Reset Xiaomi through Recovery Mode: detailed instructions with photos and nuances

Resetting Xiaomi’s smartphone through Recovery Mode is a radical but effective way to get the device back on track, a method that comes in handy if the phone is stuck on the MIUI logo, unresponsive to touch, locked after a failed update, or infected with viruses. Unlike standard resets, working with a recovery allows you to bypass system limitations and return the smartphone to a factory state even in case of serious failures.

However, the procedure has its pitfalls: wrong actions can turn the phone into a “brick”, and ignorance of the nuances will lead to the loss of important data. In this article, we will discuss all the ways to reset via the recovery on Xiaomi (including models with HyperOS), explain how to avoid errors, and give a checklist for preparation, TWRP), Because the algorithms are different.

When you need to dump through the river, and when you can do without it

Before you move on to radical measures, make sure alternative methods don't solve your problem.Reset via Recovery Mode is justified in the following cases:

• 🔄 The phone does not turn on or cyclically restarts (bootloop).
• 🔒 The device is locked after a failed firmware or rooting.
• 🦠 Viruses or malware block access to settings.
• 📱 The screen does not respond to touch, but the phone is determined by the computer.
• 🔧 You need to delete your Mi Account (if you have forgotten your password and no associated number).

In other cases, try more gentle ways:

• ⚙️ Reset via Settings: Settings → The phone. → Resetting settings (works if the phone is turned on).
• 🔄 Hard reboot: clamping down on power + Loudness down for 10-15 seconds.
• 💻 Fastboot: If you need to reflash the device without losing data (PC required).

⚠️ Warning: Resetting over the receptacles deletes all data on the phone, including photos, contacts and apps.If the phone turns on, first try saving information via Mi Cloud or PC connection.

Preparation for resetting: what to do in advance

Even if the phone doesn't turn on, the preparation will help you avoid mistakes.

Charge your phone at least 50% (better 100%)

Prepare. USB-Cable (original or certified)

Make sure there is no important data on your phone (or try to extract it)

Check the phone model (on the box or via fastboot getvar product)

Download the official firmware (if you plan to re-flash after resetting)-->

Pay special attention to battery power. If the phone runs out during reset, it can damage the system partition and completely inoperable device. If the screen does not respond, but the phone is determined by the computer, try charging it in the off state for 1-2 hours.

If you plan to stitch your phone through Fastboot after reset, download the official firmware for your model from Xiaomi Firmware in advance.

1. Choose your model in the list.
2. Download the latest stable version (Stable ROM).
3. Unclose the file into a folder on your computer.

For models with a locked bootloader, you may need to unlock through the Mi Unlock Tool. Please note that after unlocking, all data will also be deleted.

How to go to Recovery Mode on Xiaomi: a universal way

Entering recovery mode on Xiaomi depends on the model and firmware version. We will look at three main methods that work on 90% of the brand’s devices.

Method 1: Classic button combination (for switched off phone)

This is the most reliable method that works even on locked or faulty phones:

1. Turn off the phone (if it is getting stuck – press Power + Volume up for 10 seconds).
2. Press the power + volume up at the same time.
3. Hold the buttons for 5-10 seconds until the Mi logo appears.
4. Let go of the meal, but keep the volume up until you see the recaveri menu.

Some models (such as the POCO F5 or Redmi Note 12 Pro+) may need to first press the Volume up and then Power. If nothing happens, try alternative combinations.

Method 2: ADB (if the phone is turned on but the screen is not working)

If the phone turns on, but the sensor does not respond, you can enter the Recovery via the computer:

1. Connect your phone to your PC via USB (enable USB Debugging in advance if possible).
2. Open the command line (Win + R → cmd).
3. Enter the command: adb reboot recovery

If ADB does not recognize the device, install Xiaomi USB Drivers and check the connection.

Method 3: Through Fastboot (if the standard Recovery is damaged)

If the phone only loads in Fastboot Mode (the robot labeled Fastboot on the screen), use the command:

fastboot reboot recovery

If that doesn't work, maybe the recovery section is damaged, so you'll have to reflash the phone completely.

Instructions for discharge through standard Recovery (Stock Recovery)

The standard recovery on Xiaomi has limited functionality but is enough to completely reset.The interface may vary depending on the version of MIUI or HyperOS, but the overall logic is maintained.

1. Go to Recovery Mode in one of the ways described above.
2. Use the up/down Volume buttons for navigation and Power for selection.
3. Select Wipe Data (or Clear Data on new firmware).
4. Confirm the action by selecting Wipe All Data (or similar).
5. Wait until the process is completed (usually takes 1-3 minutes).
6. Select Reboot to reboot.

Some models (such as the Xiaomi 13 Ultra or Redmi K60) may require you to enter a password from your Mi Account, even after you reset it, and if you don’t remember it, you’ll have to use the Mi Flash Tool for full flashing.

💡

If after resetting the phone asks you to enter the old password from your Google account (FRP), use the official unlock tool from Xiaomi or contact the service center.

⚠️ Note: On phones with HyperOS, the reset process can take up to 10 minutes. Do not remove the battery or reboot the device forcefully, this will damage the system files.

Resetting through Custom Recavers (TWRP): Advanced Opportunities

If your Xiaomi has custom recavator (TWRP) installed, you have more options to reset, such as selectively removing application data, backing up before reset, or flashing a modified firmware.

Instructions for TWRP:

1. Go to TWRP (usually the same button combination as for a standard recavery).
2. On the main screen, select Wipe.
3. Check the check boxes across the street: 📁 Dalvik / ART Cache 🗃️ System 📱 Data 🔄 Internal Storage (optional if you want to erase everything)

Swipe to Wipe

Reboot System

Advantages of TWRP:

• 🔄 Ability to selectively delete (e.g., cache only or application-specific data).
• 💾 Creating a full backup before resetting.
• 📁 Install custom firmware (for example, LineageOS or Pixel Experience).

However, note that working with TWRP requires an unlocked bootloader and can deprive you of warranties. On new models (Xiaomi 13T, Redmi Note 13 Pro+), installing a custom recavator can block access to banking applications due to the SafetyNet trigger.

💡

Custom Recovery (TWRP) provides more features, but requires unlocking the bootloader and can disrupt some features (such as Google Pay or banking applications).

What to do after resetting: setup and recovery of data

After a successful reset, the phone will turn on in initial settings. Follow these guidelines to avoid problems:

1. Don’t connect to Wi-Fi right away – check first if you need to enter an old password from Mi Account or Google (FRP).
2. If the phone asks for old account details, use official unlock tools or contact the service.
3. When setting up, select Settings as a new device rather than recovering from a backup (if the backup was created on a problem firmware).
4. Update the firmware to the latest version through Settings → System Update.

If you have backed up the data before the reset, restore it in the following order:

1. Contacts (via Mi Cloud or Google Account)
2. Photos and videos (from a computer or cloud storage).
3. Applications (install system first, then the rest).

Avoid recovering data from backups created on custom firmware – this can cause conflicts with the new system.

💡

After reset, check the security settings: turn on the device encryption (if it was turned off) and set the unlock to the fingerprint or face again.

Common mistakes and their solutions

Even with the correct following of the instructions, problems can arise, and we have collected the most common errors and ways to fix them:

If none of the methods worked, it may be a hardware problem (for example, a malfunctioning flash memory).

FAQ: Frequent questions about dumping through the Recovery