Your Xiaomi stopped turning on, hanging on the logo or showing a black screen? Take it to the service center. In 80% of cases, the problem can be solved by a hard reset to the factory settings - even if the phone seems completely dead. In this article, we will discuss all working reset methods for Redmi, POCO and Mi devices, including models with a locked bootloader and damaged firmware.
It is important to understand: reset via Recovery, Fastboot or EDL-If the phone has previously synced with Mi Account, after reset, you may need to enter a login / password to unlock (FRP). But if the device does not respond to the power button or charges, but does not boot – there is simply no alternative to resetting.
We tested all methods on the latest MIUI 14/15 and HyperOS (2026) firmware, and the instructions are suitable for smartphones from Xiaomi Mi 5 (2016) to Xiaomi 14 Ultra flagships. If your model is older, check for EDL support in specifications.
1.Resetting Preparation: What to Do Before You Start
Before you start resetting, follow these steps – they will save time and prevent additional problems:
- 🔋 Charge the phone to at least 30%. If the battery is discharged below 10%, the device may shut down during the process, which will lead to permanent damage to the firmware (you will need to flash through the firmware). EDL).
- 🔌 Use the original cable. Cheap. USB-cables often don’t transmit data to Fastboot, which is why the PC can’t see the phone.
- 💻 Install drivers. Download Mi for Windows USB Driver (official Xiaomi website) macOS/Linux No need for drivers.
- 📱 Check the response to charging. If the indicator does not burn when connecting to the network, the problem may be in the hardware (for example, the battery plume has departed).
If the phone responds to charging (vibrates, lights up), but does not turn on - go to method 2 or 3. If there is no reaction even to charging, first check:
⚠️ Warning: If the phone doesn't show any signs of life after falling or getting moisture, software resetting won't help. This is a sign of hardware damage (contact dumping, short circuit.
Updates MIUI|Falls/blows|Battery discharge to zero|Custom firmware installations|The other.-->
2. Reset via Recovery Mode (if the phone vibrates or the logo burns)
If the smartphone responds to the power button (vibrates, flashes the screen, but does not load fully), try entering the Recovery.This method works on all Xiaomi models, including the Redmi Note 12, POCO X5 and Mi 11.
Instructions:
- Turn off the phone (if it is stuck on the logo, hold the power button for 10-15 seconds).
- Hold the combination: 🔘 Power button + Loudness up (for most models). 🔘 Power button + Loudness down (for old Mis) 5/6).
Recovery
MIUI
Fastboot
Wipe Data
Wipe All Data
Reboot
Reboot to System
If the Recovery menu does not appear, and the phone immediately goes to Fastboot (a cartoon labeled Fastboot) - use method 3.
Charge your phone ≥30% | Download Mi USB Driver| Prepare the original cable | Check the button combination for your model-->
3. Fastboot reset (if the phone is determined by PC)
If the smartphone is detected by the computer in Fastboot mode (when connected via USB, it gives a device recognition sound), but does not boot, use a reset command via fastboot. This method is suitable for devices with an unlocked bootloader.
Step-by-step:
- Install Platform Tools (the official tool from Google).
- Connect your phone to your PC in Fastboot mode (press Power + Volume Down for 10 seconds).
- Open the command prompt (cmd) in the fastboot folder and type: fastboot devices If the device is determined (the serial number appears) - continue. If not, check the drivers or cable.
- Run reset: fastboot erase userdata fastboot erase cache fastboot reboot
Instructions:
- Unpack the firmware (.tgz or.zip) in a folder without Cyrillic characters.
- Install the Mi Flash Tool and the Qualcomm HS-USB QDLoader 9008 driver (included in the Mi USB Driver package).
- Turn off the phone. Press Volume up + Volume down and connect to the PC. Hold the buttons for 20 to 30 seconds until the Qualcomm HS-USB QDLoader 9008 appears in Device Manager.
- In the Mi Flash Tool, select the firmware folder, press Refresh (the device must be determined) and click Flash.
- Wait until it's over (10-15 minutes) and the phone will automatically reboot.
What if the PC doesn’t see the phone in EDL?
If the phone still does not turn on after firmware, check:
- 🔋 Battery status (possibly needing replacement).
- 🔌 Charging port contacts (clean dust with alcohol).
- 🛠️ Integrity of plumes (if the phone fell).
5. Alternative methods: Test Point and service centers
If neither method works, there are two options:
- Activation of Test Point (for forced transfer to the EDL). On the phone board there are special contacts, the closure of which includes EDL-It's even on completely dead devices.
- Official Xiaomi centers charge for unlocking EDL from 1,500 to 3,000 rubles (depending on the model). Informal workshops can make cheaper, but the risk of running into fraudsters is higher.
Cost of repair in the service:
| Type of problem | Cost (₽) | Date(s) |
|---|---|---|
| Reset via EDL (no disassembly) | 1 500–2 500 | 1 |
| Battery replacement + reset | 2 500–4 000 | 1–2 |
| Repair after falling (plates, display) | 3 000–8 000 | 2–5 |
| Reflashing with unlocking bootloader | 2 000–3 500 | 1–3 |
💡
If you decide to bring the phone to the service, pre-check it with IMEI for originality. Some workshops refuse to work with devices tied to another region (for example, the Chinese version of Xiaomi for the Russian market).
6.How to avoid problems after resetting
After a successful reset, the phone will turn on, but may require additional actions:
- 🔐 Unlocking FRP. If you previously had Mi Account attached, after resetting, the phone will request a login / password.
- 📱 Customize from scratch. After reset, all data is deleted, including photos and contacts. If Mi Cloud was enabled, restore the backup.
- 🔄 Check for updates. Go to Settings. → The phone. → Update the system and install the latest version MIUI/HyperOS.
- 🛡️ Disable unnecessary services. To avoid repeated freezes, disable: Settings → Battery → Optimizing the battery → Disable for critical applications
If the phone brakes or turns off again after reset, the reason may be:
- 🔋 Worn-out battery (check in Settings) → Battery → Status).
- 🛠️ Overheating of the processor (install) AIDA64 diagnostic).
- 📱 Damaged memory (testing through MemTest in Recovery).
💡
If the phone after reset is unstable, do not rush to sew custom software. First test it on stock firmware - this will help to identify hardware problems.