Smart homeowners often face situations where the gadget stops responding correctly to commands or loses contact with the router. Xiaomi Robot Vacuum 1C is no exception to the rule. In some cases, for example, when selling the device or after moving to a new home, there is an urgent need to return the system to factory parameters.
Reset procedures may be required if you change your Wi-Fi network and can’t reconnect your device, or if there are software errors in the system. It’s important to understand the difference between a simple reboot and a full Hard Reset that completely erases user data. In this article, we’ll take a look at all the nuances of restoring your assistant’s factory state.
In which cases a complete system reset is required
There are scenarios where resetting is the only way to restore functionality, most often due to network problems or transfer of ownership.
If you move into a new apartment, the old Wi-Fi address is no longer relevant. The vacuum cleaner may stubbornly try to connect to a router that is not nearby, ignoring the new settings, in which case cleaning the network memory is mandatory.
Also, a reset is necessary when selling a device, and the new owner doesn't have to have access to your cleaning history or the ability to operate machinery through your Mi Home app, which is not just a matter of convenience, but also of digital hygiene.
- 📡 Change your router or provider when your device doesn’t see a new network.
- 🔄 Selling or transferring a vacuum cleaner to another person.
- 🐛 Critical software failures, freezes or navigation errors.
- 🔑 Forgotten password from the account to which the robot is attached.
Sometimes users confuse the need to reset with simply discharging the battery.Make sure the problem isn't solved by simply charging or cleaning the sensors.
Preparation of the device for the recovery procedure
Before you start manipulating the buttons, you need to make sure that the robot vacuum cleaner Xiaomi 1C is ready for the process.Unprepared device can turn off at the most inopportune moment, which will damage the file system.
First, check the charge level. To successfully reset and then adjust the battery should be at least 20-30%. If the indicator flashes red, put the device on the base.
⚠️ Note: Do not reset if the robot is in the process of cleaning or charging less than 15 minutes after a deep discharge.
Also, you should release the top cover of the device in advance. On the 1C model, the control buttons are located under the cover, which you need to access in advance. Make sure that the dust and water container (if there is a wet cleaning module) is installed correctly, as some models block work in the absence of a tank.
💡
Before resetting, open the Mi Home app and make sure you remember which region the device was tied to, and you have to reset the region.
Physical Reset Method through the Reset Button
The most reliable and quickest way to return the device to its original state is to use a physical button. On the Xiaomi Robot Vacuum 1C model, it is hidden under the top cover, which prevents accidental pressing during cleaning.
First, remove the top cover of the vacuum cleaner, and you'll see a control panel with a few indicators and buttons, and we're interested in a button labeled Reset or that has a corresponding icon next to the Wi-Fi indicator.
The discharge process is as follows:
- Turn on the robot vacuum cleaner if it's turned off.
- Press and hold the reset button for 5-10 seconds.
- Wait for a voice message about the beginning of resetting or changing the flashing mode of the Wi-Fi indicator.
- Release the button after confirming the action.
After that, the device will restart. The Wi-Fi indicator should start flashing often, signaling the pairing mode, which means that the memory has cleared, and the robot is ready for a new binding.
☑️ Checklist of physical discharge
Resetting settings through the Mi Home app
If you have physical access to an application that has a vacuum cleaner registered, you can do a software-based tether reset, which is convenient if you just want to untie the device from your account, but you don't have to clear all internal memory from logs.
Go to the Mi Home app on your smartphone. Select your Xiaomi 1C robot vacuum cleaner card. In the upper right corner of the screen, find the three-dot icon or gear — this is the device settings menu.
In the menu that opens, scroll down to the bottom, and you'll find "Delete device" or "Untie" -- pressing this button will break the connection between the phone and the vacuum cleaner -- but to completely reset the network settings of the robot itself, you often need to press the button combination on the body, as described in the previous section.
| Action. | The result | The Necessity of the Internet |
|---|---|---|
| Removal from Mi Home | Breaking the account connection | Required. |
| Reset button on the body | Complete reset of Wi-Fi and memory | Not required |
| Reboot (Power) | Switching on/off | Not required |
It is important to note that deleting from an application does not always ensure that the network settings inside the robot are cleaned.
What to do if the button does not respond?
Solving Connection Problems After Reset
Once you have successfully reset, the Xiaomi 1C robot vacuum cleaner goes into standby mode, at which point users often encounter difficulties, the main reason being the incompatibility of Wi-Fi frequencies.
Xiaomi smart devices typically only work in the 2.4GHz band. If your router broadcasts a 5GHz network or combines them into one with a 5GHz priority, the vacuum cleaner may not see the network.
⚠️ Warning: Make sure the phone you are setting is on GPS (Without this permission, the Mi Home application will not be able to detect a vacuum cleaner on the local network.
Also check if the router is not filtered by MAC-Once reset, the robot can request a connection with a new ID that needs to be authorized.
Connection process:
- 📱 Open Mi Home and press «+».
- 🔍 Select regional settings (usually Russia or China).
- 📡 Choose the Xiaomi Robot Vacuum 1C list.
- 🔑 Enter a password from a 2.4 GHz Wi-Fi network.
If the Wi-Fi indicator on the case is constantly on, then the connection is successful. If it flashes, the connection process is underway. Prolonged blinking without a result indicates a password error or a weak signal.
💡
The main reason for connection errors after reset is the use of a 5 GHz network or the lack of access rights to geolocation on a smartphone.
Cleaning the room map and navigation
The 1C series of robots build a detailed map of your apartment, and if you have renovated, remodeled furniture, or just moved, the old map will interfere with effective navigation.
Resetting Wi-Fi does not always automatically delete saved maps. To clear the navigation memory, you need to go to the map settings in the app, where you can find the option "Reset card" or "Delete card".
After that, the robot vacuum cleaner must start the complete cleaning to build the new model of the room from scratch, at which point do not interrupt the device and do not move it from place to place, otherwise the map will be incorrect.
Sometimes the map can be “left” or distorted, in which case a full system reset (Hard Reset) is the best solution, since it deletes all temporary navigation files accumulated during operation.
The sequence of actions for complete cleaning:
1. Reset Wi-Fi reset button.
2. Remove the device from the Mi Home.
3. Re-introduce the device.
4. Starting a complete cleaning to build a new map.Frequent errors and ways to fix them
There may be specific errors in the operation and recovery of settings, and understanding their codes will help to avoid unnecessary panic and unnecessary trips to the service center.
For example, if the robot makes a voice message after the reset, check if the sensors are clean, and the reset could activate a deep self-diagnosis that revealed contamination.
A server connection error often occurs when the router is blocking foreign domains, since Xiaomi servers may be located abroad. DNS-servers in router settings at 8.8.8.8 or 1.1.1.1.
- 🔴 Error 1: Side brush stuck. Check the mechanics.
- 🔵 Mistake 4: The main wheel is clogged.
- 🟡 Error 10: The filter is blocked or missing.
- 🟣 Network Error: Incorrect password or Wi-Fi frequency.
If none of the reset methods helps, and the robot continues to behave inadequately, it may be necessary to flash the device through special utilities, but this is a more complex procedure that requires qualification.