How to reset Xiaomi Redmi Note 10 Pro to factory settings: 3 proven ways

Resetting the Xiaomi Redmi Note 10 Pro to factory settings is a procedure that can be required in a variety of situations: from preparing the phone for sale to fixing software failures. However, not all users know that an incorrect reset can lead to the loss of important data or even locking the device. MIUI, Which the manufacturer does not always advertise.

Many people mistakenly believe that resetting through the settings menu completely cleanses the smartphone, in fact, even after a complete reset, some of the data can remain in memory, for example, files in protected folders or cache of some system applications. We will discuss in detail how to perform the reset as efficiently as possible, what pitfalls can meet on the Redmi Note 10 Pro with firmware. MIUI 12-14, and what to do if your phone doesn’t respond to standard methods.

We’ll focus on security: why a Mi Account reset can lock a device for 72 hours if you forget your password, and how to avoid it. You’ll also learn what alternative methods exist to unlock the bootloader, which can be useful if you plan to reflash your smartphone after the reset.

Before you get to the instructions, remember: Xiaomi Redmi Note 10 Pro (codename sweet) has unique features when reset via Fastboot, which are not found in other models of the series.

1.Resetting preparation: what to do in advance

The first rule of a successful reset is to save all the important data. Even if you plan to reset your phone due to a problem, do not be lazy to back up. On the Redmi Note 10 Pro, you can do this in several ways:

• 📱 Local copy through MIUI: Go to Settings. → The phone. → Backup: The system will offer to save data to internal memory or microSD card (if installed.
• ☁️ Xiaomi Cloud: Select Cloud Backup from the same backup menu. note that this will require a Mi Account and enough cloud space (only 5GB is available for free).
• 💻 Computer through MTP: Connect your phone to the PC USB, Choose file transfer mode and manually copy photos, videos, and documents. This is the most reliable way, but it doesn't save application settings.

The second is to make sure that the phone is at least 50 percent charged. Recovery or Fastboot can take up to 10 to 15 minutes to reset, and if the battery runs out in the process, you run the risk of getting a brick. On the Redmi Note 10 Pro with its capacious 5,020 mAh battery, it's unlikely, but it's better to be safe.

Three, remember or reset your passwords. After reset, you'll need to:

• 🔑 Password from Mi Account (if it was linked to the phone).
• 🔒 Password/pattern lock of locking the screen (if it was set).
• 📶 Wi-Fi connection data (if you plan to restore backup from the cloud).

⚠️ Note: If you forgot the password from Mi Account, and the phone was tied to the account, after resetting via Recovery or Fastboot, the device will require login and password. Without them, it will be impossible to unlock the smartphone without contacting Xiaomi support (which can take up to 3 days).

Fourth, check the version. MIUI. Redmi Note 10 Pro with older firmware MIUI 13.0.4 may not have the option to reset via Settings (a bug fixed in newer versions). → The phone. → Version. MIUI.

2. Method 1: Reset via the settings menu (the safest)

This is the easiest and most recommended method if the phone turns on and you remember the lock password, and it is suitable for most situations: before selling, when preparing for an upgrade or to fix non-critical crashes.

Step instructions:

1. Open Settings (the gear icon on the main screen).
2. Scroll down and select About Phone.
3. Click on Backup and Reset (in some versions of MIUI, this item may be called Settings Reset).
4. Select Resetting → Delete all data.
5. If you request a password or pattern lock, enter it.
6. Confirm the action by clicking Reset Settings (usually the red button).

The phone will reboot and start the cleaning process, which will take 3-5 minutes, and then you will see the screen of the initial setup, as after the purchase.

Advantages of the method:

• ✅ Does not require computer or special knowledge.
• ✅ Minimum risk of error (process controlled by system).
• ✅ Keeps the possibility of recovery from backup MIUI.

Disadvantages:

• ❌ Does not clean some system folders (for example, /data/adb).
• ❌ If the phone is locked, this method is not available.

⚠️ Note: Redmi Note 10 Pro with MIUI 14 After resetting through the menu, some applications (e.g. Google Play Services) may still cache. If you reset your phone due to crashes, it is recommended to manually clear the cache in Settings after the procedure. → Annexes.

The phone is over 50 times charged%|Backup of important data is made|Find My Device (if used) is disabled)|Password from Mi Account (if linked)-->

3. Method 2: Reset via Recovery Mode (if the phone is not turned on)

If the Redmi Note 10 Pro doesn’t load beyond the logo, freezes on the lock screen or constantly reboots, resetting via Recovery Mode will help. This method is also useful if you forgot the pattern lock, but remember the data from Mi Account.

How to log in to Recovery:

1. Turn off the phone (press the power button for 10 seconds if it freezes).
2. Press and hold the Power + Volume buttons up at the same time.
3. When the Mi logo appears, release the power button, but keep the Volume up until you see the Recovery menu.

In the Recovery menu on Redmi Note 10 Pro, the control is carried out by the volume button (move) and the power button (select). The interface can be in Chinese or English - do not worry, the items we need are easy to recognize by the icons.

Step-by-step:

1. Select Wipe Data (can be called Clear Data or displayed as a shopping cart icon).
2. Confirm the choice (usually you need to choose Yes or Confirm).
3. Wait for the process to be completed (there will be a progress bar on the screen).
4. After reset, go back to the main menu and select Reboot → Reboot to System.

What's important to know:

• 🔄 On the Redmi Note 10 Pro, resetting via Recovery does not delete files from the memory card (if installed), but completely clears the internal memory.
• 🔐 If the phone was tied to the Mi Account, you'll need to enter your login and password after the reset!
• ⚡ If the battery runs out during the process, the phone may stop turning on. Charge it to at least 30% before starting.

Method 3: Reset via Fastboot (for power users)

Fastboot reset is the most radical method that's used when the first two methods don't work. It requires a computer, USB-This method removes everything, including system files, and can lead to locking the bootloader if it is not done correctly.

What you need:

• 💻 Computer with Windows/Linux/macOS.
• 🔌 Original. USB-cable (better than the one that came with the kit).
• 🛠️ Fastboot utility (part of Android) SDK Platform-Tools).
• 🔓 Unlocked bootloader (if not previously unlocked, you will need to do it through the Mi Unlock Tool).

Instructions:

1. Turn off the phone.
2. Squeeze the power. + Volume down to enter Fastboot mode (a hare in a hat-eared hat will appear on the screen).
3. Connect the phone to the computer.
4. Open the command line (or terminal) in the Fastboot folder.
5. Enter the command to check the connection: fastboot devices If the phone is determined (its serial number will appear) - you can continue.
6. Run full reset: fastboot erase userdata fastboot erase cache fastboot reboot

The following are the key features of the Redmi Note 10 Pro:

• 🔧 The fastboot erase system or fastboot erase boot commands will remove the firmware - the phone will stop turning on! Use them only if you plan to flash the device immediately.

⚠️ Attention: On the Redmi Note 10 Pro with older firmware MIUI 12.5 The fastboot erase userdata command may not completely clear the partition /data. For guaranteed reset, use the combination: fastboot format userdata fastboot reboot But note that the format lasts longer and requires a stable connection.

💡

If the phone doesn't turn on for more than 10 minutes after being reset via Fastboot, don't panic. USB, Press the power button for 20 seconds, then try to turn it on again. Sometimes the system initializes a clean file system for a long time.

5.What to do after resetting: setup and recovery

After a successful reset, the Redmi Note 10 Pro will launch with a greeting screen, just like after the purchase.

Initial setting:

• 🌍 Choose a language and region. For Russia, it is optimal to specify Russia - this affects the available system applications (for example, Yandex.Weather).
• 📶 Connect to Wi-Fi. Without the Internet, you can not log in to Mi Account or restore a backup.
• 🔑 If your phone requires a Mi Account password, enter it now. If you forgot your password, use the recovery function at account.xiaomi.com.

Data recovery:

• ☁️ If you backed up to Xiaomi's cloud, the system will prompt you to restore it to one of the first screens.
• 📱 For local copy: after setting up, go to Settings → The phone. → Backup and select the copy file.
• 🖥️ If you have copied files to your computer, just transfer them back through the computer. USB.

System optimization:

• 🔄 Update the firmware: go to Settings → The phone. → Update the system and install the latest version MIUI.
• 🚫 Disable unnecessary system applications: C Settings → Applications can be removed or deactivated from pre-installed software (e.g. Mi Video, Mi Music).
• 🔋 Reset battery statistics: After full discharge and charging up to 100%, execute the command in the engineering menu (#4636## → Battery information → This will help calibrate the power controller.

Checking the working capacity:

• 📞 Check the work. SIM-maps: sometimes after resetting fly settings APN. If there is no mobile Internet, set up APN manually in Settings → SIM-maps and mobile networks.
• 🎵 Make sure the speakers and microphone are working: record a voice note or call another phone.
• 📷 Test the cameras: take videos and photos, check to switch between modules.

💡

If the phone is slower after reset, it's normal for the first 1-2 days, it indexes files and optimizes background processes. Don't rush to reset it again!

6. Frequent errors and their solutions

Even if you do the reset correctly, there may be problems with the Redmi Note 10 Pro, and let’s look at the most common ones and how to fix them:

1.The phone requires a password from the Mi Account after resetting:

This is Xiaomi's standard theft protection. If you forget your password:

• Go to the Mi Account website and use the recovery function.
• If you have a phone number attached, ask for it. SMS coded.
• If nothing helps, contact Xiaomi for support (a passport scan may be required to confirm ownership).

2. After reset, there is no mobile network:

Causes and solutions:

• 📡 Settings are off. APN: Go to Settings. → SIM-maps and mobile networks → Access points (APN) Add your operator’s settings manually.
• 📶 Damaged. IMEI: check IMEI In Settings → The phone. → General information. If the numbers are zeros, restore them. IMEI via the engineering menu (#4636##).
• 🔌 Communication module malfunction: If nothing helps, there may be a problem in the antenna or module NFC (Redmi Note 10 Pro, they're combined, require diagnostics at the service center.

3.The phone is stuck on the logo after the reset:

Possible causes:

• ⚡ Insufficient battery power: plug in charging and wait 15-20 minutes.
• 🔄 Firmware damaged: try logging in to Recovery and resetting again. If it doesn't work, run your phone through the Mi Flash Tool.
• 🛠️ Hardware malfunction: If the phone doesn't respond to any manipulations, it could be a memory problem (eMMC) or a processor.

The sensor is not working after resetting:

This is a rare but possible problem on the Redmi Note 10 Pro.

• 🔄 Restart your phone in Safe Mode (click the power button) → "Restart Safe Mode. If the sensor is working, the problem is in the third-party application.
• 🔧 Reset the sensor settings: in the engineering menu (#4636###) select Hardware Testing → Touch Screen and perform calibration.
• 🛠️ If the sensor doesn't work at all, maybe the plume has gone.

7. Alternative methods of discharge (for specific cases)

Sometimes standard reset methods don't work. Consider the lesser-known but effective methods for the Redmi Note 10 Pro:

1. Reset via ADB (if USB debugging is enabled):

If the phone was on debugging USB, You can reset through your computer without losing data in some areas:

adb shell


recovery --wipe_data

This method is useful if the phone turns on but does not respond to touch (such as a broken screen).

Reset via engineering menu:

The Redmi Note 10 Pro has hidden commands for resetting individual components:

• 📞 Reset network settings: ##4636## → Usage statistics → Clear data.
• 🔊 Resetting sound settings: ##36446337## (not working on all firmware).

3.Dumping through Mi PC Suite:

The official utility from Xiaomi allows you to reset your phone to factory settings through your computer:

1. Download and install Mi PC Suite from the official website.
2. Connect the phone to the computer.
3. In the program, select Troubleshooting. → Reset to factory settings.

The downside of the method is that the program often doesn’t see the phone if it doesn’t turn on.

4.Dumping through TWRP (customization):

If your Redmi Note 10 Pro has custom recovery installed (for example, TWRP), discharge:

• Enter in. TWRP (Similar to standard Recovery, but with other buttons).
• Select Wipe → Format Data (enter yes to confirm).
• Reboot.

Advantage TWRP — You can make a backup before reset directly to recovery.

⚠️ Attention: Use of custom recovery (TWRP) Unofficial firmware can lead to locking the bootloader on the Redmi Note 10 Pro. If you are not sure about your actions, it is better to refer to standard reset methods.

FAQ: Answers to Frequent Questions