How to Reset Xiaomi Wireless Headphones: Instructions for All Models

Xiaomi wireless headphones are some of the most popular accessories because of their combination of price, quality and functionality. But even the most reliable technology sometimes fails: the headphones stop connecting to the phone, one of them doesn't work, the sound is interrupted or the microphone is problematic. In 90% of cases, these problems are solved by completely resetting the settings to the factory. But how do you do it correctly so that you don't damage the device?

In this article, you will find detailed instructions for all current models - from the budget Redmi Buds 3 Lite to the flagship Xiaomi FlipBuds Pro. We will analyze not only the standard reset procedure, but also hidden button combinations for models with atypical controls, and also tell you how to avoid errors that can make headphones out of order. If you encounter a problem for the first time - do not worry: following our recommendations will return your headphones to work in 5-10 minutes.

Why do you need a reset?

Resetting to factory parameters is a last resort when other ways of solving problems have not worked.

• 🔌 Headphones do not connect to a phone or computer, although they used to work normally.
• 🎧 One of the headphones does not turn on or play sound (for example, only the right or left).
• 🔊 Constant interference, interruptions, or poor quality Bluetooth communications.
• 🔄 Headphones spontaneously turn off or reboot.
• 📱 After updating the firmware, there were glitches in the control (buttons, sensors do not work).

It is important to understand that reset removes all user settings: device binding, connection history, individual sound parameters (if any). However, it does not affect the firmware - its version will remain the same. If the problem was caused by a software failure, reset almost always helps. If it is a hardware malfunction (for example, a dead battery or a damaged speaker), repair will be required.

⚠️ Warning: Don't confuse resetting with firmware updates. The first erases user data, the second installs a new version of the software!

Preparation for resetting: what to do in advance

Before you start resetting, follow a few simple steps to avoid additional problems:

1. Check the battery. Make sure the headphones are at least 30 to 50 percent charged. If they run out during reset, the process may stop and the device will stop responding to the buttons.
2. Disconnect from all devices. Forget the headphones in the Bluetooth settings on your smartphone, tablet, and computer. This will prevent conflicts when you reconnect.
3. Prepare the case. For some models (e.g. Xiaomi Air 2 SE), the reset is only done when the headphones are in the case. Make sure it's charged too.
4. If you have the headphone manual, check the reset section, sometimes the manufacturer specifies unique combinations for a particular model.

If you use headphones with Mi Earphones app (such as Xiaomi Buds 4 Pro), it is recommended to:

• 📱 Take screenshots of current settings (Equalizer, gesture management).
• 🔄 Sync your data with your Mi Account if this feature is supported.

Resetting through buttons: a universal method for most models

Most Xiaomi wireless headphones are reset using a combination of buttons on the body. The algorithm is almost the same for all models, but retention time and sequence may differ. Below is a step-by-step guide for the most common lines.

Make sure your headphones are off |Put both headphones in your case (if required)|Battery charge at least 30% |Switch off Bluetooth on all devices-->

Instructions for Redmi Buds 3/3 Lite 4 Active and similar

These models are reset using the following algorithm:

1. Get both earphones out of the case.
2. Press and hold the touchpad on both headphones simultaneously for 10-15 seconds.
3. The indicators will flash red and white, signaling that the reset has begun.
4. Release the buttons and wait until the indicators light up red (off) and again white (on).
5. Place the headphones back in the case for 10 seconds, then pull out - they're ready for a new tether.

Instructions for Xiaomi AirDots / Air 2 / Air 2 SE

For these models, the process is slightly different:

1. Put both headphones in the case and close the lid.
2. Open the lid and press the button on the case (usually located on the side or back) for 15-20 seconds.
3. The indicator on the case will start flashing red and white - this means that the reset is done.
4. Take the headphones out of the case - they will automatically reboot.

Instructions for Xiaomi FlipBuds Pro / Buds 4 Pro

Flagship models require a more complex combination:

1. Make sure the headphones are off (put in the case for 5 seconds, then pull out).
2. Press and hold the touchpad on the right earphone for 5 seconds until you hear the beep.
3. Without letting go of the right earpiece, press and hold the touchpad on the left earpiece.
4. Hold both panels for another 10 seconds until the lights start flashing red and green.
5. Release the buttons – the headphones will reboot and will be ready for a new binding.

💡

If your headphones don't connect after reset, try updating your firmware through the official Mi Earphones app, which often solves compatibility issues.

Reset via Mi Earphones app: when buttons don't help

Some models (such as the Xiaomi Buds 3 Pro or FlipBuds Pro) support reset directly from the official app, which is more convenient because it doesn’t require remembering button combinations, but only works if the headphones have successfully connected to the phone at least once.

Here's how to do it:

1. Install the Mi Earphones app from Google Play or the App Store.
2. Connect the headphones to the phone via Bluetooth.
3. Open the application and go to the Device Settings → Reset.
4. Confirm the action – the headphones will automatically restart.

If the application does not have a reset option, try the following method:

• 📱 Go to Settings. → About the programme → Firmware version.
• 🔄 Click on the firmware version 5-7 times – this can open a hidden reset menu.

⚠️ Warning: Once reset via the app, the headphones can automatically update the firmware to the latest version. If you have had problems with the new firmware, this method will not work - use reset via buttons.

What if the reset didn't help?

If the headphones are still not working after reset, the problem may be deeper.

• 🔋 Check the battery: Try charging the headphones and case from another cable or power supply. USB-port.
• 📱 Test on another device: Connect your headphones to another smartphone or computer. If they work, there's a problem in your phone (e.g., a Bluetooth module crash).
• 🔄 Update firmware: Outdated software can cause conflicts. Use the Mi Earphones app to check for updates.
• 🛠️ Clean the contacts: Dirt or oxidation on the headphone contacts or case can interfere with charging and synchronization. gently wipe them with a cotton swab soaked in alcohol.

If none of these methods worked, it might be a hardware malfunction.

• 🔊 Disturbed speaker (sound distorted or missing).
• 🔋 Bloated battery (earphones quickly discharge or do not hold charge).
• 📡 Faulty Bluetooth module (earphones are not detected by any device).

In such cases, it is better to contact the Xiaomi service center or a proven master. Self-repair can lead to final failure, especially if it is a microelectronics.

How can we avoid problems in the future?

To avoid having to regularly drop headphones, follow the simple rules of operation:

• 🔌 Charge correctly: Use only the original cable and power supply. Do not leave your headphones on charge for more than 2-3 hours after full charge.
• 📱 Update your firmware regularly: New versions often fix bugs and improve communication stability.
• 🧼 Keep your headphones and case clean of dust and moisture. Use dry soft cloth or special wipes to clean.
• 🔄 Turn off correctly: Before removing the headphones in the case, turn them off (if the model supports manual shutdown).

Also avoid:

• ❌ Extreme temperatures: Do not leave your headphones in the sun or in the cold (such as in a car in winter).
• ❌ Mechanical impacts: Even small falls can damage a speaker or battery.
• ❌ Use of non-original accessories: Cheap covers or earpieces can break the tightness and cause short circuit.

💡

Resetting is not a panacea. If the headphones start to glitch after falling or getting moisture, the problem is likely hardware, and resetting won't help.

FAQ: Frequent questions about resetting Xiaomi headphones