Forgot the password from the Mi Account and can not unlock the Xiaomi smartphone? The situation is complicated by the fact that even after resetting via Recovery, the device requires you to enter your account data - this is FRP (Factory Reset Protection). But there is a way out. In this article, we will analyze three proven methods that will help you regain access to the phone without a password, including bypassing lock on Redmi Note 10/11/12 models, POCO X3/X4/X5 and other popular lines.
It is important to understand that the reset procedure will delete all data from the device - photos, contacts, messages. If the phone is encrypted, it will be impossible to recover information after the reset. Also note that some methods require an unlocked bootloader or special tools such as the Mi Flash Tool or ADB. If you are not sure about your actions, you should contact the Xiaomi service center.
⚠️ Note: On devices with Qualcomm Snapdragon processors (most modern Xiaomi) after being reset via Fastboot or EDL You may need to log in to your Mi Account when you first turn on, and if you've been linked to your phone, you can get around that without knowing your password, it's almost impossible on firmware. MIUI 12 and newer.
1.Reset via Recovery Mode (no PC)
The easiest way is to use the built-in Recovery Menu, which is suitable if the phone is not activated FRP lock (for example, the device is not tied to the Mi Account) or you are ready to enter data after a reset. On new Xiaomi models (2022-2026), this method often does not work due to enhanced protection, but it is worth trying.
Instructions:
- 🔄 Turn off the phone with a long press of the power button (10-15 seconds).
- 🔧 Keep the combination Volume up + Power before the appearance of the Mi logo (on some models – Volume up) + Loudness down + Nutrition).
- 📱 In the Recovery menu, select Wipe Data (use volume buttons for navigation, power for confirmation).
- 🧹 Confirm the reset by choosing Wipe All Data → Confirm.
- 🔄 After completion, select Reboot. → Reboot to System.
If after rebooting the phone requires you to enter the Mi-account data, then FRP protection is activated. In this case, proceed to the following methods.
Is the phone completely off (not in sleep mode)
Is the button combination suitable for your model (see the instructions below)
Is the battery at least 30% charged?
Is there a backup of important data (reset will delete everything)
-->
On some models (e.g. Redmi 9A or POCO M3), the Recovery menu may be in Chinese.
- The first point is reboot (Reboot).
- The second is the reset (Wipe Data).
- The third is an update via ADB or Fastboot.
2.Reset via Fastboot (from PC)
If Recovery didn't help or the phone is locked in the welcome stage, try resetting via Fastboot Mode.This method requires a computer with Xiaomi drivers installed and the Mi Flash Tool utility (or fastboot from Android) SDK). Suitable for most models, including the Redmi Note 11 Pro, Xiaomi 12T, POCO F4.
Step-by-step:
- Install the drivers: 🖥️ Download the Mi Flash Tool (official Xiaomi website). 🔌 Connect your phone to your PC in Fastboot mode (hold Volume Down) + Power on-set). 🔄 In Device Manager, check that the phone is identified as Android Bootloader Interface.
- Download the firmware: 📥 Select the version of Fastboot ROM For your model at xiaomifirmwareupdater.com. 📂 Unpack the archive in a folder without Cyrillic characters (for example, C:\MiFlash\rom).
Put your phone on.
- 🛠️ Open the Mi Flash Tool, press Select and point the path to the firmware folder.
- 🔄 Select Clean All mode and press Flash.
- ⏳ Wait for completion (5-10 minutes). The phone will reboot automatically.
If after firmware the phone again requires a password from the Mi-account, then the lock is blocked. FRP I'm still active, and in that case, it'll only help. EDL-mode (see the next section) or contacting the service center with proof of possession of the device (check, box).
What to do if the Mi Flash Tool gives you a "Couldn't load device" error
3. Discharge via EDL (Emergency Mode)
EDL (Emergency Download Mode is a low-level firmware mode for the phone when other methods don't work. FRP Mi-account, but requires special equipment (EDL-cable or Deep Flash Cable or utility QFil/Mi Flash with authorization. This method is suitable for experienced users or service centers.
How it works:
- 🔌 The phone is connected to the PC in mode EDL (usually through the closure of contacts on the board or a special cable).
- 📥 The computer runs firmware through the Mi Flash Tool with a file selection prog_emmc_firehose.mbn (for Qualcomm processors).
- 🔄 The firmware overwrites all memory partitions, including Mi Account data and FRP.
For self-use of EDL will require:
- Download firmware in.mbn format (for example, from xiaomifirmwareupdater.com).
- Install the Qualcomm HS-USB QDLoader 9008 driver (manually through Device Manager).
- Use the QFil or Mi Flash utility in EDL mode.
⚠️ Note: Incorrect Firmware Through EDL It can turn a phone into a brick. On Xiaomi models from 2023 to 2026 (for example, Redmi Note 13 Pro).+ Xiaomi 14, or Xiaomi, this method often requires authorization through an official Mi Account, making it unavailable for self-use.
Reset via Recovery
Firmware through Fastboot
I went to the service center.
I haven't tried anything, it's my first time.
-->
4. Alternative ways of unlocking
If none of the above methods worked, consider alternatives:
| Method | Suitable for | Required. | Risks. |
|---|---|---|---|
| FRP bypass through ADB | MIUI 10-12 (older models) | Computer, USB-cable, teams ADB | Doesn't work on new firmware. |
| Delete your account through TestPoint | Any Xiaomi models | Solding iron, wires, payment scheme | High risk of damage to the fee |
| Contacting the service center | All models. | Check or box (proof of possession) | Paid service (from 1000 to 5000) ₽) |
| Use of paid services (for example, DC-Unlocker) | Models with Qualcomm and Mediatek | Loans on the service, cable | Possible fraudulent websites |
For example, to bypass FRP through ADB (only works on older versions of MIUI):
adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1
adb shell am start -n com.google.android.gsf.login/
adb shell am start -n com.google.android.gsf.login.LoginActivityThese commands simulate the completion of the initial setup, but they no longer work on MIUI 13/14.
💡
If your phone is locked after buying from hand, try contacting the previous owner via Mi Cloud (https://i.mi.com/). You need to know. IMEI Devices (indicated on or under the battery).
5. How to avoid blocking in the future
To avoid the problem of a blocked Xiaomi in the future, follow the simple rules:
- 🔐 Write your Mi Account passwords in a secure location (for example, in Bitwarden or KeePass password manager).
- 📱 Untie your account before selling your phone: go to Settings → Mi Account → Get out.
- 🔄 Regularly back up through Settings → Additionally. → Backup and reset.
- 🛡️ Do not use unofficial firmware without unlocking the bootloader – this can lead to blocking. FRP.
If you often forget passwords, set up two-factor authentication in your Mi Account (linking your phone number or email) to help restore access even if you forget your primary password.
💡
Starting with MIUI 14 (2023), Xiaomi has tightened reset protection through Fastboot and EDL. Now, official authorization through a service center is often required to unlock.
6. Frequent errors and their solutions
When you reset Xiaomi, users often face typical problems, and here are the most common ways to fix them:
- 🚫 "This device is locked" in Mi Flash Tool: Means the bootloader is locked. Solution: Unlock it through Mi Unlock Tool (you need a Mi Account tied to the phone).
- 🔌 Phone is not defined in Fastboot: Check the cable (use the original), install drivers manually or try another one USB-port (preferably) USB 2.0).
- ⚡ Reset interrupted by 50% or 99%: Possible causes: battery drain (charge up to 50%), damaged firmware (download it again), or unstable connection to the PC.
- 🔒 After reset, the Mi Account password is required again: This means that FRP I've been stuck. Try flashing the phone through. EDL or go to the service.
If you see an Anti Rollback error when you're running your firmware, it means you're trying to install an older version of MIUI than the one on your phone, in which case you're going to download the same or newer version of the firmware.