How to Reset the Xiaomi Mi Vacuum: Step-by-step instructions

Smart homeowners often face situations where the device is not working properly or losing contact with the home. Resetting the settings of the Xiaomi Mi vacuum cleaner becomes a necessary solution when changing the router, changing the Wi-Fi password or experiencing software failures. This procedure returns the gadget to its original state, eliminating accumulated software errors.

The process of restoring factory parameters does not require special skills, but requires attention to detail. Depending on the model, whether it is Xiaomi Mi Robot Vacuum Mop 2 or earlier, the algorithm of actions may vary slightly. It is important to determine the type of your device before you start manipulating, so as not to get confused with the combinations of buttons.

In this article, we will discuss in detail all possible ways to reboot the system, learn how to force disable communication modules, clear internal memory of temporary files and re-register the device in the Mi Home application.

When you need a complete reset of settings

The main reason for performing Hard Reset is to lose a stable connection to the wireless network. If the Wi-Fi indicator flashes or lights orange and re-pairing is impossible, you need to clean the network settings, and this is also true when transferring a device to a new owner or when selling.

Another common scenario is a software failure in which the robot vacuum cleaner stops responding to commands or freezes during cleaning. Resetting to factory settings often eliminates mapping errors when the device "forgets" the layout of the apartment or creates incorrect virtual walls.

Sometimes the problem is not the vacuum cleaner itself, but the router. After replacing the Internet equipment or changing the type of network encryption (for example, switching from WPA2 to WPA3), Xiaomi smart devices can lose access to the Internet.

• 🔄 Permanent loss of communication with the Mi Cloud server.
• 📡 Changing the provider or installing a new router.
• 🗺️ Incorrect construction of a room map or disappearance of zones.
• 🔇 Failure of the device to execute voice commands or commands from the application.

⚠️ Warning: Before performing a reset, make sure the battery is at least 20%. interruption of the process due to discharge can cause software damage.

Preparation of the device for the recovery procedure

Before you start active action, you need to ensure stable conditions for the operation of the equipment, the vacuum cleaner should be at the charging station, as the process may take some time, and a sudden power outage is unacceptable, make sure that around the device there is enough free space for access from all sides.

Check the current version of the Mi Home app on your smartphone. Sometimes management issues arise from incompatibility between the phone's software and the robot's firmware. Updating the app to the latest version can solve the problem without having to reset completely.

It is also recommended to prepare your Wi-Fi network details in advance. You will need an exact network name (SSID) and password. Note that most Xiaomi models only support the 2.4 GHz band, so make sure your phone is connected to this frequency, not 5 GHz.

Method 1: Reset via physical buttons (Hard Reset)

The most versatile method that works even if the device is not connected to the network. On the top panel of most models Xiaomi Mi Robot Vacuum are physical control buttons, usually an on button and a return button to the base (house icon).

To perform the reset, you need to press two buttons simultaneously: Power and Home. Hold them for 5-10 seconds until you hear a voice message about the start of the reset or see the flashing of indicators. On some models, such as Xiaomi Vacuum Mop Essential, you may need to press only one power button.

Once the command is successfully executed, the device will emit a characteristic audible signal, and the voice module will report a reboot. The Wi-Fi indicator will flash quickly, signaling the transition to pairing mode, from which point the vacuum cleaner is ready for a new setup.

Combination: Hold [Power] + [Home] for 5-10 seconds


Result: Voice confirmation "Resetting Wi-Fi"

⚠️ Warning: Do not release the buttons immediately after the lights light up. Wait for voice confirmation or change in the pattern of blinking, otherwise the reset will not be activated.

Method 2: Reset via the Mi Home app

If the vacuum cleaner is still listed on the device list and has an Online status, you can perform a software reset, which is preferable because it is less stressful for the button mechanics. Open the Mi Home app and go to the control page of your robot.

In the upper right corner of the screen, click on the three-dot button or settings icon. In the menu that opens, look for a section that may be called "Device Settings," "General Settings," or "Wi-Fi." At the bottom of the list, the "Delete Device" or "Untie Device" option is usually located.

Once confirmed, the device will receive a command to clean up the network settings, and it is important to understand that in some models, this action simply removes the binding from the account, but does not reset the Wi-Fi module itself in mode, in which case you will still have to use a combination of buttons to put into pairing mode.

💡

If you change your router but leave the same name and password on the network, you may not need to reset your vacuum cleaner.Try simply restarting your router and waiting 10-15 minutes for the vacuum cleaner to reconnect itself.

Deleting the device from the account and cleaning the card

After the Wi-Fi module is technically reset, remove the old binding from your cloud account. Go to the device profile in the Mi Home app, select settings and click "Delete Device." Confirm action. This is a critical step if you plan to sell the vacuum cleaner or link it to another Xiaomi account.

The room map is automatically cleaned when it is completely reset, but sometimes the data may be saved. If the old map reappears or is not displayed correctly after resetting and resetting, you will need to recalibrate it, and then start cleaning around the perimeter without interrupting it.

In some cases, especially when changing the region in the application (for example, switching from Russia to China or vice versa), the map may not be built. Make sure that the region in the profile settings corresponds to the region selected when the device was first set up.

• 🗑️ Deleting the device breaks communication with the Xiaomi Cloud server.
• 📂 Cleaning history and expendables statistics will be lost.
• 🏠 Stored floor maps and virtual walls will be removed.
• 🔒 The reset does not affect the firmware version, only user data.

⚠️ Note: After deleting the device from your account, re-addition can take up to 5 minutes.Do not try to click search buttons often, this can block the discovery module.

💡

Complete deletion from your account is only necessary when you change your owner or region, and a button reset is enough for a simple reconnection to Wi-Fi.

Frequent Connection Errors After Resetting

Users often encounter a situation where a vacuum cleaner is found but not connected. One of the most common reasons is using a 5GHz network. Make sure your smartphone is connected to a 2.4GHz network at the time of setting up. If the router is broadcasting one network with a common name for both bands, try temporarily splitting them in the router settings.

Another problem is that there are special characters in the Wi-Fi password. Some older versions of firmware may not properly handle complex passwords with emojis or rare characters. Try temporarily simplifying a password that consists of only letters and numbers for successful initial synchronization.

Also worth checking is the settings of the firewall or antivirus on the router, which can block device requests to connect to Xiaomi servers. temporarily disable security features (such as DoS protection or firewall) for the time of setting up, then turn them back on.