Xiaomi smartphone owners often face the need to return the device to its original state, and the Redmi 10 model is no exception. This may be required when selling a gadget, after a failed application installation, or when the system begins to work unstable. The procedure for completely clearing the memory and returning to factory parameters is called Hard Reset or factory reset.
This operation deletes all user data, including contacts, photos, messages and installed applications. That is why it is critical to back up all important information to the cloud service or computer before starting any action. In this article, we will discuss in detail all available ways to restore the system on Redmi 10, including situations when the device screen does not respond to touch.
Don't be afraid of the word "reset," because in modern MIUI shells, this process is as automated and safe as possible for the hardware of the phone. However, ignoring the rules of preparation can lead to the loss of valuable data forever.
Preparation for a complete system reset
The first and most important step is to back up your data. Once you activate the reset function, it will be impossible to recover deleted files without backup. Make sure you sync your contacts with your Google or Mi Account account and the photos are saved in Google Photos cloud storage.
The process of formatting internal memory and reinstalling system files can take from 5 to 15 minutes, and if the device turns off at the most inopportune time, this can lead to damage to the system partition and the need to flash through the computer.
☑️ Redmi 10 Preparation for Reset
Note the linking of accounts. If the phone is on the theft protection, after the reset, the system will require you to enter the username and password from the last used Google account or Mi Account, without this data, you will not be able to activate the device for new owners.
⚠️ Warning: Removing the microSD card before the procedure is a must if you don't want it to be formatted as well.In some cases, the system may suggest clearing the external storage as well.
Reset via the smartphone settings menu
The easiest and safest way to get Redmi 10 back to factory is to use the operating system's regular menu, which is suitable for most situations where the screen is working properly and the interface is not hanging. You'll need access to the main settings menu.
To start, open the Settings app and scroll down to the bottom. We're interested in About Phone. Inside this section, you need to find the Reset option. On some versions of MIUI, the path may be slightly different, such as through the "Additional" or "Extended Settings" section.
Once you select "Erase all data", the system will issue a warning that all files will be destroyed. If you are ready to continue, click the appropriate button. You may need to enter a pattern lock or a screen unlock pin to confirm your actions.
💡
Before resetting via the settings menu, turn off the Internet, which will prevent remote files from accidentally synchronizing with the cloud in the last seconds of the system.
The device will reboot and the cleaning process will begin. The screen may display the Redmi logo or download animations. Do not touch the phone until the welcome screen with the choice of language appears.
| Parameter | Meaning/Action | Risk of data loss |
|---|---|---|
| Resetting method | Through the settings menu | Complete (all data) |
| Requirements | Work screen, access to the menu | No. |
| Difficulty | Low. | Minimum |
| Implementation time | 5-10 minutes | - |
Hard Reset via Recovery Mode
If the smartphone doesn't turn on, freezes on the logo or the touch screen stops responding, Recovery Mode is used. This method allows you to reset at the hardware level, bypassing the operating system. To enter this mode on Redmi 10, a combination of physical buttons is used.
Make sure the phone is completely off. If it's frozen, press the power button 10-15 seconds before vibration, then immediately proceed to the next step. Simultaneously press the volume buttons "Up" and power. Hold them until the Mi logo appears, then release the power button, but continue to hold "Volume Up."
You'll see the Main Menu menu, and you'll be able to navigate with volume buttons (up and down), and you'll have to choose the power button, and you'll have to select Wipe Data, then Wipe All Data, and you'll have to confirm the action by selecting Confirm.
What to do if the Recovery menu is in Chinese?
Once confirmed, the cleanup process will begin, and the progress will be reported by the percentage scale, and when completed, the message will appear "Data wiped successfully." Select the option Back to Main Menu, and then Reboot -> Reboot to System.
⚠️ Attention: Recovery mode is not running the touchscreen, all actions are done with strictly mechanical volume and on buttons.
Reset via Find Device
Remote reset is possible through Xiaomi Cloud or Google Find My Device, which is relevant if you lost your phone or it was stolen and you want to remotely erase your data, and you need the device to be on and connected to the Internet.
Go to the official cloud service website from any computer or other smartphone, log in with the same account used on Redmi 10, and select the model you want from the device list.
In the device management menu, find the "Clean Device" or "Erase Device" button, and the system will warn you of the consequences, and after confirmation, the command will be sent to the phone, and it will begin the reset procedure the next time it connects to the network.
- 📱 Availability: Works only with an active internet connection on your phone.
- 🔒 Security: Requires knowledge of the password from the owner’s account.
- 📍 Geolocation: Before reset, you can try to track the location of the gadget on the map.
This method is also useful if you have forgotten the graphical key to unlock the screen, but remember the data from the account. However, if two-factor authorization is enabled or the phone is not online, the method will not work until the connection appears.
Solution: Phone requires account
Once you reset your settings, Android and MIUI will activate FRP (Factory Reset Protection), a mechanism to prevent the stolen device from being used, and if the phone was linked to a Google account or Mi Account, it will require you to enter the password from that account when you first set up.
Enter the data that was used on your phone before the reset. If you changed your password recently, wait 24 hours — Google's standard security measure. Entering the wrong password repeatedly can temporarily block the ability to log in.
If you buy a used phone and see a request, it means that the previous owner did not log out before the sale, in which case you need to contact the seller to unlock, circumventing this protection without the owner's data is illegal and technically difficult.
⚠️ Attention: Attempts to bypass protection FRP With the help of third-party software, you can permanently lock your device or disrupt its operation.
Typical errors and their elimination
Users may experience a variety of problems during the reset process, often the phone freezes during the Clearing Up phase or restarts indefinitely, and if the reset process lasts more than 20 minutes, one of the system files may be damaged.
If you freeze on your logo after you reset, try to force the reset by holding the power button for 15 seconds. If that doesn't work, you'll need to re-enter Recovery Mode and try to reset, sometimes cleaning the cache through the Wipe Cache item in the recovery menu helps.
If the phone is running an Update error or similar error, it may indicate internal memory problems or incompatibility with the Recovery version. In such cases, it is recommended to contact the service center to flash through your computer using the Mi Flash Tool utility.
💡
If a standard reset does not solve the problem with the freezes, the reason may lie in physical memory damage or the need for a complete flashing of the device.
It is important to understand the difference between a software failure and a physical breakdown: If the phone is warming, making extraneous sounds or resetting does not help more than 2-3 times, a hardware part diagnosis is likely required.