Buttons on Xiaomi devices — whether physical keys on a smartphone, touchpads on a TV or mechanical switches in smart gadgets — sometimes start to malfunction. This can manifest as getting stuck, double tapping, lack of response, or activation of the wrong functions. The reasons are varied: from software errors to updates MIUI In most cases, the problem can be solved without going to the service center, just reset the button or return it to the factory parameters.
It is important to understand that by “resetting a button” users often mean different procedures:
- 🔄 Software reset – return of the button functionality to the standard settings through the device menu.
- 🛠️ Hardware reset – physical disabling/connecting of the button (relevant for modular devices).
- 📱 Reset via Recovery Mode – Used for system failures when buttons don’t respond.
- 🔧 Calibration – adjusting the sensitivity of touch or mechanical buttons.
In this article, we will analyze all the ways of resetting for different types of Xiaomi devices, from Redmi smartphones and other devices. POCO before Mi TVs TV And Yeelight smart lamps, and we're going to focus on the hidden functions. MIUI, which allow you to reset button settings without losing data.
1. Reset buttons on Xiaomi smartphones (Redmi, POCO, Mi)
On Xiaomi smartphones, buttons can “glue” after a firmware update, device drop or prolonged use.
- 🔘 Power button (hang, double pressing).
- 🔊 Volume buttons (incorrect adjustment, spontaneous change of level).
- 📍 Knob. Bixby/Google Assistant (on some models).
Before you start resetting, check if the failure is due to contamination of the connectors or damage to the plume.
- Turn off your smartphone.
- Use a spray of compressed air to blow the area around the buttons.
- Press the buttons 10-15 times carefully, sometimes it helps to “develop” the mechanism.
If mechanical cleaning does not help, go to software methods.
Method 1: Resetting through settings MIUI (data-free)
This method is suitable for resetting touch button settings (such as navigation at the bottom of the screen) or reassigning physical keys.
Check the battery charge (minimum 30%)
Make a backup copy of important data
Remember the current button settings (take pictures)
Disconnect the device from charging-->
- Go to Settings → System and device → Buttons and gestures.
- Select the button settings section (on some firmwares – Physical buttons).
- Click Reset button settings or Restore default values.
- Confirm the action by entering the unlock password (if required).
After restarting, the buttons should work as standard. If the problem persists, try the following method.
Method 2: Reset via Recovery mode (in case of system failures)
If the buttons don’t respond at all or the smartphone is stuck on the Mi logo, you will need a hard reset via Recovery Mode, which will delete all data, so use it only as a last resort.
⚠️ Note: On devices with a bootloader, a reset via Recovery may result in activation of Anti-Rollback protection.Be sure to back up your data and access the Mi Account associated with the phone before the procedure.
- Turn off your smartphone.
- Press the Power Button + Volume combination upwards for 10-15 seconds until the Mi logo appears.
- From the Recovery menu, select Wipe Data → Wipe All Data (use volume buttons for navigation, power button for confirmation).
- After the process is complete, select Reboot → Reboot to System.
If the buttons still don't work after reset, the problem may be in the hardware (damaged the plume or the controller chip).
What if your smartphone is not included in Recovery?
2. Reset buttons on Xiaomi TVs (Mi) TV, Redmi TV)
On Xiaomi TVs, the buttons can be both physical (on the remote or the case) and touch (on some models), most often users face the following problems:
- 🎮 Remote buttons do not respond or work with a delay.
- 🔄 Touch buttons on the body are triggered spontaneously.
- 🔊 Volume buttons “stick” (for example, the sound increases to a maximum).
Unlike smartphones, Xiaomi TVs don’t have a built-in button reset feature through menus, but there are several effective ways to make them work again.
Method 1: Reconnecting the remote control
If the problem is only with the remote, reset it:
- Remove the batteries from the remote for 30 seconds.
- Press and hold any remote button for 10 seconds (discharge the residual charge of the capacitors).
- Put the batteries back in.
- Point the remote to the TV and press Menu + OK 5 seconds at the same time to reconnect.
If the remote still doesn’t work, try connecting it via the Mi Remote app (available for Android and iOS).
Method 2: Reset the TV to factory settings
If the buttons on the TV body fail, perform a complete reset:
- Go to Settings → Device → Reset and Update → Reset settings.
- Enter. PIN-code (default 0000 or 1234).
- Confirm the reset and wait for the reset.
⚠️ Note: On Xiaomi TVs with PatchWall firmware, the reset can take up to 10 minutes. Do not turn off the power during the process - this will damage the system files and require flashing through the system. USB.
After reset, check the buttons. If the problem persists, the infrared receiver (for the remote) or the touchpad (for the buttons on the case) may have malfunctioned.
3. Reset buttons on Xiaomi smart devices (lamps, sockets, speakers)
Xiaomi smart gadgets (such as Yeelight lamps, Mi Smart Plug sockets or Mi speakers) AI Speaker) are often equipped with manual manual manual or touch buttons. If the button has stopped responding, try the following methods.
Method 1: Soft reset (reset)
Most Xiaomi smart devices support reboot via the long push of a button:
- 💡 For Yeelight lamps: Hold the switch on 5-7 seconds until the light blinks 3 times.
- 🔌 For Mi Smart Plug outlets: press and hold the 10 seconds button (the indicator flashes red).
- 🎤 For Mi columns AI Speaker: Press the Mute button for 5 seconds.
After restarting, the device will automatically connect to the Wi-Fi network (if previously configured).
Method 2: Hard reset (return to factory settings)
If the soft reset does not help, perform a full reset:
| The device | Reset combination | Sign of successful discharge |
|---|---|---|
| Yeelight LED | Hold the button for 10 seconds (5 times flash) | The lamp will go into flashing white light mode |
| Mi Smart Plug | Hold the button for 15 seconds | The indicator will light up green. |
| Mi AI Speaker | Clip the Mute. + Volume Up 10sec. | Sound signal and voice message |
| Mi Robot Vacuum | Hold Home. + Power 5 seconds | Sound signal and Wi-Fi reset |
After a hard reset, the device will lose all settings, including the Wi-Fi connection and binding to the Mi Home account.
💡
If a Xiaomi smart device doesn't reset through a button, try turning it off power for 1 minute, then plug it back in. Sometimes this helps wake up the controller.
4.Reset buttons on Xiaomi fitness bracelets and watches (Mi Band, Mi Watch)
On Xiaomi wearables (such as Mi Band) 6/7 The button may stop responding due to software failure or mechanical damage. Unlike smartphones, there is no setup menu for resetting - only hardware methods.
Method 1: Forced resetting
For most wristbands and watches, Xiaomi has a universal method:
- Connect the device to the charger.
- Hold the touch button (or physical key) for 20-30 seconds.
- Wait for the vibration or the appearance of the Mi logo.
If the device does not respond, try the second method.
Method 2: Reset via the Mi Fitness app
To reset the button settings (for example, if it is reassigned to an incorrect function):
- Open the Mi Fitness app (or Zepp for new models).
- Go to the section of your device.
- Select Settings → Resetting settings → Resetting the button.
- Confirm the action.
⚠️ Note: Mi Band 7 Pro and Mi Watch S1 Resetting a button through the application can result in resetting all user activity profiles.
If the button still doesn't work, check for mechanical damage, for example, on the Mi Band, the touchpad often fails due to moisture, in which case you will need to replace the module.
5. Reset buttons on Xiaomi routers (Mi Router, AiO)
On Xiaomi routers (for example, Mi Router) 4A or AX3600) The Reset button is used to reset the factory settings. If the button doesn't respond, it may be due to a problem:
- 🔌 Contamination of contacts (dust, oxidation).
- 🛠️ Mechanical wear (button recessed or broken).
- ⚡ Software failure (router does not respond to presses).
Method 1: Standard discharge
To return the router to factory settings:
- Put the router on the network.
- Find the Reset button (usually located on the back in the recess).
- Use a paper clip or toothpick to press and hold the button for 10-15 seconds.
- Release the button when the indicators start flashing chaotically.
Once reset, the router will automatically restart. Connect to the MiWiFi network (the password is indicated on the sticker) and configure it again.
Method 2: Reset via web interface
If the Reset button does not work, but the router turns on:
- Connect to the router via Wi-Fi or cable.
- Open your browser and go to 192.168.31.1.
- Sign in (the default login and password is usually admin).
- Go to Advanced. → System → Reset.
- Select Restore Factory Settings and confirm.
⚠️ Attention: On Xiaomi routers with MiWiFi firmware ROM Reset via the web interface may not work if the device is locked after unsuccessful password attempts. In this case, use hardware reset (method 1).
6. Frequent button reset errors and how to avoid them
Many users make mistakes that make the reset procedure more difficult or lead to additional problems, and the most common ones are:
| Mistake. | Effects of consequences | How to avoid |
|---|---|---|
| Reset without backup | Loss of data, settings, accounts | Always create a backup through Settings → Additionally. → Backup |
| Use of informal firmware | Blocking buttons, loss of warranty | Download the software only from the official Xiaomi website |
| Interruption of the discharge process | "Briqueting" of the device (excluding) | Do not turn off the power until the reset is complete. |
| Reset via Fastboot without unlocking the bootloader | Device lock (Mi Account authorization required) | Check the status of the bootloader through fastboot oem device-info |
Another common mistake is to try to reset buttons on devices with damaged batteries, where if the battery is inflated or does not hold charge, it can block the buttons (especially the power buttons), in which case, first replace the battery, and then reset.
💡
If the button still doesn't work after reset, the problem is 90% hardware. Don't waste time on software methods, call the service center.
7. Alternative ways to control if the button does not work
While you are waiting for a button to be repaired or replaced, you can use alternative device management methods:
For smartphones:
- 🖥️ Control via PC: connect the phone to USB and use Mi. PC Suite or adb for emulation of presses.
- 👆 Gestures: Turn on Settings → Special facilities → Gesture management.
- 🔗 Bluetooth remote: connect the game controller or keyboard via Bluetooth.
For TVs:
- 📱 Mi Remote app: control TV from your smartphone.
- 🖱️ USB-Mouse: Connect the mouse to the port USB television.
- 🎮 Gamepad: some models support the connection of Xbox or PlayStation controllers.
For smart devices:
- 📲 Voice Assistant: Use commands for Alice, Google Assistant or Siri.
- ⚙️ Automation: Configure scripts in Mi Home to control without buttons.
These methods will help to temporarily solve the problem, but will not replace a full-fledged repair.