How to Reboot Xiaomi: 7 Ways to Reboot for Different Devices

Rebooting Xiaomi devices is a standard procedure that helps solve most software failures, from small interface glitches to a complete system freeze. However, not all users know that there are several types of reboots, and each of them is used in different situations. For example, a soft reboot saves all data and just restarts the system, and a hard reset can lead to loss of information if you do not make a backup.

In this article, we will analyze all the current ways to reboot for different Xiaomi devices: smartphones (Redmi, POCO, Mi, TVs (Mi) TV), Smartwatches (Mi Band, Watch) and even routers, especially when the device does not respond to buttons or the screen is completely black. You will learn how to avoid typical forced shutdown errors, which key combinations work on new models (2023-2026), and what to do if the phone does not turn on after a reboot.

Important: the instructions in the article are relevant for devices based on MIUI 14/15 HyperOS (for new models) and for Google TVs TV If your device is running on outdated firmware (for example, PatchWall, MIUI 12 Some methods may not work – we will mention this too.

1. Soft reboot: when and how to apply

Soft reboot is the standard way to turn a device off and on through menus or buttons, and it doesn't delete data, it doesn't reset settings, it doesn't affect installed applications.

• 🔄 Removing small lags (e.g., slowing the interface or not opening the application).
• 📱 System updates after new software installation (sometimes a restart is required to apply changes).
• 🔋 Savings in battery power if the phone is rapidly discharged due to background process.

On most Xiaomi smartphones, the soft reboot is as follows:

1. Press the power button (usually on the right) for 2-3 seconds.
2. In the menu that appears, select Reboot (or Restart in English firmware).
3. Confirm the action if necessary.

In some models (for example, POCO F5 or Redmi Note 12) menus may be different — instead of a separate button Reboot will only turn off:

⚠️ Warning: If there is no reboot option on the menu, turn off the phone completely, wait 10 seconds and turn it on again with the power button.

For Mi TVs, TV (Like Mi. TV Q2 or Mi TV A2) Soft reboot is performed via remote:

1. Press the Settings button on the remote.
2. Go to Settings → Device → Reboot.
3. Confirm the action.

2 Hard Reboot: When the soft method doesn't work

Hard reboot is a forced shutdown of a device using hardware buttons, and you need it when you:

• 📵 The phone or TV is completely frozen and does not respond to touches / remotes.
• 🖥️ The screen is black, but the device is hot (a sign of a hanging process).
• 🔄 After the update, the system does not boot (endless animation) MIUI).

For Xiaomi smartphones (including Redmi and POCO) The hard reboot is done this way:

1. Press and hold the power button. + Increase volume for 10-15 seconds.
2. Release the buttons when the device vibrates or the screen goes off.
3. Wait 30 seconds and turn on the phone with the power button.

On some models (such as the Xiaomi 13 Ultra or Mix Fold 3), the combination may differ:

For Mi TVs, TV The hard reboot is done this way:

1. Turn off the TV from the outlet (remove the plug).
2. Hold the power button on the case (not on the remote!) for 15 seconds.
3. Connect the TV back and turn it on with a button on the remote.

⚠️ Attention: On Mi TVs TV Q1E And then, in 23, there may be no power button on the case, so turn off the power for 1 minute and turn it back on.

Turn off the charger (if connected)

Make sure your phone has enough charge (minimum 10%)

Remember or record important data (if the phone is still responding)

Don’t push the buttons too hard – it can damage the mechanism.-->

3.Reboot to Recovery Mode: for Power Users

Recovery mode is a service menu that allows you to reset your settings to factory settings, install firmware manually or clear the cache.Reboot to this mode does not delete data, but some actions (such as Wipe Data) lead to a complete reset.

To go to Recovery on Xiaomi smartphones:

1. Turn off the phone (if it freezes, perform a hard rebuke).
2. Press the power + volume button and hold until the Mi logo appears.
3. Release the buttons when you see the Recovery menu (usually in English).

In the Recovery menu, you can:

• 🔄 Reboot - a normal reboot.
• 🗑️ Wipe Data – reset to factory settings (removes everything!).
• 📁 Wipe Cache – Cache cleanup (safe, data is not deleted).
• 📥 Apply update – installing firmware from a memory card.

For Mi TVs, TV Recovery entrance is different:

1. Turn the TV off the socket.
2. Press the Menu button on the remote and the power button on the case.
3. Connect the TV to the socket, holding the buttons for 10 seconds.

⚠️ Attention: On TVs with Google TV (Like Mi. TV P1) Recovery menus can be in Chinese. Don't choose the word option (formatting) - it will delete all data!

4.Reboot through ADB: for developers and advanced users

If your Xiaomi is connected to a computer, and debugging is on USB It is enabled, you can restart it through the command. ADB (Android Debug Bridge. This method is useful when:

• 🖥️ Phone responds to touch, but reboot menu is not available.
• 🔧 You need to reboot in Fastboot or Recovery without buttons.
• 📡 Automation of the process (e.g. for testing).

Instructions:

1. Install ADB and Fastboot on your computer.
2. Connect your phone to the PC by USB and allow debugging (on the phone will be a request).
3. Open the command line (cmd) and enter:

adb devices

If the device appears in the list, follow one of the commands:

• Regular reboot: adb reboot
• Recovery: Adb Reboot Recovery
• Reboot in Fastboot: Adb Reboot Bootloader

For Mi TVs, TV Android TV The same command, but you need to include debugging USB developer-setting:

1. Go to Settings. → On TV. → Build number and press 7 times to activate Developer Mode.
2. Go back to Settings → For developers and enable USB debugging.
3. Connect the TV to the PC via USB-Port and use the same commands ADB.

1. Reconnect. USB-cable (it is better to use the original cable).

2. Install Xiaomi drivers manually through Windows Device Manager.

3. Enable in the phone settings File Transfer (MTP) Instead of just charging.-->

5.Reboot smartwatches and fitness bracelets Xiaomi

Smart watches and bracelets Xiaomi (Mi Band) 7/8, Watch 2 Pro, Watch S3) And they also sometimes require a reboot. Unlike smartphones, there's no power button, so the process is different.

For the Mi Band. 7/8 Mi Smart Band Pro:

1. Unplug the bracelet from the strap.
2. Find a small reset button on the back (near the charging contacts).
3. Press it with a pin or paperclip and hold it for 5-7 seconds until the screen blinks.

For Xiaomi Watch 2 Pro or Watch S3:

1. Press the physical button on the body for 10-15 seconds.
2. Let go when the clock vibrates and resets.

If the watch or bracelet does not respond:

• 🔋 Put them on charge for 30 minutes - sometimes a discharged battery blocks the reboot.
• 📱 Reconnect them to the Mi Fitness or Zepp Life app and reset them via the device menu.

⚠️ Attention: On Xiaomi Watch S1 Pro resetting to factory settings via a button deletes all data from the clock, including your workout history!

6.What to do if Xiaomi doesn't turn on after reboot

If the device doesn't turn on after the reboot, the reasons can be different, from a dead battery to a damaged firmware.

Step 1. Check the charging.

• 🔌 Connect the original charger and wait 30 minutes.
• 🔋 If the indicator is not on, try another RAM or cable (better from Xiaomi).
• 🔄 On some models (Redmi Note 11 and later) it may take 5-10 minutes to recharge at full discharge before the indicator appears.

Step 2. Try a forced launch

• For smartphones: pinch the power + volume increase by 20-30 seconds.
• For TVs: disconnect from the network for 1 minute, then turn it on.

Step 3. Check for signs of life

• 🔊 Listen to vibrations or sounds when connecting the charger.
• 💡 Hold the flashlight to the screen at an angle - sometimes the image is there, but the backlight doesn't work.

If nothing helps:

💡

If the phone doesn't turn on after a failed update, DO NOT try to flash it through Recovery - this can block the bootloader.Use the official Mi Flash Tool in Fastboot mode.

7. Frequent reboot errors and how to avoid them

Many users make mistakes that can make the problem worse, and here are the most common ones:

❌ Error 1: Interrupting the Update Process

If the phone is updated and forced to restart, a bootloop can occur. On HyperOS models (2026), the interrupted update is automatically restored the next time it is turned on, but on old firmware (MIUI 12 and below, this leads to a brick (breakdown).

❌ Error 2: Using unoriginal chargers

Cheap cables or power supplies can cause power surges that prevent the phone from turning on after rebooting. Always use original accessories or certified ones (Anker, Baseus).

❌ Error 3: Recovery reset without backup

The Wipe Data option in Recovery deletes all data, including photos and contacts.

• 📱 Sync your data with Mi Cloud.
• 💾 Make a backup copy through Settings → Additionally. → Backup.
• 📁 Copy important files to your computer.

❌ Error 4: Ignoring overheating

If the phone is hot and you're trying to reboot it, it can damage the processor. Let the device cool down for 10 to 15 minutes before the reboot.

FAQ: Answers to Frequent Questions