How to reset the settings on the robot vacuum cleaner Xiaomi G1: the full guide

Modern smart cleaning devices such as the Xiaomi Dreame Vacuum G1 require periodic user intervention to work properly. In some cases, standard container or filter cleaning methods are not enough, and it becomes necessary to completely return to factory parameters. Resetting becomes a critical step if the gadget stops responding to commands, loses communication with the router or freezes during cleaning.

This procedure is often required when changing routers, moving to a new home or after buying a used device. It is important to understand the difference between simply restarting the system and fully formatting user data. Resetting the power button for 10 seconds activates pairing mode, not a complete memory cleanup.

In this article, we will discuss in detail all the available ways to reinitialize your assistant’s software, we will look at both software methods through a mobile application and hardware options using physical buttons on the case, which will help you choose the most suitable option for your particular situation and model.

When you need a complete reset of parameters

Users often experience situations where the device is not behaving properly, such as chaotic movement around the room, refusal to return to base, or permanent disconnection from the network. System failure is one of the most common reasons for a cleanup procedure. If your Dreame G1 starts to "glut", this is the first signal to action.

And the reset is also necessary when you change your Internet equipment. MAC-Addresses and passwords that are stored in the vacuum cleaner memory, and when you install a new modem, the old network profile becomes useless, in which case you need to delete the old Wi-Fi data and register the device again.

Another important aspect is selling or transferring the device to another person, and before you give it away, you need to make sure that your personal data, cleaning history and account binding are deleted, which guarantees your digital security and allows the new owner to customize the equipment from scratch.

• 🔄 The device is constantly losing connection to the Mi Home app.
• 📡 You have changed your provider or password from your home Wi-Fi network.
• 🧹 Robots begin to ignore virtual walls or no-go zones.
• 💾 Planned sale or transfer of the device to third parties.

⚠️ Warning: Before starting the procedure, make sure that the battery is at least 20%.If the device turns off during the formatting process of system files, this can lead to serious errors in the operation of the controller.

Preparation of the device for the discharge procedure

Before you start active, you need to conduct a number of preparatory activities, which will help to avoid unforeseen errors and make the process as smooth as possible, first of all, you should check the state of the battery, low charge can interrupt the process of rebooting modules, which will lead to unstable operation.

It is also recommended to release the dust collector and clean the filters. Although this does not directly affect the software reset, a clean device is easier to test after recovery. Make sure that the brush is not wound with hair and the sensors are wiped from dust. This will eliminate mechanical factors that can be mistaken for software failures.

An important step is to prepare your smartphone. Make sure your mobile device has the latest version of the Mi Home or Xiaomi Home app installed. Older versions of the software may not properly display the status of the device after the reset. Also check if Bluetooth and geolocation are enabled, as they are often used for initial setup.

Resetting method through mobile application

The most civilized and safe way to bring the Xiaomi G1 back to factory settings is to use official software, which allows you to remove your device from your account and clear the cached data on the server. First, open the app and go to the main menu, where all the connected gadgets are displayed.

Select your robot vacuum cleaner from the list. It's usually on the home screen or in the Devices section. Click on the three-dot icon at the top right of the screen to open the settings menu. Here you need to find the device control item. Different versions of the interface may call it different names, but the essence is one - delete the profile.

Once you select the deletion point, the system will request confirmation of your actions, which is random press protection, and once you accept the warning, you will start the detachment process, and the robot will receive a command to clear the network settings and return to the pairing standby mode, and now it is ready for a new registration.

If the standard path doesn't work, you can try to clear the app's cache. Go to your phone's settings, find the Apps section, select Mi Home, and click Clear Data. This won't delete your account, but update your local caches, which sometimes helps solve problems with displaying device status.

• 📱 Open the Mi Home app on your smartphone.
• ⚙️ Go to the device-specific settings (three dots).
• 🗑️ Select the option "Delete Device" or "Unbind".
• ✅ Confirm the action in the pop-up window.

💡

If after removal in the application, the robot has not switched to pairing mode, try manually start resetting with a button on the body, as described in the next section.

Hardware reset buttons on the body

There are times when the software method is not available: the application does not work, the phone is lost or the device simply does not see the network. In such cases, a physical reset comes to the rescue. The Xiaomi G1 body has special button combinations to initiate a reboot of modules.

The main method involves holding the power button. Find the power button on the top of the device. Press and hold it for a long time — usually about 10-15 seconds. The indicators can flash or change color, signaling the transition to service mode. At this point, the temporary files are cleared.

For a deeper reset that includes a Wi-Fi network, a combination of buttons is often used. G1 This can be the simultaneous pressing of the on and back buttons (or local cleaning buttons, depending on the modification). 5-7 seconds before a characteristic audible signal or voice message.

Combination for Wi-Fi reset:


1. Press and hold the Home button (base).




2. Press the switch on at the same time.




3. Hold 5 seconds to the beep.

Once the procedure is completed, the Wi-Fi indicator should start flashing, which means switching to setup mode, and you can now add the device to the app as new.

⚠️ Attention: Do not use sharp objects to press buttons if they are recessed in the case.This can damage the membrane or lead to short circuit.Use a finger or plastic rod.

Restore network connection after reset

Once you've done the reset, the device becomes a blank slate. It no longer knows your home network exists. The next step is to reconfigure the Wi-Fi, which requires care, as errors in password or signal frequency can lead to problems again.

4GHz.If your router is broadcasting a 5GHz network under the same name, the vacuum cleaner may try to connect to it and fail.It is recommended to temporarily split the networks or turn off 5GHz during setup.

Open the Mi Home app and press + to add a new device. The system will automatically find the vacuum cleaner in pairing mode. Select it from the list and follow the instructions on the screen. Enter the Wi-Fi password. Make sure the input language is correct and there are no unnecessary spaces.

Solving Common Problems in Resetting

Even if you follow all the instructions, you can have a problem. One of the common problems is that the device doesn't go into pairing mode, in which case you try to completely discharge the battery, then put the vacuum cleaner on charge and start the reset procedure right away, and sometimes it helps shake the system.

Another common error is "Device is busy," which means that the server can't break the connection because it thinks the device is active. Wait 10-15 minutes, turn off the router and try to delete from the application again, and switching the mobile Internet to Wi-Fi and vice versa also helps.

If you lose your voice packet or language after you reset, don't panic. When you first register successfully in the app, the software will automatically update and download the necessary files, and the main thing is to ensure a stable Internet connection at that point.

Failure prevention and system maintenance

To minimize the need for frequent resets, you should properly maintain the device. Regular cleaning of sensors and wheels prevents logical errors in navigation. A vacuum cleaner that can not drive normally often begins to emit errors that users mistake for a software glitch.

Remember to update your firmware in a timely manner. Xiaomi engineers are constantly releasing patches that fix connectivity bugs and improve algorithms. Automatic updates can be enabled in the app settings so you don't have to think about it manually.

It is also recommended to periodically, every few months, do a preventive reset of Wi-Fi settings if you change equipment in the house, which helps to avoid accumulation of “junk” profiles in the memory of the device and ensures a stable response rate.

• 🧹 Clean the sensors and wheels once a week.
• 🔄 Check for updates monthly.
• 🌐 Do not change the name of your Wi-Fi network without needing to.
• 🔋 Do not allow a deep discharge of the battery during storage.

⚠️ Warning: Never wash the body of a robot vacuum cleaner with water, especially the top panel with buttons and sensors. moisture inside the housing is the main cause of irreversible electronic failures that cannot be corrected by resetting.

💡

Regular maintenance of mechanical parts of the device reduces the likelihood of software errors by 80%, making a complete resetting of settings an extreme measure, not a regular measure.

Frequently Asked Questions (FAQ)