How to reset Xiaomi Redmi Note 7 to factory settings: all ways with photos

Xiaomi Redmi Note 7 remains one of the most popular budget smartphones even years after its release. But over time, any gadget begins to “brake”, glitch or simply requires a “clean start” before selling. Hard reset solves most software problems, but the Redmi Note 7 has nuances: from locking after reset to the features of working with MIUI Recovery.

This article includes three proven reset methods (including the brick method), unique Redmi Note 7 error codes after hard reset and instructions on how to avoid blocking your Mi Account, and a method comparison table and answers to frequent questions that are not covered even on official Xiaomi forums.

When you need to reset to factory settings

Resetting is not a panacea, but it helps bring your smartphone back to life in 80% of cases without going to the service.

• 🐢 The phone hangs on the Redmi logo or reboots cyclically (bootloop).
• 📱 Applications are spontaneously closed, and the system writes “Com.android.phone has stopped working».
• 🔒 Forgot the pattern lock or PIN-Find My Device is not helpful.
• 📲 Before selling or transferring your phone – to delete all data irrevocably.
• 🔄 After a failed update MIUI (For example, 12 to 13 version).

But there are contraindications:

• ⚡ If the phone does not turn on at all (no vibration, charging indication) - the problem is in the hardware, not in the software.
• 💾 In case of physical memory damage (for example, after a fall), resetting can make things worse.

⚠️ Attention: On the Redmi Note 7 with MIUI 12.5+ After reset, you may need to enter the data of the Mi Account, previously associated. If you do not remember the password, unlocking is possible only through the official Xiaomi service (cost from 1500). ₽).

Method 1: Reset via phone settings (the safest)

This method works if the phone turns on and you remember the pattern lock/PIN. It is suitable for a “soft” reboot of the system without the risk of locking.

Instructions:

1. Tap 7 times on the MIUI version to activate the developer mode (you will be notified “You became a developer”).

It takes 5-10 minutes, and the phone will reboot and suggest that you set it up as new.

Save photos and contacts to the cloud|Remember the username/password from Mi Account|Get out. SIM-memory-card|Charge your phone at least 50 times%-->

⚠️ Note: If Redmi Note 7 is enabled with Device Protection (Settings) → Lockdown and protection → Device protection, after reset, the phone will require you to enter a password from the last Google account associated with the device!

Method 2: Hard Reset with Recovery Mode (if the phone doesn't boot)

If the Redmi Note 7 is stuck on the logo or doesn't respond to touch, resetting through Recovery mode will help, which removes all data, including viruses and corrupted system files.

Step-by-step:

1. Turn off the phone (press the power button for 10 seconds).
2. Press the Power + Volume buttons up at the same time and hold for 10-15 seconds until the Mi logo appears.
3. Release the buttons and you will see the MIUI Recovery menu (English or Chinese).
4. With volume buttons, select Wipe Data (or ), confirm the choice with the power button.
5. Then select Wipe All Data and confirm the action.
6. After the process is complete, press Reboot.

If the menu is in Chinese, focus on the position of the items (see the table below).

If after reset, the phone asks for a Mi Account password, and you do not remember it - see the section "What to do if after reset the phone is blocked."

Method 3: Fastboot Reset (for power users)

This method is needed if:

• 🔧 Recovery Mode does not open.
• 📱 Phone 'bricked' after failed firmware.
• 🔒 You need to bypass the Mi Account lock (but it violates Xiaomi’s rules!).

The work will require:

• 🖥️ Windows computer 10/11.
• 🔌 Cable USB Type-C (original!).
• 📦 Mi Flash Tool (download from the official website).
• 📄 Firmware for Redmi Note 7 (codename lavender).

Instructions:

1. Turn off the phone.
2. Press Power + Volume down for 10 seconds - the phone will go to Fastboot mode (a hare will appear in a hat-eared).
3. Connect the phone to the PC.
4. Launch the Mi Flash Tool, press Select and point the path to the unpacked firmware.
5. Press Refresh – the program must detect the device.
6. Select Clean All mode and press Flash.

⚠️ Attention: Continuous power is critical! If your phone disconnects from your PC while you're running through Fastboot, it can turn into a brick. Use the back. USB-The computer port (not the hub!) and the original cable.

💡

If the Mi Flash Tool doesn’t see the phone, install the Qualcomm HS-USB QDLoader 9008 drivers manually through Windows Device Manager. You can download the driver on XDA Developers (look for the Redmi Note 7 theme).

What to do if the phone is blocked after resetting

The Redmi Note 7 with MIUI 11+ may have a window after a reset that requires you to enter Mi Account data, which is anti-theft protection, and you can't legally circumvent it.

• 🔑 If you remember the login / password - enter them and confirm through SMS/email.
• 📧 If you do not remember the password, restore it on the Mi Account website (you will need access to the mail or phone associated with the account).
• 🛠️ If your account is not yours (phone bought by hand) - contact the Xiaomi service center with a check about the purchase. ₽.

Illegal bypassing practices (via EDL or flashing) violate Xiaomi’s user agreement and may result in:

• 🚫 Blocking IMEI (The phone will become a brick without a network).
• 🔍 Loss of warranty.
• 💸 Fine up to 50,000 ₽ for “hacking” protection (under Art. 272 of the Criminal Code of the Russian Federation).

💡

The only legal way to unlock the Redmi Note 7 after a reset is to recall Mi Account data or contact the official service.All other methods are risky and may violate the law.

Mistakes after resetting and how to fix them

Even after a successful reset, the Redmi Note 7 may not work properly.

If after resetting the phone does not turn on at all (no vibration, indication), check:

• 🔋 Battery: Connect to charging for 1 hour - if the indicator does not burn, the power board may be damaged.
• 🔌 Cable and Power Unit: Try another cable (preferably the original Xiaomi) 18W).
• 🛠️ Power button: if the phone fell, the button plume could move away (need analysis).

FAQ: Frequent questions about the Redmi Note 7 reset

If your question is not covered in the FAQ, check the official Xiaomi forum or ask a question in the comments (specify the phone model and MIUI version).