Smart home is convenient, but sometimes the technology begins to behave unpredictable, requiring user intervention. Resetting is often the only right solution when the gadget stops responding to commands or does not want to connect to a new Wi-Fi network. owners of lighting from Xiaomi face similar situations quite often, especially when changing routers or providers.
In this article, we will discuss in detail how to correctly perform Hard Reset for the Mi Bedside Lamp 2 model to return the device to the factory state. The recovery process does not require special tools, but it is important to follow the sequence of actions to avoid starting an unnecessary pairing mode.
We will look at the standard methods through the control button, and also touch on the software methods of resetting through the mobile application, understanding these mechanisms will help you quickly reanimate the device and enjoy the automation of lighting in your apartment again.
When a complete reset of the device is required
The main reason owners are looking for information on how to reset the lamp is because of network connectivity issues. If you change your Wi-Fi, router, or SSID password, Xiaomi’s smart light won’t automatically reconnect, in which case cleaning the device’s memory from old network profiles is a must before you reset.
The procedure is also required when transferring the device to another user, so that the new owner can link the lamp to his Mi Home account, the previous data must be completely deleted, ignoring this step will lead to the error "Device has already been added", which will block the ability to control.
There are rarer cases, such as software failures, where the lamp stops responding to touch or changes colors chaotically, in which holding the button for 10 seconds can reboot the controller and eliminate the software glitch.
- 🔄 Change of Internet Service Provider or Router Settings.
- 🏠 Selling or donating a lamp to a new owner.
- 🐛 Unstable work, hangings or errors in work LED-module.
- 📱 The need to transfer the device to another region in the application.
⚠️ Warning: Before performing a reset, make sure the lamp is connected to a power source. interruption of the recovery process may damage the firmware.
Preparation for the restoration of factory settings
Before you start the action, you need to make sure that the equipment is ready for the procedure. Physical access to the device is mandatory, since software reset is not always possible if the lamp is already in error.
It's important to understand the difference between shutting down and resetting. Just disconnecting the lamp from the network is not enough, it'll just reboot the system, but it won't clean the configuration file. We need to initiate a special mode that is built into the logic of how the Xiaomi controller works.
It's also a good idea to check the firmware version if you have the ability to connect the device. Sometimes the connection problems are solved by an update and the reset may not be necessary. However, if the lamp is offline, the update is not possible, and returning to the original state is the only way out.
Make sure your smartphone is nearby with the Mi Home app installed. Although the reset itself is mechanical, you will need the app to further set up immediately after the cleaning procedure is completed.
Mechanical reset via control button
The most reliable and quickest way to bring the Mi Bedside Lamp 2 back to factory status is to use a touch button, which works whether the lamp is connected to the network or not, since the command is processed by a local controller.
To start, tap the switch to activate the light. The lamp should light up. If it doesn't respond to touch, try briefly pressing the button again, perhaps the device is in nightlight or standby mode.
Then you do a key action: press the switch and hold your finger for 10 seconds. Don't release the button until you see the visual indication. Usually at this point, the lamp starts flashing yellow or orange, which signals the transition to pairing and resetting mode.
☑️ Pre-reset check
Once the light flashes, release the button, the device automatically restarts and clears the stored Wi-Fi data, and the lamp is now ready to search for a new network.
What to do if the lamp does not flash?
Reset via the Mi Home mobile app
If the lamp is still displayed in the Mi Home app as an online device, you can perform a reset programmatically.This is handy when physical access to the button is difficult or you want to remove the device from the list cleanly and neatly.
Open the app on your smartphone and find your Mi Bedside Lamp 2 card. Click on the three dots in the upper right corner or go to your device settings. In the menu that opens, scroll down to the General Settings section.
You'll find "Delete Device" or "Unbind" on that button, and in most cases, it will also trigger a reset of the network settings inside the gadget itself, putting it in a standby mode.
| Action. | The result | The need for Wi-Fi |
|---|---|---|
| Removal from Mi Home | Account untied | Required. |
| Holding the button (10 seconds) | Resetting Wi-Fi settings | Not required |
| Power outage | Reboot. | Not required |
It is important to note that simply removing from an application does not always guarantee a full Hard Reset of the device itself, especially if there have been synchronization failures. Therefore, the combination "Delete in App + Reset button" is considered the most reliable.
Adjusting the lamp after resetting
Once the reset procedure is successfully performed, the lamp will go to standby mode, the indicator will flash slowly, informing you that it is ready to pair, and now you need to open the Mi Home application and press the add button of the new device.
The app will automatically detect the lamp if your smartphone is connected to the same 2.4GHz Wi-Fi network. Follow the instructions on the screen: enter the password from your wireless network and wait for the setup to be completed.
💡
Use a 2.4GHz Wi-Fi network to set up. Xiaomi lamps often don't see a 5GHz network during initial pairing.
If the automatic search fails, select the device from the list manually. the application will prompt you to confirm that the indicator is flashing. After a successful connection, it is recommended to immediately check for firmware updates in the device settings menu.
⚠️ Warning: Make sure you have Bluetooth enabled and geolocation enabled when setting up, this is necessary for the discovery protocol to work in the Mi Home app.
Solving Connection Problems
Even after the correct reset, it can be difficult. Often the problem lies in a router that blocks new devices or gives out addresses too slowly. Try rebooting the router before setting up the lamp.
Another common mistake is using complex passwords with special characters in Wi-Fi. Some older versions of firmware's Xiaomi smart devices mishandle certain characters. Try temporarily simplifying the password.
If the lamp never goes into pairing mode after all the manipulations, a deeper reset may be required. Try turning the lamp on and off 5 times in a row with quick presses, and then pressing the button. This method sometimes helps to get out of the deep freeze state.
💡
A stable 2.4 GHz connection and the smartphone’s proximity to the lamp are key factors in successful setup after resetting.
In rare cases, changing the region in the application helps. If you chose Russia, try switching to China or Europe, as servers can handle connection requests differently.