Reset Xiaomi Redmi Go to factory settings: 3 working ways

Why a factory reset may be necessary

Xiaomi Redmi Go is a budget Android Go Edition device optimized for smooth operation on weak hardware. However, even such a model eventually begins to slow down, glitch or refuse to turn on. Hard reset helps solve most software problems, but it is important to understand when it is really necessary.

The main reasons for resetting are: system freezes, persistent application errors, virus infection, or preparing the phone for sale. For example, if after updating MIUI the device began to spontaneously restart, and the rollback through Settings → System → Software update did not help – reset is often the only way out. But remember: this procedure completely removes all data from internal memory, including photos, contacts and installed applications.

Before you start, check if there are problems with memory or application conflict. Sometimes it is enough to clear the cache through Settings → Applications → Application Management or delete unnecessary files. If the phone does not respond to the on button at all, you will have to use hardware methods (we will discuss them below).

Preparing for resetting: what to do before the start

Even if your Redmi Go is malfunctioning, try to follow a few critical steps that will save you nerves and time after resetting.

• 📱 Back up. Use the settings. → Additionally. → Backup and reset → Local backup or third-party services like Google Drive. Especially important to save: Contacts (export to.vcf) Photos and videos (copy to PC or cloud) SMS and call logs (applications like.vcf) SMS Backup & Restore)
• 🔋 Charge the battery to at least 50%. Resetting at low charge can cause permanent firmware damage.
• 📋 Record your Mi Account details. After reset, you will need authorization, and if you forget the password, the phone can be locked forever (due to Mi Cloud Lock).
• 🔌 Prepare the cable. USB (If you are planning to reset via PC, a standard Micro-USB is suitable for Redmi Go.

⚠️ Note: If you forget your Mi Account, a reset via Recovery or Fastboot will result in activation of the protection. FRP (Factory Reset Protection: In this case, it will be impossible to unlock the phone without the original password.

Method 1: Reset via the settings menu (the easiest one)

If Redmi Go is turned on and reacts to touch, use this method. It requires no additional tools and takes only 5-10 minutes.

1. Open Settings (the gear icon on the main screen).
2. Scroll down and select Additional.
3. Go to Backup and Reset.
4. Slip Settings Reset.
5. Choose to erase all data (including media files).
6. Confirm the action by entering a pattern lock or PIN-code.
7. Wait until the process is complete (the phone will reboot automatically).

Once you reboot, you'll be asked to configure your device as new, and if you previously had a Mi Account attached, you'll need to enter your username and password.

⚠️ Note: Some Redmi Go firmware may call Reset and Reset or Reset to factory. If you don't find a partition, search in the settings (the magnifier icon at the top of the screen).

Method 2: Reset via Recovery Mode (if the phone is not turned on)

If Redmi Go is stuck on the logo, reboots cyclically or doesn't respond to the screen, Recovery mode will help, which works even when the firmware is damaged, but requires precise follow-up.

1. Turn off the phone (press the power button for 10-15 seconds).
2. Press the Power button + Volume Up button at the same time.
3. Hold them for 10-15 seconds until the Mi logo and Recovery menu appear.
4. In the Recovery menu, use the volume buttons for navigation and the power button for selection.
5. Select Wipe Data (or Wipe & Reset on some versions).
6. Confirm the action by selecting Yes.
7. Once completed, select Reboot to reboot.

If the Recovery menu is in Chinese, focus on the location of the items:

• 1st item - Reboot (Reboot)
• 2nd point - Wipe Data (reset)
• 3rd item – Connect with MIAssistant (for firmware via PC)

Method 3: Fastboot Reset (for power users)

This method requires a computer and an unlocked bootloader.

• 🔄 Recovery is unavailable or damaged;
• 📱 The phone does not respond to the buttons;
• 🔧 You need to reflash the device after a failed update.

The work will require:

• Mi Flash Tool (official utility from Xiaomi)
• ADB/Fastboot drivers;
• Micro-USB cable;
• Firmware for Redmi Go (download from the official website).

1. Install Mi Flash Tool and drivers on PC.
2. Turn off the phone and put it in Fastboot mode: Press the power button + volume reduction for 10 seconds.
3. Connect Redmi Go to your computer.
4. Start the Mi Flash Tool, select the downloaded firmware (.tgz file).
5. Press Refresh – the program must detect the device.
6. Select Clean All mode and press Flash.
7. Wait for the end (10-15 minutes) and the phone will reboot automatically.

1. Reinstall drivers manually through Device Manager.

2. Use another USB-port (preferably) USB 2.0).

3. disable the antivirus (it can block the utility).-->

⚠️ Warning: Incorrect firmware through Fastboot can turn your phone into a brick. Make sure you download the firmware specifically for the Redmi Go (codename tiare). ADB: Quickboot Getvar Product Responses to the Requirement.

What to do after resetting: the initial setting

After a successful reset, Redmi Go will launch as new.

1. Choose the language and region (we recommend Russia for the correct operation of Google services).
2. Connect to the Wi-Fi network.
3. Sign in to your Mi Account (required, otherwise your phone will be locked).
4. Restore data from backup (if created).
5. Update the firmware to the latest version through Settings → Software Update.

If your phone is running slower than before, check:

• 📶 Free space (minimum required 1-2 GB).
• 🔄 Background activity of applications (turn off autoboot in Settings) → Annexes → Auto-start).
• 🛡️ Viruses (scan your device through Google Play Protection).

💡

After reset, be sure to update the firmware! Redmi Go on older versions of MIUI can slow down due to unoptimized software for weak iron.

Common mistakes and their solutions

Even with the right instructions, sometimes there are problems, so let's look at the typical scenarios and how to fix them.

If after the reset, Redmi Go does not determine SIM-map, check it out:

• 📶 Correct installation SIM (Supported by Nano-SIM + Micro-SIM).
• 📡 Network settings: Settings → SIM-maps and mobile networks → Select the network (select the Automatic mode).
• 🔄 Update of the firmware (in older versions) MIUI were modem bugs).

FAQ: Frequent questions about resetting Xiaomi Redmi Go