How to Reset Xiaomi Poco X3 NFC to Factory Settings: The Complete Guide

Resetting the Xiaomi Poco X3 NFC to factory settings is a procedure that can solve most software problems, from slowdowns and errors to the inability to unlock the screen. However, not all users know that there are three fundamentally different reset methods, each of which is suitable for specific situations. For example, if a smartphone does not respond to touch or is locked with a graphical key, a standard reset through the settings will not help - you will need to download to Recovery Mode.

In this article, we will discuss all the ways, including hidden nuances that the manufacturer does not always mention in the official instructions, you will learn how to save important data before resetting, what to do if Poco X3 NFC requires a password from your Mi Account after the procedure, and how to avoid common errors, and we will pay special attention to alternative methods for cases where the phone does not turn on or hovers on the logo. POCO.

⚠️ Important: Reset deletes all data, including photos, contacts and installed apps, if they are not synced to the cloud. Even if you previously backed up through Mi Cloud, some settings (such as camera or sound settings) will have to be reconfigured.

1.Resetting preparation: what to do in advance

Before you start resetting, make sure you follow all the critical steps. Many users experience problems after the procedure precisely because of neglect of preparation.

First, check the battery level. If it's below 30 percent, connect your smartphone to charge. Interrupting the discharge process can cause the device to fail. Second, remove the memory card (if it's installed) -- sometimes the reset will format it.

• 🔋 Battery charge: at least 30% (optimum - 50%+).
• 📱 Data Sync: Check that contacts, photos and notes are saved in Mi Cloud or Google Account.
• 🔐 Password from Mi Account: Write it down – after the reset, you may need confirmation.
• 📡 Stable Wi-Fi connection (if you plan to reset via settings).

If you use two-factor authentication in Mi Account, make sure you have access to a backup code or a linked phone number. After a reset, the system can request confirmation of account ownership, and without that, it will be impossible to unlock the Poco X3 NFC.

💡

If you forget your Mi Account password, restore it to reset. After the procedure, it will be more difficult to do this - you will need a confirmation via SMS or email, which may not be accessed on the dropped phone.

2. Method 1: Reset via the settings menu (the easiest)

This method is suitable if the smartphone is turned on, reacts to touch, and you remember the pattern lock or PIN-The procedure takes no more than 5 minutes and requires no additional tools.

Open the Settings app and go down the path: Settings → About Phone → Resetting → Delete all data.

On some versions of MIUI, the path may be slightly different, for example:

Settings → Additional → Recovery and Reset → Resetting settings

• 📱 Click Delete all data (reset to factory settings).
• 🔐 Enter the current pattern lock, PIN Password (if requested).
• ⚠️ Confirm the action by choosing to erase everything.
• ⏳ Wait for the process to be completed (the phone will reboot automatically).

After the reboot, you will be asked to configure the Poco X3 NFC as a new device. If you previously had a Mi Account tied, the system can request a username and password to confirm ownership.

Make sure your phone is 30%+ charged

Sync data with Mi Cloud/Google

Remember the password from Mi Account

Disable the memory card (if any)

Connect to Wi-Fi for quick setup after reset-->

3. Method 2: Reset via Recovery Mode (if the phone is not turned on)

If the Poco X3 NFC doesn't respond to touch, hovers on the logo or is locked with a pattern lock you forgot, a reset via Recovery Mode will help.This mode lets you control your phone using physical buttons.

To enter Recovery, follow the following steps:

1. Turn off the phone (press the power button for 10-15 seconds if it freezes).
2. Press the power button and the volume button at the same time.
3. Hold them until the MI logo appears (usually 5-10 seconds).
4. Release the buttons when the Recovery menu appears (English or Chinese).

In the Recovery menu, you can control the volume buttons (Up/Down for navigation) and the power button (Select).Look for Wipe Data (or in the Chinese version) and confirm the action.

⚠️ Note: In some versions MIUI After resetting via Recovery, you may need to enter a password from Mi Account, even if the account was not previously linked).

Method 3: Reset via Fastboot (for power users)

This method requires a computer and is used in extreme cases where:

• The phone doesn’t even come on in Recovery Mode.
• Resetting through menu or Recovery didn't help.
• You need to remove the binding to the Mi Account (if you forget the password).

The work will require:

• 💻 Computer with Windows/macOS/Linux.
• 🔌 Cable USB Type-C (original or quality).
• 🛠️ Mi Flash Tool (download from the official website).
• 📥 Poco firmware X3 NFC (The version must be the same as the current version).

Instructions:

1. Turn off the phone.
2. Press the power button + volume down before the Fastboot logo appears (a robot labeled Fastboot Mode).
3. Connect the phone to the computer.
4. Launch the Mi Flash Tool, select the downloaded firmware and press Refresh (should appear) COM-port).
5. Press Flash and wait until it is completed (the process will take 5-10 minutes).

⚠️ Warning: Incorrect firmware or interruption of the process can turn the phone into a brick.If you are not sure about your actions, contact the service center.

Through the settings menu

Through Recovery Mode

Through Fastboot.

Never dropped it.

Another way.-->

5 What to do if after resetting the phone requires a password from Mi Account

The Mi Cloud Lock feature can lock the phone even after a reset if the Mi Account was previously tied.This is Xiaomi's standard security measure, but it often causes problems for legitimate owners who have forgotten the password.

Here's what we can do:

• 🔑 Enter the account that was linked before the reset. If you don't remember the password, restore it to account.xiaomi.com.
• 📧 If recovery is to be achieved email/SMS If it doesn’t work, try alternative methods (e.g., confirmation via backup email or linked number).
• 🛠️ If your account is not yours (for example, a phone is bought with hands), contact the previous owner for data or provide him with a check to untie the device through Xiaomi support.

If neither of these methods worked, there are two options:

1. Contact the Xiaomi service center with documents on the phone (guarantee or check).
2. Use informal unlock methods (e.g. via EDL Mode), but this requires special equipment and may void the warranty.

💡

If you buy the Poco X3 NFC from hand, be sure to check if it is untied from the previous Mi Account.Otherwise, after a reset, the phone may be locked.

6. Frequent mistakes and how to avoid them

Even experienced users sometimes make mistakes when resetting Xiaomi Poco X3 NFC. Here are the most common ones and ways to prevent them:

Another common problem is the loss of IMEI after a Fastboot reset, which can occur if the firmware has been damaged or is incompatible with the model, and to restore the IMEI, you need to:

1. Download QCN Rebuilder or Maui META.
2. Restore backup copy NV-section (if it was made before the discharge).
3. Contact the service center if you do not have experience with engineering menus.

7. Alternative methods: when the discharge does not help

If there are problems after reset (for example, the phone still brakes or does not turn on), perhaps the cause lies deeper:

• 🔋 Battery wear: If the battery swells or loses capacity, the phone can spontaneously shut down.
• 🛠️ Damage to the motherboard: If the smartphone fell or came into contact with water, the power controller or memory could fail.
• 📱 Incompatible firmware: If you have flashed your phone in unofficial builds, some features may not work properly.

In such cases, it is recommended that:

1. Test your phone with diagnostic codes: ##4636## - battery and network information ##6484### - camera and sensor test
2. Install official firmware via the Mi Flash Tool (select the Stable version, not the Developer version).
3. Contact the service center for the diagnosis of iron.

FAQ: Answers to Frequent Questions