies to some viruses that are embedded in system files.

💡

If after reset the problems remained (brake, overheating, flying applications) - the reason is most likely in the hardware: a worn-out battery, damaged memory or overheating of the processor.

5.What to do after resetting: setup and optimization

After a successful reset, the phone will look like new, but to keep it running fast and stable, follow a few steps:

Step 1: Update the firmware

Go to Settings → System → System Update and check for updates. Redmi Go received updates to Android 10 Go Edition, but some regions may have stayed on older versions.

Step 2: Recover data from the backup

• 📱 Contacts and calendar sync automatically if you are logged in to a Google Account.
• 📷 Photos and videos can be downloaded back from Google Photos or copied from a computer.
• 🎮 To restore progress in games, log in to the same accounts (Google Play, Facebook) as before the reset.

Step 3: Optimize your phone

So Redmi Go doesn't brake again:

• 🚫 Remove unnecessary apps (especially those that work in the background).
• 🔄 Clean the cache once a month through Settings → Warehouse → Clear the cache.
• 🔋 Turn off auto-update apps in the Play Market (saves memory and traffic).
• 📶 Use Battery Saving Mode (Settings) → Battery → Savings regime).

Step 4: Install the antivirus

Budget phones are more likely to be targeted by viruses, and we recommend free antiviruses:

• Avast Mobile Security
• Bitdefender Antivirus
• Malwarebytes

6. Alternative methods of “rejuvenating” the phone without resetting

If you don’t want to lose data or are afraid that resetting won’t help, try less radical methods:

Method 1: Hand-cleaning memory

Go to Settings → Storage and see what takes up the most space.

• 🎵 Music and podcasts (remove unnecessary tracks).
• 🎬 Uploaded videos (especially from messengers).
• 🗑️ Application cache (clean through Settings) → Annexes → [Select an application] → Warehouse → Clear the cache).

Method 2: Recoil to factory firmware via Fastboot

If the phone is getting a bad update, you can manually reflash it.

• 🖥️ Computer with drivers installed ADB/Fastboot.
• 📥 Official firmware for Redmi Go (you can download on the official Xiaomi website).
• 🔧 The Mi Flash Tool.

This method is more complex and requires skill, but it is guaranteed to return the phone to a "clean" state.

💡

Before you run your Fastboot, check the phone model in Settings → About Phone → Model. The firmware for Redmi Go (tiare) won’t work for other Xiaomi models!

Method 3: Using Applications to Optimize

Apps like CCleaner or SD Maid help clean up junk files and speed up the system, but don’t overuse cleaners, some of which consume resources and display false warnings.

⚠️ Note: If you have installed custom firmware (for example, LineageOS), resetting via Recovery can lead to a knock (inoperability) of the phone.

7. Frequent Post-Dump Questions (FAQ)

⚠️ Note: If you sell or give a phone, it is not enough to simply reset your settings. Be sure to complete a reset (Delete all data) and untie all accounts (Google, Mi Account) so that the new owner does not gain access to your data.