How to reset the settings of the vacuum cleaner Xiaomi G1: 3 ways + error solving

Xiaomi Mi Robot Vacuum G1 (or Xiaomi G1) is a popular laser navigation model that can eventually malfunction. The problems are different: the device does not listen to commands from the application, forgets the map of the room, constantly gives out errors or refuses to turn on. In 80% of these cases, resetting to factory settings helps. But how do you do it correctly, so as not make things worse?

In this article, we will look at three proven reset methods (including hidden service commands), a table deciphering errors after reset, and instructions for restoring the vacuum cleaner. We will look at when you need a soft reset and when you need a hard reset.

When do I need to reset the Xiaomi G1 settings?

You don't have to reset your vacuum cleaner settings when you first get a problem, because it's often easier to fix it. For example, if the Xiaomi G1 doesn't respond to the app, check your Wi-Fi connection first or restart your smartphone. But there are situations where resetting is the only way out:

• 🔄 The vacuum cleaner “hangs” during cleaning and does not respond to buttons or voice commands.
• 🗺️ The device does not save a map of the room or builds it incorrectly (for example, "sees" walls where they are not).
• 📱 The Mi Home app (or Xiaomi Home) doesn’t connect to the vacuum cleaner, although it’s on and flashes the indicator.
• 🔋 The battery is discharged too quickly (for example, it holds a charge of less than 20 minutes), although it previously lasted longer.
• 🛠️ After updating the firmware vacuum cleaner began to behave inadequately (for example, drives in a circle or ignores the cleaning areas).

If you experience at least one of these symptoms, try a soft reset first.This is safe and does not delete stored data. Hard reset only if the soft reset has not helped or you plan to sell/transfer the vacuum cleaner to another person.

⚠️ Note: After a full reset, Xiaomi vacuum cleaner G1 It will remove all stored room maps, suction power settings, cleaning schedules and no-go data, and the Mi Account will also reset, you have to reconnect the device.

Method 1: Soft Reset (Soft Reset)

This is the most gentle method, which does not affect user settings, it helps if the vacuum cleaner is “hanged” or malfunctioning due to a temporary software failure. For the Xiaomi G1, the soft reboot is performed as follows:

1. Press and hold the power button on the vacuum cleaner body for 10 seconds.
2. Release the button when the indicator goes out (usually in 5-7 seconds).
3. Wait 30 seconds, then press the power button again to turn on the vacuum cleaner.

If the problem persists after the reboot, try reconnecting the vacuum cleaner to the application:

• 📱 Open Mi Home → Find your Xiaomi G1 device-list.
• 🔄 Click on three dots in the upper right corner → Remove the device.
• 🔍 Start searching for new devices and add the vacuum cleaner again (click the button on the case when the application asks for it).

Soft reboot doesn't help? Go to the next one.

Method 2: Complete reset via buttons (Hard Reset)

This method deletes all user data and returns the vacuum cleaner to the factory settings.

• 🔄 Soft reset didn't help;
• 📱 The vacuum cleaner does not connect to the application even after restarting;
• 🛠️ You plan to sell or transfer the device to another person.

Instructions for Xiaomi Mi Robot Vacuum G1:

1. Turn off the vacuum cleaner with a long press on the power button (5 seconds).
2. Turn the device over and find a small hole on the bottom panel that says RESET (near the power button or under the battery cover).
3. Take a paperclip or toothpick and press the RESET button, holding it for 10-15 seconds until you hear the beep.
4. Release the button and turn on the vacuum cleaner with the power button. It will begin the reset process (the indicator will flash orange).
5. Wait for completion (about 2-3 minutes) - the vacuum cleaner will emit a long sound signal and reboot.

After hard reset vacuum cleaner Xiaomi G1 will be like new: will have to re-

• 📱 Connect it to the Mi Home app;
• 🗺️ Create a map of the premises;
• ⚙️ Set up suction power, cleaning schedule and no-go zones.

⚠️ Warning: If the vacuum cleaner does not turn on after hard reset or flashes red, this may indicate a hardware malfunction.In this case, contact the service center - self-repair may deprive you of warranty.

💡

Before resetting, take a picture of the current vacuum cleaner settings in the application (suction power, schedule, cleaning areas) and this will save time when reconfiguring.

Method 3: Reset via Mi Home (alternative method)

If the vacuum cleaner is still connected to the application but is unstable, you can try resetting software, which is less radical than hard reset, but also deletes user data.

Instructions:

1. Open the Mi Home app and select your Xiaomi G1.
2. Go to the device settings (cog in the upper right corner).
3. Scroll down and find Reset (or Restore Factory Settings).
4. Confirm the action – the vacuum cleaner will begin the reset process (it may be necessary to enter a password from your Mi Account account).

If you don't have Reset on the menu, your firmware version doesn't support this feature, so use hard reset via the button (Method 2).

What to do if the vacuum cleaner is not discharged?

Sometimes the Xiaomi G1 may not respond to reset attempts, and here are the typical reasons and solutions:

• 🔋 Battery discharged: If the indicator flashes red or does not burn at all, connect the vacuum cleaner to the charging station for 30 minutes, then repeat the reset.
• 🔌 Faulty button RESET: If the button doesn't press or work, try using a thinner object (like a needle). Don't push too hard - you can damage the micro-switch.
• 📲 Firmware conflict: If the vacuum cleaner was updated "over the air" and then stopped working, try rolling back the firmware through the application (if available). To do this, in Mi Home, find the Software Update section and select the previous version.
• 🛠️ Hardware failure: If none of the methods worked, and the vacuum cleaner does not turn on or makes atypical sounds (screaming, squeaking), contact the service. Possible problems: malfunction of the motherboard, damage to the battery or motor.

If the Xiaomi G1 vacuum cleaner produces an E4 or E5 error after the discharge, it indicates a problem with the collision sensors or the laser module, in which case a diagnosis is required at the service center - self-repair can aggravate the breakdown.

How to restore the vacuum cleaner after discharge?

After a successful reset, the Xiaomi G1 will need to be reconfigured. Here is a step-by-step instruction:

1. Connection to the annex: 📱 Open Mi Home → press Add the device (+ top-right). 🔍 Select the category of vacuum cleaners → Xiaomi Mi Robot Vacuum G1. 🔄 Follow the instructions on the screen (click the button on the vacuum cleaner when the app asks for it).
2. Wi-Fi setup: Make sure your router is running at 2.4GHz (vacuum cleaner does not support 5GHz).If Wi-Fi is dual-band, temporarily turn off 5GHz in the router settings.
3. Creation of a map of the premises: 🗺️ Start cleaning in Full cleaning mode - the vacuum cleaner will build the map itself. 📏 Once completed, check the map in the app and edit if necessary (add walls, no-go zones, etc.).

Schedule and zones setting:

Return the previous power settings, cleaning schedule and no-go zones (if you saved screenshots before reset).

If the vacuum cleaner does not save the card after reset or "lost" during cleaning, try:

• 📶 Reconnect it to another Wi-Fi hotspot (maybe the current network has a weak signal).
• 🔄 Update the firmware to the latest version (in Mi Home) → Settings of the device → Update of the PO).
• 🧲 Check if there are any sources of interference nearby (microwaves, other robot vacuum cleaners, Bluetooth speakers).

💡

Once reset, the Xiaomi G1 can run the first 1-2 cleanings less accurately — that’s normal.

Typical Resetting Mistakes and How to Avoid Them

Many users make mistakes that lead to additional problems, and here are the most common ones:

• ⚡ Reset during charging: Never perform a hard reset when the vacuum cleaner is connected to the charging station.This can cause the firmware to fail.
• 🕒 Interrupting process: If the reset is interrupted (e.g., take out the battery or turn off the power), the vacuum cleaner may stop turning on).
• 📵 Use of a non-original charger: After reset, connect the vacuum cleaner only to the original charging station. Cheap analogues can damage the battery.
• 🔧 Self-repair without diagnosis: If the error persists after reset (e.g. flashes) E3), Do not disassemble the vacuum cleaner yourself - contact the service. Incorrect disassembly can damage the laser module or sensors.

If you are in doubt about which reset method to choose, start with the soft reset and only if it does not help, go to hard reset.

FAQ: Frequent questions about the Xiaomi G1 reset