How to Reset Xiaomi Robot Vacuum Cleaner 1C Factory settings: 3 working methods

Why you need to reset Xiaomi Mi Robot Vacuum 1C and when to do it

Xiaomi robot vacuum cleaner 1C — One of the most popular budget cleaning assistants, but even it sometimes requires a full reboot.Reset to factory settings solves 90% of software problems, from navigation errors to connectivity issues to the Mi Home app. However, an incorrect reset can aggravate the situation if you do not take into account the nuances of the model.

The main reasons for discharge are:

• 🔄 The vacuum cleaner "hangs" at one point and does not respond to commands
• 📱 Does not connect to Wi-Fi or permanently loses contact with the app
• 🔋 Battery discharges quickly (less than 20 minutes of operation)
• 🗺️ Mapping errors (does not build a map, drives in circles)
• 🔧 Preparation for sale or transfer to another owner

It is important to understand: Xiaomi 1C It has two types of reset, soft (saves some settings) and hard (complete zeroing), the first is suitable for eliminating minor glitches, the second is for cardinal problems or before sale.

Preparing for reset: what to do before zeroing settings

Before you dump Xiaomi 1C, Take the necessary steps to avoid losing important data or making problems worse:

Keep your current cleaning card (if correct)|Untie the vacuum cleaner from the Mi Home account|Check the battery charge (minimum 30%)|Prepare data to reconnect to Wi-Fi|Make sure there are no button obstacles nearby.-->

Pay special attention to detachment from the account, if the vacuum cleaner is tied to the Mi Home, after a hard reset it can be difficult to reconnect it without the original account.

1. Open the Mi Home app
2. Go to Profile. → Settings → Devices
3. Find Xiaomi. 1C in the list and click Remove the device
4. Confirm the action (a password may be required)

If the vacuum cleaner was bought from hand and tied to someone else’s account, the reset will not help it untie – you will need to contact Xiaomi with proof of purchase.

⚠️ Warning: After a hard reset, the vacuum cleaner will return to the factory firmware, which may roll back some features (such as cleaning areas) added in subsequent updates.

Method 1: Soft reset (reset) - if the vacuum cleaner is glitching, but switched on

Soft reset is the equivalent of a smartphone reboot, and it doesn't delete settings, but it resets temporary system errors.

• 🤖 The vacuum cleaner does not respond to commands from the remote or application
• 🔄 He was getting stuck during cleaning and did not move.
• 📶 He is constantly losing contact with Wi-Fi.

Instructions for soft discharge:

1. Press and hold the power button (⏻) 10 seconds on the vacuum cleaner until you hear the sound.
2. Release the button and the vacuum cleaner will turn off.
3. Wait 30 seconds, then turn it on with a short press on the same button.

If you have problems after the reboot, try resetting your Wi-Fi settings separately:

1. Hold the power buttons and go home (🏠) 5 seconds at a time.
2. The vacuum cleaner will issue a voice message in Chinese (or English) – this is a signal that the network is reset.
3. Connect to Wi-Fi again via Mi Home.

💡

If the vacuum cleaner is continuously squeaking after a soft discharge, it's a sign of sensor error. Try cleaning the brushes and sensors of dust with a dry brush.

Method 2: Hard reset (full zeroing) – if the vacuum cleaner does not work properly

Hard reset removes all settings, including:

• 📡 Link to Wi-Fi and Mi Home account
• 🗺️ Preserved maps of premises
• ⚙️ Individual settings (cleaning modes, schedule)
• 🔋 Battery statistics

For a hard reset Xiaomi 1C:

1. Turn off the vacuum cleaner (hold the power button for 3 seconds).
2. Press the power buttons simultaneously (⏻) and Spot Cleaning (🎯) 10-15 seconds.
3. Let go when you hear a long beep and a white light goes on.
4. The vacuum cleaner will automatically restart (it will take up to 2 minutes).

After discharge:

• 🔄 The vacuum cleaner will return to the factory firmware (possibly outdated).
• 📱 You will have to re-attach it to Mi Home and set up Wi-Fi.
• 🔋 The first turn on after reset can take up to 5 minutes – it’s normal.

⚠️ Warning: If the vacuum cleaner does not turn on or flashes red after a hard discharge, this may indicate a hardware malfunction (for example, battery damage.

Method 3: Reset via Mi Home app (if vacuum cleaner is connected)

If the vacuum cleaner is still responding to commands from the application, you can do a software reset, which is less radical than hard reset, but removes most of the settings.

Instructions:

1. Open Mi Home and choose your Xiaomi 1C.
2. Go to Device Settings → General → Reset settings.
3. Confirm the action (it may be necessary to enter a password from the account).
4. Wait for the process to be completed (the vacuum cleaner will restart).

What is removed in such a discharge:

This method will not help if:

• 🔌 The vacuum cleaner is not connected to the application.
• 🔄 Hanging in the loading phase.
• 📱 Mi Home shows offline error.

💡

Resetting via the app is the safest method, but it only works when the vacuum cleaner is stable connected to the Wi-Fi and account.

Frequent mistakes after resetting and how to fix them

Even after a successful Xiaomi reset 1C It can be incorrect. Let's look at the typical problems and solutions:

1.Vacuum cleaner doesn't connect to Wi-Fi

• 📶 Check if your router supports 2.4 GHz (5 GHz is not suitable!).
• 🔄 Reboot the router and vacuum cleaner.
• 📵 Make sure that the name of the network does not contain Cyrillic or special symbols.

2. does not build a map or drives chaoticly

• 🧹 Make sure there is enough lighting in the room (Xiaomi sensors) 1C They don't work well in the dark).
• 🚪 Close the doors to limit the space for the first card.
• 🔄 Make a soft reset and start cleaning again.

3. Quickly discharged after discharge

• 🔋 The first 2-3 cleaning cycles after reset can show reduced operating time – this is normal (the battery is calibrated).
• 📉 If the problem persists, check battery wear in Mi Home (Settings) → Battery status).

4. does not respond to voice commands

• 🎤 Xiaomi vacuum cleaner 1C Does not support voice assistants (e.g. Alice) – this is a hardware limitation of the model.
• 📱 Use only commands from the Mi Home app.

⚠️ Warning: If the vacuum cleaner beeps and flashes red when cleaning, it may indicate engine or brush error. Clean the rollers of the hair and check if they rotate freely.

How to restore the vacuum cleaner after reset: a step-by-step guide

After zeroing the settings Xiaomi 1C You need to reconfigure it. Follow this algorithm to get it back to work:

Step 1 Connect to Wi-Fi

1. Turn on the vacuum cleaner (Power button).
2. In the Mi Home app, click Add Device (+) → Vacuum cleaner → Xiaomi Mi Robot Vacuum 1C.
3. Hold the power and home buttons on the vacuum cleaner until you hear the beep.
4. Connect to a Wi-Fi network (2.4 GHz only!).

Step 2: Update the firmware

• 📲 Go to the device settings → Firmware update.
• 🔄 If a new version is available, install it (vacuum cleaner reboots).
• ⚠️ Don't interrupt! power outage during upgrades can put vacuum cleaner out of order.

Step 3: Set up a room map

• 🗺️ Start cleaning in Full Cleaning (not Zone Cleaning) mode!).
• 🚪 Close all doors so that the vacuum cleaner can inspect one room.
• 📏 After building the map, mark out rooms and forbidden areas in Mi Home.

Step 4: Calibration of sensors

• 🧹 The first 1-2 cleanings may be less accurate – that’s normal.
• 🔦 Check the cleanness of the sensors (especially the laser sensor on top and the infrared sensors on the bottom).
• 📏 If the vacuum cleaner “cannot see” the wall, wipe the sensors with a lilaless napkin.

💡

After reset, it is recommended to do a test cleaning in a small room (for example, in the bathroom) to check the correctness of the sensors without the risk of getting stuck.

FAQ: Frequent questions about resetting Xiaomi Mi Robot Vacuum 1C