Resetting the Xiaomi remote: full instructions for all models

Xiaomi’s remotes are not just buttons to switch channels, but smart devices with settings memory, Bluetooth synchronization, and even voice control. Over time, they can start to glittle: do not respond to commands, lose communication with the TV or smart lamps, and sometimes stop working altogether. In 80% of these cases, factory resetting helps – a procedure that returns the remote to its original state, as after purchase.

But how to do this so as not to make the problem worse? In this article, we will examine all the ways to reset for different models of Xiaomi remotes, from the classic Mi Remote Controller to the remotes for Mi TV Stick and smart homes. You will learn when the reset is really necessary, and when the problem lies in something else (for example, in dead batteries or interference from other devices), and we will also discuss in detail the hidden functions of the engineering menu, which the manufacturer does not advertise, but can save the remote from recycling.

When you need to reset the Xiaomi remote settings

Before you rush to reset, make sure that the problem is the software failure, not the hardware failure.

• 🔄 The remote does not sync with a TV or smart device, although it used to work.
• 🔋 Buttons react with a delay (more than 2 seconds) or double press.
• 📱 In the Mi Home mobile app, the remote is displayed as "offline", although the batteries are charged.
• 🔊 The XiaoAI voice assistant has stopped recognizing commands or is responding inadequately.
• 🔄 After the TV firmware update, the remote stopped switching channels correctly.

If the remote is not turned on at all (no indication when pressing buttons), is not charged or physically damaged (cracks, fluid intrusion), reset will not help, in such cases, repair or replacement is required.

⚠️ Warning: Resetting will remove all stored devices from the remote's memory. After the procedure, you'll have to re-attach the TV, air conditioner or smart lamps. Prepare the synchronization instructions in advance!

Preparation for resetting: what to do in advance

To make the reset go smoothly, follow a few simple steps:

1. Check the battery. If the remote is battery-operated, make sure it's at least 30 percent charged. Resetting at low charge can result in a breeze (complete failure).
2. Disable other Bluetooth devices. There should be no active headphones, smartwatches or speakers within a 5-meter radius - they can interfere with the procedure.
3. Prepare the PIN- code. For some models (for example, Mi TV Stick 2023) after reset, you will need to enter the standard code 0000 or 1234.
4. Take a picture of your current settings. If the remote controls your smart home, take a screenshot of the configurations in the Mi Home app.

For touch screen remotes (for example, Mi Touch Remote*), you will additionally need a stylus or toothpick - it is more convenient to press hidden reset buttons.

Method 1: Hardware reset (for all models)

It is a versatile method that works on 90% of Xiaomi remotes, including:

• 📺 Mi Remote Controller (white/black version)
• 🎮 Mi Game Controller
• 🏠 Smart remotes for Mi Home (series MJYD, RTCN)
• 📱 Remotes for Mi TV Stick and Mi Box

Instructions:

1. Turn over the remote and find the hidden reset button. It's usually located: In the hole next to the battery compartment (you need a paper clip) Under the battery cover (on models with Li-ion battery) On the back side under the label (take care of it).

10-15 seconds

3 times red

Release the button. The remote will automatically reset (white light will light up).

If the indicator doesn't flash, try:

• 🔋 Replace the batteries with new ones (even if they seem charged).
• 🔌 Connect the remote to charging for 5 minutes, then reset again.
• 📱 Hold the reset button for longer, up to 20 seconds.

Method 2: Reset via engineering menu (for Mi TV Stick and Mi Box)

The remotes for Android TV- consoles (Mi TV Stick 4K, Mi Box S) are reset via a hidden menu, which also restores communication with the console if the remote "uncoupled" after the update.

Step-by-step:

1. Turn on the console and wait for the main screen to load.
2. On the remote, simultaneously press the buttons: Menu (⋮) + Volume up (↑) + OK Hold them for 5 seconds until the Factory Reset menu appears on the screen.
3. Select Reset Remote (or Clear Pairing for resetting) from the menu.
4. Confirm the action with the OK button. The remote will reboot, and the Remote paired successfully message will appear on the screen.

If the menu does not open:

• 🔄 Try another combination: Home (🏠) + Back (←) + Volume down (↓).
• 📺 Update the console firmware to the latest version (in System settings → Software Update).
• 🔌 Connect the remote to the console with USB-OTG cable (if supported) and try again.

⚠️ Warning: On the Mi TV Stick consoles, you may need to reset the Wi-Fi after resetting the remote. Prepare your network password in advance!

Method 3: Reset via Mi Home (for smart remotes)

If your remote controls your smart home, it can be reset directly from the mobile app, which is suitable for models:

• 🏠 Xiaomi Smart Remote (series RTCN03, MJYD02YL)
• 💡 Smart lamp remotes (Yeelight, Aqara)
• 🌡️ Air Conditioner (Mi Air Conditioner Companion)

Instructions:

1. Open the Mi Home app and go to Devices section.
2. Find your remote in the list and tap it.
3. In the upper right corner, press ⋮ → Device settings.
4. Select Reset settings (or Remove device if remote is not responding).
5. Confirm the action. The remote will flash blue and emit an audible signal.

If the remote is not displayed in the application:

• 📱 Reinstall Mi Home and log in again.
• 🔄 Reboot the router – sometimes remotes lose communication due to a network failure.
• 📡 Check if Bluetooth is on on your smartphone (required to communicate with the remote).

💡

If the remote does not sync with smart devices after reset, try adding it again through Add Device → Other Devices → Remote control in Mi Home.

Method 4: Reset via ADB (for advanced users)

This method is suitable for remotes integrated into Android TV- consoles (Mi TV Stick, Mi Box), if the standard methods did not work. You will need a computer with ADB- drivers installed and USB debugging enabled on the console.

Step-by-step:

1. Connect the console to the computer via the USB- cable.
2. Open the command line (Win + R → cmd) and type: adb devices Make sure your device appears in the list.
3. Reset command: Adb shell am broadcast -a android.intent.action.MASTER_CLEAR
4. Wait for the console to reboot (about 2 minutes). The remote will be reset automatically.

If the command doesn’t work, try an alternative:

adb shell settings put global hidden_api_policy 1


adb shell am start -n com.xiaomi.mitv.remotecontroller/.MainActivity --ez clear_data true

⚠️ Warning: Incorrect use of ADB can lead to a console blink. Don't follow commands unless you're sure they're intended!

💡

ADB discharge is a last resort, only if other methods have failed and you understand the risks.

What to do after resetting: setting up the remote again

After a successful reset, the remote will return to the factory settings.

1. Sync with TV/Set-top box: For Mi TV Stick: press Home + ↓ for 3 seconds until you request pairing. For smart remotes: in Mi Home, select Add Device → Remote.
2. Set up Voice Assistant (XiaoAI): Press the microphone button for 5 seconds until the voice greeting sounds. Follow the instructions to link to your Xiaomi account.

Update the remote firmware:

• In Mi Home, check for updates in the Device Settings → Software Update section.
• For Mi TV Stick, the console update is automatically done along with the console.

If the remote does not want to synchronize after reset:

• 🔄 Reboot the TV/set-top box (pull the power cord for 30 seconds).
• 📡 Change the Wi-Fi channel on the router (sometimes interference on channel 6 or 11 interferes with Bluetooth communication).
• 🔋 Check the batteries, even new ones can be discharged if they have been in storage for a long time.

FAQ: Frequent questions about Xiaomi remotes reset