Xiaomi Redmi 8 Pro is a popular smartphone with powerful hardware, but even its owners sometimes face the need to unlock. A forgotten pattern lock, a blocked Mi Account or a failed firmware can turn the device into a brick. In this article, current ways of unlocking for 2026, including official and alternative methods, taking into account the features of the model.
The main difficulty in unlocking the Redmi 8 Pro is the protection of the Mi Cloud and the binding to the Xiaomi account. the manufacturer has tightened security policy after 2021, so the old instructions (for example, through the use of the new system) EDL-The modes often don't work. We've only collected proven methods that take into account these changes.
Important: if you are not sure of your actions, you should contact the service center. Incorrect unlocking can lead to the loss of IMEI or lock the bootloader permanently.
1 Unlocking through Mi Unlock Tool (official method)
This is the only legal method approved by Xiaomi.Corresponding if you remember your Mi Account details, but the phone is locked due to a reset or password error.The procedure requires a computer and an original USB Type-C cable.
Download the official Mi Unlock Tool (version no lower than 5.5.224.24 – older ones may not support the Redmi 8 Pro). Note that Xiaomi requires you to link your account to your device 72 hours before unlocking. If you don't, the method won't work.
- 🔌 Connect your phone to your PC in Fastboot mode (clip Volume Down) + Power with the device switched off).
- 🖥️ Launch the Mi Unlock Tool and log in to the same account you’re linked to your phone.
- ⏳ Wait for the check (it can take up to 10 minutes). If the error "Couldn't unlock" - try again in 72 hours.
- 🔓 After successful unlocking, the phone will reboot with factory settings.
⚠️ Warning: After unlocking through Mi Unlock Tool resets DRM-Keys (Widevine will not work) L1 viewable HD-content Netflix/Disney+). They can only be restored by re-flashing through EDL service-centre.
Download the latest version of the Mi Unlock Tool|Enable debugging on USB developer-setting|Link your Mi Account to your phone 72 hours before unlocking|Use the original cable USB Type-C|Charge your phone at least 60%-->
2. Recovery Mode reset (without data loss – myth or reality?)
Many users believe that resetting through Recovery saves data. That's not true - any reset on Xiaomi formats the /data partition by deleting photos, messages and apps. However, this method works if you don't remember the password, but remember the Mi Account details.
To get to Recovery on Redmi 8 Pro:
- Turn off the phone.
- Press Volume Up + Power for 10-15 seconds until the Mi logo appears.
- Select the language (volume buttons) and go to Wipe Data → Wipe All Data.
- Confirm action. After rebooting, enter your Mi Account details to activate the device.
If the phone requires an old password after reset, then the Mi Account was not untied, in which case only unlocking through Fastboot will help (see the next section).
| Resetting method | You need a Mi Account? | Are the data stored? | Difficulty |
|---|---|---|---|
| Recovery Mode | Yes. | No. | ⭐ |
| Mi Unlock Tool | Yes. | No. | ⭐⭐ |
| Fastboot (teams) | No. | No. | ⭐⭐⭐ |
| EDL (Service Mode) | No. | Depends on the firmware. | ⭐⭐⭐⭐ |
3. Unlock via Fastboot (for advanced users)
If you don’t remember Mi Account details but you have access to Fastboot, you can try resetting the lock via ADB commands. This method is suitable for Redmi 8 Pro with an unlocked bootloader (if you previously used the Mi Unlock Tool).
You'll need:
- 💻 Computer with installed ADB and Fastboot.
- 🔌 The original cable. USB Type-C (cheap cables may not transmit data to Fastboot).
- 📄 Firmware file for Redmi 8 Pro (download from xiaomifirmwareupdater.com).
Step-by-step:
fastboot devices # Check the connection
fastboot oem edl # Translation to EDL- Mode (if not working, skip)
fastboot flash recovery twrp.img # Custom recovery installation (optional)
fastboot erase userdata # Deletion of user data
fastboot erase frp # Reset FRP (Factory Reset Protection)
fastboot reboot⚠️ Note: The fastboot oem edl command doesn't work on all versions of the Redmi 8 Pro. Unless the phone is identified as Qualcomm after it. HS-USB QDLoader 9008, use an alternative method with firmware via Mi Flash Tool.
What if the Fastboot can’t see the device?
4. bypassing Mi Account after reset (method for 2026)
If the phone requires Mi Account details after resetting via Recovery, which you don't remember, there are no official ways to get around, but there are workarounds for the Redmi 8 Pro based on MIUI 12-14:
Method 1: Test Point (Test Point)
This method requires disassembling the phone and closing the contacts on the board, and is only suitable for advanced users!
- Turn off the phone and remove the back cover (heating with a hair dryer or using suction cups).
- Find Test Point (usually next to the battery connector, marked as TP).
- Close the contacts with tweezers and connect the phone to a PC – it will be defined as Qualcomm 9008.
- Swipe your phone through the Mi Flash Tool with the Clean All tick.
Method 2: Via a vulnerability in MIUI (not working on all firmware)
On some versions of MIUI, you can bypass account verification via ADB:
adb shell
am start -n com.android.settings/.SettingsIf you open your settings, go to Accounts → Xiaomi and add a new account. This method works on MIUI 12.0.3–12.5.4, but Xiaomi regularly closes such vulnerabilities.
💡
If the phone asks for an old Mi Account after a reset, but you don’t remember it, try to restore access via account.xiaomi.com. Sometimes it helps to link to an email or phone number, even if the password is lost.
5 Unblocking through service centers: cost and risks
If independent methods did not help, you can contact the service: the cost of unlocking the Redmi 8 Pro in 2026:
- 💰 Resetting of pattern lock/password: 800–1500 ₽.
- 💰 Mi Account bypass: 1500–3000 ₽ (depends on the firmware version).
- 💰 Unlocking the bootloader (if blocked after a failed firmware): 2000–4000 ₽.
Risks of accessing unofficial services:
- ⚠️ Installation of pirate firmware with viruses or spyware.
- ⚠️ Loss of loss IMEI (phone will stop catching the network).
- ⚠️ Locking your device through Mi Cloud (if the service uses illegal methods).
Official Xiaomi service centers in Russia:
- 📍 List on the Xiaomi website (firm centers with a guarantee).
- 📍 Salons of the Messenger and MTS (partner services, but with official spare parts).
💡
Xiaomi’s official services never ask for a password from a Mi Account – they use their own unlocking tools. If the wizard demands your data, it’s a scam!
6.How to avoid blocking in the future
To avoid the Redmi 8 Pro locking again, follow these tips:
- 🔐 Use a fingerprint or facial recognition in addition to a password.
- 📝 Write backup recovery codes (they can be generated in Settings) → Passwords and security).
- ☁️ Regularly sync contacts and photos with Mi Cloud or Google Drive.
- 🔄 Do not disable Find Device in the Mi Account settings – this will help unlock your phone through the web interface.
- 🛠️ Do not install custom firmware without unlocking the bootloader (this will lead to a breeze).
If you often forget passwords, set up Smart Lock in Android.This feature automatically unlocks your phone in trusted places (such as at home or work). → Security → Smart Lock.
It is also useful to enable remote unlocking through Google Find My Device:
- Go to google.com/android/find.
- Select your Redmi 8 Pro and click Lock the device.
- Set a new password, it will replace the old one after connecting to the Internet.