Resetting settings on the robot vacuum cleaner Xiaomi G1: 5 proven ways

Xiaomi Mi Robot Vacuum G1 is one of the most popular cleaning assistants, but even it sometimes requires a complete reboot. It may have started to glittle after a firmware update, does not respond to commands from the Mi Home app, or you just want to sell the gadget and delete all personal data. In any case, resetting to factory settings solves most software problems.

However, not everyone knows that the Xiaomi G1 has 5 ways to reset, from a simple restart to completely delete all data through the service menu. In this article, we will analyze each method, explain when to use it, and warn against typical errors that can turn your assistant into a “brick”.

If you've never reset your smart tech settings before, don't worry: it takes less than 10 minutes, and all the actions are accompanied by in-app prompts, the key is not to interrupt the process and follow the instructions, let's start with the safest method.

1. Mild discharge through the power button

This method is suitable if the robot vacuum cleaner Xiaomi G1 started to brake, does not respond to commands from the remote or in the application Mi Home shows a connection error. Soft reset does not remove stored maps of premises and settings, but simply restarts the system — like restarting a smartphone.

To perform the procedure:

1. Make sure the vacuum cleaner is not in the charging station.
2. Find the power button on the case (usually it is under the lid with the Xiaomi logo).
3. Hold it for 10-15 seconds until you hear the beep.
4. Release the button and wait for a full reboot (the robot will make a melody and blink the indicator).

If you have problems after a soft reset, move to the next method. Note: this method does not help if the vacuum cleaner is blocked after a failed firmware update or change your Mi Account.

2. Complete reset via the Mi Home app

The most convenient and safest way to return the Xiaomi G1 to factory settings is to use the official app, which deletes all data, including:

• 🗺️ Stored maps of premises and cleaning areas
• 🔧 Individual power, schedule and voice command settings
• 🔒 Link to Mi Account (reconnection required)

Step-by-step:

1. Open the Mi Home app and go to the tab with your vacuum cleaner.
2. Slip on the three dots in the upper right corner → select Device Settings.
3. Scroll down and click Reset Settings (or Delete Device if you want to untie it from your account).
4. Confirm the action by entering the password from Mi Account.

It takes about 2-3 minutes, and the robot will emit a long beep and reboot, and then it can be reconnected, just like it was after the purchase.

Make sure the vacuum cleaner is charged at least 30 times%|

Connect your phone to stable Wi-Fi|

Pre-save screenshots of settings (if you need to restore later)|

Shut down. VPN (It can block access to Xiaomi servers)-->

⚠️ Warning: If the vacuum cleaner doesn’t appear in the Mi Home device list after the reset, try reinstalling the app or changing your account region to China – sometimes this solves connection problems.

3. Hardware reset through buttons on the body

If the Mi Home app doesn't see the vacuum cleaner and soft reset didn't help, use the hardware method. It works even when the firmware is blocked or the Wi-Fi connection is out of order.

Instructions for Xiaomi Mi Robot Vacuum G1:

1. Turn off the vacuum cleaner (press the power button for 3 seconds).
2. Turn the device over and find two buttons: 🔄 Reset button (small, next to the wheel) 🔋 Power button (large, on the top panel)

both buttons

white-collar

Release the buttons and wait for the reboot (the robot will emit a series of signals).

If the indicator does not catch fire, repeat the procedure or check if the batteries are dead (connect the vacuum cleaner to charging for 30 minutes).

4. Reset via voice assistant (for firmware 2023+)

The latest firmware versions for the Xiaomi G1 have introduced voice commands for resetting, which only works if the vacuum cleaner is connected to the Mi Home and you have a voice assistant set up (like Alice or Google Assistant).

To reset the settings to voice:

1. Activate the voice assistant (e.g., say, “OK, Google”).
2. Say the command: “Reset the settings of the robot vacuum cleaner Xiaomi G1”.
3. Confirm the action by voice or through a notification in Mi Home.

Voice reset does not remove maps of the room, but resets all personal settings (power, schedule, device name), which is convenient if you want to quickly return the vacuum cleaner to basic parameters without completely cleaning the memory.

5. Reset via service menu (for power users)

This method is designed for advanced users and is used if standard methods do not work. Service menu allows you not only to reset settings, but also to check the status of the battery, sensors and Wi-Fi module.

To enter the service menu:

1. Turn off the vacuum cleaner.
2. Press the power button and simultaneously press the reset button 3 times (the small button next to the wheel).
3. Release the power button when you hear two short signals.
4. The robot will turn on in service mode (the indicator will flash blue).

On the service menu:

• 🔧 Press the power button 1 time - sensor test.
• 🔋 Press 2 times - check the battery.
• 🗑️ Press 3 times – Complete resetting of settings.
• 🔄 Press 4 times - exit unchanged.

⚠️ Warning: Do not interrupt the testing process in the service menu, this can damage the firmware. If the robot is stuck in this mode, remove the battery for 10 minutes (it will require disassembly of the case).

💡

If the vacuum cleaner does not connect to Wi-Fi after reset, try changing the router channel to 2.4 GHz (5 GHz is not supported) or disable the Smart Connect function in the router settings.

What do I do after the dump?

After a successful reset, the Xiaomi G1 will return to factory settings.

1. Connect the vacuum cleaner to Mi Home again (scan) QR-bottom-line).
2. Update the firmware to the latest version (check in Settings → Software Update).
3. Set up a room map (start cleaning in Map mode).
4. Restore the schedule and cleaning areas (if you saved screenshots before resetting).

If the vacuum cleaner is unstable after the discharge (for example, does not build a map or does not respond to commands), try:

• 🔌 Connect it to charging for 1-2 hours (sometimes a discharged battery causes glitches).
• 📶 Reconnect to another Wi-Fi network (e.g., a mobile access point).
• 🔄 Repeat the reset by another method (for example, through a service menu).

💡

After reset, be sure to update the firmware - this will correct known bugs and improve the stability of the vacuum cleaner.

FAQ: Frequent questions about the Xiaomi G1 reset