Xiaomi Redmi 7A is one of the most popular budget smartphones of the brand, but even it is not immune to system failures, freezes or “black screen”.Rebooting (reboot) devices often solves most problems, but it is important to do it correctly so as not to aggravate the situation. In this article, we will discuss all possible ways to reboot with the characteristics of the model, including soft and hard reboot, as well as recovery through Fastboot mode.
Despite the simplicity of the procedure, many users make mistakes, such as trying to pull out the battery (which is impossible on the Redmi 7A due to a non-removable battery) or holding the buttons for too long, putting the phone in firmware mode.
This article will be useful for both beginners and experienced Xiaomi owners who are faced with unusual situations - from banal interface hanging to complete system failure. All instructions are tested on current versions of MIUI 12-14 and adapted to the hardware features of Redmi 7A (codename pine).
1. Soft reboot: the standard method
This is the safest method to use first, it doesn't affect user data and simulates the usual turn off/on of the phone, it's suitable for eliminating small lags, app hangovers or slow system operation.
To perform a soft reboot on Xiaomi Redmi 7A:
- Press and hold the power button (located on the right end of the body) for 2-3 seconds.
- On the screen will appear menu with options to Turn off, Reboot and Emergency mode.
- Slip on the item Reset and confirm the action.
If the screen doesn’t respond to touch, but the phone is still on (for example, the button lights), try connecting the charger – sometimes this “wakes up” the sensor.
💡
If a soft reboot didn't work the first time, repeat the procedure 2-3 times in a row. Often, the system lags are eliminated after the second attempt.
2. Hard reset: forced rebut
This method is used when the smartphone is completely frozen, does not respond to presses or the screen is gone, but the phone does not turn off.
Instructions for Redmi 7A:
- Press the power and volume button (top key on the left end) at the same time.
- Hold them for 10-15 seconds until the screen goes out and the phone vibrates (turn off signal).
- Release the buttons and wait for the automatic turn on (usually takes 20-30 seconds).
If the phone doesn't turn on after a hard reboot, plug it into a 10-15-minute charger -- it's possible the battery ran out when it crashed. If the charging indicator doesn't burn, check the cable or try another charger.
What to do if the phone vibrates but does not turn on?
3.Reboot through the recovery menu (Recovery)
If the smartphone is turned on but is not running smoothly (e.g., apps are constantly crashing or the system is slowing down), it’s worth trying a reboot via Recovery Mode.This method is also useful if the soft rebuke doesn’t help, but the phone is still responsive to taps.
Step-by-step:
- Turn off the phone in the standard way (via the power menu).
- Press the power button and increase the volume at the same time.
- Hold them until the Mi logo appears and vibrations (usually 5-7 seconds).
- Release the buttons and you will be taken to the Recovery menu (in English or Chinese).
- Use the volume buttons for navigation and the power button to select Reboot (reboot).
The Recovery menu also includes Wipe Data (reset to factory settings) and Wipe Cache (clean up cache) options, and don't choose them unnecessarily, as this will lead to data loss!
Once a week |Only when it crashes |Never |I don't know what it-->
4. Reboot via Fastboot mode (for power users)
Fastboot mode is designed to firmware or restore the system, but it can also be used to force a reboot if other methods have not worked.This method requires connecting the phone to the computer and installing Xiaomi drivers.
Algorithm of action:
- Turn off the phone (use the hard receptacle from Section 2 if necessary).
- Press the power and volume button (bottom key) at the same time.
- Hold until the image of a hare in a hat-eared hat and the inscription Fastboot appears on the screen.
- Connect your phone to your PC through USB-cable.
- On your computer, open the command line and type: fastboot reboot
If the team is not working, check:
- 🔌 Connecting the cable (try another port) USB).
- 🖥️ Have you installed the Mi Flash Tool or ADB.
- 🔒 Is the boot loader unlocked (on Redmi) 7A it's locked in default).
Install Xiaomi drivers|Download the Mi Flash Tool|The loader is unlocked (if necessary)|Use the original USB-cable-->
5.Reboot with black screen (phone unresponsive)
If the Redmi 7A screen is completely black, but the phone vibrates when you press buttons or connect a charge, this may indicate a hardware display failure or software conflict.
Try the following sequence:
- Connect the phone to charge and leave it for 30 minutes (even if the indicator doesn’t burn).
- Press the power button and both volume buttons simultaneously for 20 seconds.
- If the phone vibrates but the screen doesn’t catch fire, try connecting it to the TV via a USB-C → HDMI adapter (if supported).
- In extreme cases, contact the service - the problem may be in the display plume or motherboard.
⚠️ Warning: If the phone overheats when the black screen (body is hot), immediately disconnect it from charging! this may indicate a short circuit or battery failure.
6. Frequent mistakes and how to avoid them
Many users are making problems worse by performing a reboot incorrectly, and here are the most common errors and their consequences:
| Mistake. | Effects of consequences | How to avoid |
|---|---|---|
| Holding buttons too long (>20 seconds) | Log in to Fastboot or reset settings | Hold no more than 15 seconds. |
| Restart during system update | Phone's "Brick" (not included) | Wait until the update installation is completed |
| Using a non-original cable for Fastboot | Errors of connecting to the PC | Use the cable from the kit |
| Ignoring vibrations when rebooting | Repeated system failure | Wait for a full shutdown before turning on |
Another common problem is trying to pull out the battery. On the Redmi 7A, the battery is not removable, and such manipulations can damage the plume or contacts. If the phone does not respond to any action, you should contact the service center.
💡
A hard reboot is not a panacea. If your phone freezes more than 3 times a week, it's an excuse to check it for viruses or firmware failures.
7.When the reboot doesn't help: further action
If none of these methods have brought the phone back to life, maybe the problem is deeper than it seems.
- 🔄 Reset to factory settings: Delete all data, but return the system to its original state).
- 📥 Flashing: Requires an unlocked bootloader and PC. Detailed instructions are available on the forums 4PDA or XDA Developers.
- 🛠️ Diagnostics in the service: If the phone doesn't turn on, warm up and respond to charging, it may be a hardware malfunction (for example, a failure of the power controller).
Before you reset or firmware, try to remember when you had a problem: installing a new app, crashing your phone, or updating your system, which will help you diagnose the cause more accurately.
⚠️ Attention: If Redmi 7A After a failed firmware is not turned on or detected by the computer, do not try to flash it again without diagnosis! This can lead to complete loss of data or damage to memory chips.