Reset Xiaomi Redmi 5 Plus to factory settings: a detailed guide with photos

Xiaomi Redmi 5 Plus is a popular smartphone released in 2017, but still in use today due to its reliability and performance. However, over time, even this device can start to slow down, emit errors or require a complete reinstallation of the system. Hard reset is a universal solution for most software problems, but it is important to conduct it correctly so as not to lose important data or block the device.

In this article, you will find three proven ways to reset: through the MIUI settings, with Recovery Mode and the fastboot team for advanced users. We will also discuss how to prepare your phone for reset, what to do if the Redmi 5 Plus does not turn on, and how to recover data after the procedure. Particular attention is paid to the nuances of working with Mi Account - without knowing the username and password, you risk getting a "brick" instead of a working smartphone.

Preparation for resetting: what to do before the start

Resetting to factory settings deletes all user data, including:

• 📸 Photos and videos in the gallery (except for those in the gallery) SD-map)
• 📱 Contacts, SMS Call log (if not synced with Google)
• 🎵 Music, downloads and documents in internal memory
• 🔧 Application settings, Wi-Fi passwords, social media accounts

Before you start, follow the mandatory steps:

Make a backup copy through Settings → Additionally. → Backup|Synchronize contacts with Google Account|Copy photos/videos to your computer or cloud|Remember the username/password from Mi Account (required!)|Charge your phone at least 50 times%-->

Critically, if you forget the data from the Mi Account tied to your phone, the reset will lock the device through the Find Device function. It will be extremely difficult to restore access without the original password - you will need to contact Xiaomi with proof of ownership.

⚠️ Note: Redmi 5 Plus with firmware MIUI 12+ After the discharge, it may be necessary to enter the old PIN-code SIM-Write this code down in advance or extract it. SIM before the procedure.

Method 1: Reset via MIUI settings (the easiest)

This method is suitable if the phone turns on and responds to touch. The interface may vary slightly depending on the version of MIUI (9-14), but the general logic is maintained:

1. Open the settings (cog on the desktop).
2. Go to About Phone → System Update (check the relevance of the firmware).
3. Go back and select Additional → Recovery and Reset.
4. Tap Reset settings, then Delete all data.
5. Enter. PIN-code or pattern lock (if installed).
6. Confirm the action with the Reset button.

The phone will reboot and start the cleaning process, which will take 3-7 minutes, and when you complete it, you will see the screen of the initial setup, as after you purchase it.

💡

If the menu does not have the item "Recover and Reset", try the path: Settings → System → Advanced Settings → Resetting.

Method 2: Hard Reset with Recovery Mode (if the phone is not turned on)

If Redmi 5 Plus is stuck on the logo, reboots cyclically or does not respond to the screen, resetting through Restore mode will help.

1. Turn off the phone (press the power + Volume increase for 10 seconds).
2. Hold Power + Volume Up until the Mi logo appears.
3. Release the buttons and you will be taken to Recovery Mode (English menu).
4. Select Wipe Data with volume buttons, confirm Wipe All Data.
5. After cleaning, select Reboot → Reboot to System.

If the Recovery menu is in Chinese, focus on the location of the items:

• 📛 The first item is Reboot (reboot)
• 🧹 The second item is Wipe Data (reset)
• 🔧 Third item - Connect with MIAssistant (for PC)

⚠️ Warning: On Redmi 5 Plus with an unlocked bootloader, a reset via Recovery can result in a loss of TWRP (In this case, after the procedure, you will need to re-install TWRP fastboot.

Method 3: Fastboot Reset (for power users)

This method is used if:

• 🔄 The phone doesn’t even load in Recovery.
• 🔓 You need to bypass the lock Mi Account (legally only for your device!).
• 🛠️ Refresh your phone after a failed update.

You'll need:

• 💻 Computer with installed Xiaomi drivers and Mi Flash Tool.
• 🔌 Cable USB Type-C (original or high quality).
• 📦 Fastboot firmware ROM Redmi 5 Plus (download from official website).

Step-by-step:

1. Unpack the archive with firmware in a folder without Cyrillic characters (for example, C:\Redmi5Plus_Fastboot).
2. Turn off your phone and press Power + Volume down until the Fastboot logo appears.
3. Connect your phone to your PC. Android Bootloader Interface should appear in Device Manager.
4. Open the Mi Flash Tool, press Select and point the path to the firmware folder.
5. At the bottom, select clean all and click Flash.
6. Wait for the process to finish (5-10 minutes) and the phone will reboot automatically.

💡

Use Fastboot only as a last resort. Mistakes can result in the loss of IMEI or the phone being converted to a brick.

To unlock the bootloader before the firmware:

fastboot oem unlock


fastboot flash unlock unlock.bin

But remember: official unlocking requires a Mi Account binding and 72-720 hours of waiting (depending on Xiaomi’s policy).

Yeah, I did.|Yes, but with the help of a master.|No, I'm afraid to break it.|I didn't know it was possible.-->

What to do after resetting: setup and recovery of data

After a successful reset, Redmi 5 Plus will offer to go through the initial setup.

1. Connect to Wi-Fi at the network selection stage – this will speed up the download of updates.
2. Sign in to Mi Account if your phone was tied, and without that, some features (like Mi Cloud) won’t work.
3. Recover the data: 📱 Contact: Settings → Google accounts → Synchronization. 📸 Photo: Google Photos or Mi Cloud (if backed up). 🎮 Apps: Play Market → Library → Established.

Update the firmware

Settings → About the phone → System update

If the phone is running slower than before:

• 🧹 Clear the cache in Settings → Warehouse → Clear the cache.
• 🔄 Turn off animation: in Settings → About the phone tap 5 times on the version MIUI, Then in the Advanced Settings. → For developers, install Windows animation = 0.5x.
• 🔋 Check the battery health in ##4636## (Menu Battery Information).

Common mistakes after reset and their solutions

Even after a successful reset, problems can arise, and here are the most common ways to fix them:

If the phone does not turn on after reset (black screen, no vibration), check:

• 🔋 Charging: connect to another cable/power supply for 30 minutes.
• 🔌 Port port USB-C: Try brushing it gently with a toothpick (possibly oxidizing contacts).
• 🔧 Hardware malfunction: If the phone is warming but does not show signs of life, it may be a problem with the food bill.

How to avoid data loss in the future

To avoid losing important information in the following resets, set up automatic backups:

1. MI Cloud: 📱 Go to Settings. → Xiaomi account → Mi Cloud. 🔄 Enable backup for Contacts, Notes, SMS and galleries. ☁️ Buy an extra seat (from the 5 GB free up to 200 GB for 99₽/month).

Tip for Redmi 5 Plus owners: If you’re experimenting with firmware often, install TWRP Recovery and backup before any changes, which will restore the phone to working condition in 5 minutes.

FAQ: Frequent questions about resetting Xiaomi Redmi 5 Plus