When a user forgets the password of their Mi Account on a Xiaomi Redmi Note 4 device, it is one of the most common problems in the brand ecosystem. Once a full Hard Reset is completed, the security system requires authorization to an account that was active on the smartphone before the lock. This is a security mechanism designed to protect the owner’s data in the event of theft or loss of a gadget. However, in the realities of life, it often happens that access to the phone number or email is lost, and it is impossible to recall a complex combination of characters.
Redmi Note 4 owners are faced with an activation screen that cannot be circumvented by standard methods. The system will not allow you to move to the desktop until the correct login and password bundle is entered. If you find yourself in this situation, you should not panic, since there are several proven technical solutions. In this article, we will discuss in detail all the current ways to restore access, from official methods of recovery through the site to more complex firmware procedures.
⚠️ Before you start any manipulations, make sure that the battery level of your Xiaomi Redmi Note 4 is at least 60%. interruption of the unlocking or firmware process due to battery discharge can lead to irreversible consequences for the software of the device.
Official methods of restoring access through the site
The first and most logical step is always to try to restore access to your account in legal ways. If you remember your login (phone number or email) but you forget your password, Xiaomi services provide tools to change it. Go to the official account management page from any other device with Internet access, you will need to enter the data that you remember and follow the security instructions.
Often, users are unaware that password resets may require access to a backup email or answer to a secret question if they have been previously configured. Enter the phone number tied to the Mi Account and wait for the confirmation text message. If the SIM card is lost, try using the recovery option via email. The process can take some time, as the security system automatically checks the request for suspicious activity.
- 📱 Go to the official i.mi.com website or account.xiaomi.com from your computer or other smartphone.
- 🔑 Enter the phone number or email used to sign up for the Redmi Note 4.
- 📩 Select the method of receiving the confirmation code (SMS or Email) and follow the instructions on the screen.
- 🔄 After a successful password change, wait. 15-30 minutes before retrying to log in on the locked device.
It is important to understand that after changing the password on the site, on the smartphone Redmi Note 4 data may not be updated instantly, requires a stable connection to the Wi-Fi network or mobile Internet. If the device can not connect to the network due to blocking, this method may not work immediately, and you will need to use alternative options described below.
⚠️ Note: If you changed your password less than 7 days ago, Xiaomi’s security system may temporarily block the ability to unlock your device with this new password.
📊 Have you ever had a Mi Account blocked?
Yeah, I forgot my password.
Yeah, the phone was a b/w.
No, I remember all the data.
Not yet.
Using Xiaomi PC Suite for authorization
One of the most effective ways to get around the password requirement on the lock screen is to use official Xiaomi software. PC Suite (or Mi) PC Suite) for Windows computers, which is based on the fact that a trusted device that previously logged in to an account may have authorization priority. USB-cable, computer with installed utility and itself blocked Redmi Note 4.
The process starts with connecting your smartphone to your PC, and if you see a request for debugging permission or data access on your phone screen, it needs to be confirmed, although if you lock it completely, it may not be possible, and then the program can suggest alternative ways: Go to the account settings inside the program on your computer and try synchronizing or logging out, and then log in under the new data.
The procedure for the PC Suite:
1. Run Xiaomi PC Suite on your computer.
2. Connect the Redmi Note 4 via USB.
3. Select the "Account" or "Mi Account" section.
4. Press "Logout" if the device is determined.
5. Enter again with a new password.
It is worth noting that the effectiveness of this method depends on the version of MIUI installed on your Redmi Note 4. On newer versions of the shell, security is increased, and simple authorization via a PC may not remove the activation lock. However, for models released during the popularity of the Redmi Note 4, this method often proved to be a working solution to the problem without losing data.
What to do if your computer can’t see your phone?
Make sure drivers are installed ADB And Fastboot. Try another one. USB-cable, preferably original. Also check if debugging is enabled. USB In some cases, it helps to press the volume button when you connect the cable to go to Fastboot mode, but for PC Suite usually requires a system boot mode or a special connection mode. Reset via Fastboot and Mi Flash Tool If standard password recovery methods do not help, you will have to resort to a more radical method - flashing the device in Fastboot mode. This method involves a complete cleaning of the memory of the smartphone and installing a clean version of the operating system. For Xiaomi Redmi Note 4 (Codenamed "mido" is one of the most reliable ways to delete a forgotten Mi Account, since when installed clean, the old account does not pull up if you perform the procedure correctly. To implement this plan, you will need a Mi Flash Tool utility downloaded from the official website and a Fastboot firmware file (extension.tgz) that matches your model. It is important to choose Fastboot firmware, not Recovery. You also need to uncivilize the downloaded firmware file to the root of the C disk so that the path to the files is short and does not contain Cyrillic characters. ☑️ Fastboot Firmware Preparation Download Mi Flash Tool Find Fastboot Firmware for midoUnlock firmware in C:\romCharge the phone higher 60%Install drivers ADB/FastbootCompleted: 0 / 5 The firmware process requires care. Put Redmi Note 4 into Fastboot mode, pressing both the power and volume buttons, and the screen will show a picture of a hare fixing an android, connect your phone to your computer, launch the Mi Flash Tool, and press the Refresh button. If the device is determined, choose the path to the firmware folder. firmware mode Save data Requirement to unlock Error risk Clean All No (full reset) No (for global versions) Low Save User Data Yes Requires an unlocked bootloader Medium Clean All + Lock No Requires unlocked bootloader High (risk of bricks) In the program interface, select the option "Clean All" (Clean all). Do not select the Clear All and Lock option unless you are 100% sure of the device region and firmware version, as this can lead to locking the bootloader and turning the phone into a brick". After selecting "Flash" and wait for the process to be completed, which usually takes 200 to 500 seconds. Bypass locking through service codes and engineering menus There is a lesser-known method that in some versions of MIUI allowed you to bypass the activation screen through an engineering menu or special codes. This method does not require a computer, but its effectiveness on the Redmi Note 4 depends on the specific version of Android and the security patch. The essence of the method is to try to call the system settings or browser through the emergency screen. Try entering the combination # #6484# or #4636# in the dial field (if there is access to the menu). From there, you can try to go to Wi-Fi settings, connect to the network, and then, using interface vulnerabilities, launch your browser or Google account settings to reset your device through them. ⚠️ Warning: The engineering menu contains critical hardware settings. Do not change settings you don't know the value of, especially in the radio and base station sections. This can lead to signal loss or unstable operation of the Xiaomi Redmi Note 4. Another option is to exploit a vulnerability in the voice assistant or accessibility settings interface, and by clicking several times on certain elements of the lock interface, you can sometimes call Google voice search. Ask the assistant to "Open Settings" or "Open browser". If the system responds, you will get access to the Internet and be able to reset through your Google account settings, which sometimes helps to remove and block Mi. FRP When official methods are exhausted, specialized utilities for resetting come to the rescue. FRP (Factory Reset Protection) and Mi Account Lock. For Xiaomi Redmi Note 4 well-proven tools like Xiaomi Account Unlock Tool or combines like UnlockTool (paid) and MI Unlocker.These programs use bootloader exploits or vulnerabilities in the data protocol to remove the account's anchor. Most of these utility applications require the phone to go into a special mode, often called a "data-sharing" mode. EDL (Emergency Download Mode.Redmi Note 4 often requires disassembly of the case and closure of test points on the board, or the use of a special cable. After connecting the device in mode EDL The unlocker writes a modified bootloader to the phone’s memory or patches system files, removing the account verification. 🔧 Download the current version of the Mi Account unlock utility (for example, Mi Account Unlock Tool). v3 or newer). 🔌 Transform the Redmi Note 4 into mode EDL (via a combination of buttons or closing contacts). 💻 Connect your phone to your PC and wait for Qualcomm drivers to install. 🚀 Press the "Unlock" button in the program and wait for the success message. Remember that using third-party software always carries risks. You trust access to your device to unverified software. In addition, many free versions of such programs may contain viruses or miners. Redmi Note 4 is a popular model, so there are many patches for it, but it is important to choose tools from well-known developers on profile forums. 💡Using paid professional tools (UnlockTool) is often more effective and safer than free tools, as they are updated regularly and have support, which is critical for bypassing new security patches. MIUI. Frequently asked questions (FAQ) Can you unlock Redmi Note 4 without a computer? Officially not. If you forgot your password and can't retrieve access via SMS or email, you can't do without a computer (or other device to change your password on the site) to do it. Third-party methods through the engineering menu work unstable and depend on the version of the software. Will unlock all the data on the phone? Yes, 99% of the time, Mi Account bypassing (Hard Reset, Fastboot firmware, Unlock Tool) involves completely clearing user data. What is a "Mi Account Lock" and how is it different? FRP? Mi Account Lock is a protection from Xiaomi, requiring you to enter a password from your Mi Account after resetting. FRP (Google Factory Reset Protection: Google Factory Reset Protection requires you to enter a Google account. Redmi Note 4 can be active both protections at the same time. Is it safe to buy an unlocked phone with your hands? Buying a phone that has been unlocked through third-party services (bypassing Mi Account) carries risks. If you have an official firmware update or a backlog, you might want to buy devices where the seller logged out of your account before you sell. Xiaomi support can only help if you are the rightful owner and can provide a check for the purchase of the device and a box with the help of the device. IMEI. In this case, they can delete the account link on the server.