Xiaomi Redmi smartphones are famous for their availability and reliability, but even they can encounter software errors over time.The Redmi 7A model, released in 2019, is still popular due to its capacious battery and stable MIUI system. However, the accumulation of temporary files, the installation of poor-quality applications or system failures can lead to a slowdown of the device.
In these situations, the only solution is often to go back to the original state completely, and resetting deletes all user data, returning the phone to the state it was in when you bought it, a radical but effective method that eliminates a lot of software problems without going to the service center.
Before you take action, you need to be clear that this process is irreversible, that all your photos, contacts, correspondence and installed programs will be destroyed, so it is extremely important to take care of important information in advance so that it does not lose it forever.
Preparation of the device for the discharge procedure
The first and most critical step is to back up your data. The Android operating system that runs MIUI doesn't have a built-in recycle bin from which to recover deleted files after a hard reset, and you need to manually copy important documents, photos and videos to your computer or to the cloud.
Also worth paying attention to is the battery level. The process of formatting internal memory and reinstalling system files can take anywhere from 10 to 30 minutes. If the phone turns off in the middle, it can damage the bootloader. Make sure the battery is at least 50-60% charged.
- 📸 Back up your contacts to your Google account or export them to a.vcf file.
- ☁️ Check sync gallery with Google Photos or Xiaomi Cloud.
- 🔋 Connect the device to the charger or make sure the charge level is high.
- 🔒 Remember the password from the Google account that was used on the phone (protection) FRP).
Another important thing is that Google's account is uncoupled, and modern versions of Android have FRP protection, and if you reset your phone without deleting your account through the settings menu, the next time you turn on, you'll need to enter your password from your last synchronized account, and you won't be able to activate your device without that data.
☑️ Redmi Preparation 7A dump
Reset via the MIUI settings menu
The easiest and safest way to bring the Xiaomi Redmi 7A back to factory settings is to use the system’s built-in menu, which is suitable for cases where the phone is turned on, the screen responds to touch, and you have access to the desktop.
To start, go to the main app menu and find the Settings icon. In the options list that opens, you need to scroll down to About Phone. This is where the basic device information and system management tools are located. In some versions of MIUI, this item may be simply called About Device.
Inside the About Phone menu, find the Reset line, which is usually at the bottom of the list, and if you click on it, you'll see two options: Reset (only system settings will return) and Erase everything (complete reset), and we need the second option for a complete cleanup.
⚠️ Warning: If the phone has a lock screen (pattern lock, PIN-code or password, the system will require you to enter it before the reset procedure, a security measure that prevents the deletion of data by unauthorized persons.
Once confirmed, the phone may ask you to enter the password for your Mi Account if it is tied, which is anti-theft protection, and after successful authorization, the preparation process will begin, which will take a few seconds, after which the device will restart and begin deleting data.
- 📱 Open the settings on the desktop.
- 📲 Go to the About Phone section.
- 🗑️ Select the Reset option at the bottom of the screen.
- ✅ Click the Erase Everything button and confirm the action.
It's important not to interrupt the process or press control buttons until the phone is fully rebooted. The screen can go out and light up several times - this is normal behavior of the system when formatting memory partitions.
💡
Before resetting through the settings menu, it is recommended to remove SIM-microSD card and memory card so that you don’t accidentally format external storage with important data.
Hard Reset via Recovery Mode
If the smartphone is frozen, does not respond to touch or does not load to the desktop, the standard method through settings will not work. In this case, a recovery mode known as Recovery Mode is used. On Redmi 7A, this mode is entered by a combination of physical buttons.
To enter recovery mode, you need to turn the device off completely. If the phone freezes and doesn't turn off in the usual way, press the power button for 10-15 seconds until the screen goes out. Then simultaneously press the Volume Up and Power buttons.
Hold both buttons until the Mi logo appears, and then the power button can be released while holding the volume button. In a few seconds, the Main Menu menu with the English interface will open, the volume buttons (up/down) control it, and the power button will select it.
The sequence of entry into Recovery:
1. Turn off the phone.
2. Clutch Volume Up + Nutrition.
3. Hold until the Mi logo appears.
4. Let go of Meals, keep Volume Up until the menu appears.In the menu that opens, select Wipe Data. The system will alert you that all data will be deleted. Select Wipe All Data and confirm the action by selecting Confirm. After the process is complete, click Back to Main Menu, then Reboot and Reboot to System.
⚠️ Attention: In Recovery mode, the touch screen is not working. All actions are performed exclusively with physical volume and power buttons.
The first download after a hard reset through the recovery can last longer than usual - up to 5-7 minutes. Don't panic if the Android or Mi logo is hanging on the screen for a long time, the system conducts initial optimization of applications.
What to do if the Recovery menu does not open?
Deleting Google Account and Protecting FRP
One of the most common problems after a reset is Factory Reset Protection (FRP), a feature that is embedded in Android to protect the owner’s data in the event of a phone theft. If a Google account is added to the Redmi 7A, the system remembers it.
When you try to set up your phone after a reset, the system will require you to enter a password from the account that was synced last, and if you forget your password or don't have access to your email, it will be extremely difficult to restore access to the device, often requiring expert intervention or complex workarounds.
To avoid this situation, before resetting (if you have access to the menu), follow the following steps: Go to Settings → Accounts and Sync (or just Accounts). Find your Google account in the list, click on it and select Delete Account or Sign Out.
| Action. | Place on the menu | The result |
|---|---|---|
| Google Deletion | Settings → Accounts | Removes FRP lockdown |
| Deleting Mi Account | Settings → Mi Account | Untie the device from the cloud |
| Resetting settings | The phone. → Reset | Clears the phone's memory |
Also remember to exit Mi Account.Although Xiaomi lock is less common than Google FRP, it also exists.In the Mi Account menu, click on the Sign Out button and enter the password for confirmation.
Post-dumping solution
After a successful return to factory settings, users may be faced with a number of questions, such as the phone may be slow in the first 30-60 minutes, this is due to the fact that MIUI background services index files and check for updates, give the device time to “overclock”.
Another common situation is the lack of internet or Wi-Fi issues. After the reset, not only the data, but also some network configurations are reset. Make sure the date and time are set correctly, as the wrong time can block the connection to Google's secure servers.
If the phone continues to warm or discharge quickly after reset, check the list of installed applications. Perhaps some application has automatically installed from the backup and causes conflict, in which case selective installation of programs will help.
- 🌡️ Give your phone 1 hour of work without active actions for background optimization.
- 📅 Check the correct setting of date and time.
- 📶 Reconnect to the Wi-Fi network by re-entering the password.
- 🔄 Check for system updates in the About Phone menu.
In rare cases, a reset may be required if the first procedure went wrong due to a power failure or file system error.If problems persist after the second reset, a hardware malfunction is likely.
💡
The normal operation of the smartphone after reset is restored during the first hour of active use, until the system completes the background optimization processes.