A blocked Mi Account on Xiaomi Redmi 7A can be a serious problem: the phone turns into a “brick”, data is lost, and standard methods of resetting through Recovery do not work. The reason for blocking is most often due to a forgotten password, buying a used device with a tied someone else’s account or activating protection after resetting. Unlike modern Xiaomi models, the Redmi 7A (released in 2019) has security vulnerabilities, but official ways of unlocking it are still available.
In this article, we will discuss 5 proven methods - from appealing in support of Xiaomi to technical bypasses through Fastboot and EDL. Importantly, not all methods guarantee data security, and some require special equipment. If you are not sure of your skills, it is better to contact professionals - the wrong actions can permanently put the phone out of order.
Why Redmi 7A is blocked through Mi Account and how to prevent it
The Mi Account system on Xiaomi Redmi 7A has two key functions: protection against theft and data synchronization.
- 🔒 Incorrectly entering a password more 5 Once in a row (the account is blocked on the 24 An hour later, a confirmation is required. email/SMS).
- 📱 Resetting your settings via Recovery without detachment (Factory Reset Protection — FRP).
- 🛒 Buying a used phone with a tied someone else’s account (the previous owner did not untie the device).
- 🔄 Update the firmware with the transition to a newer version MIUI, security-enhanced.
On the Redmi. 7A used MIUI 10/11 (depending on the firmware version where protection is implemented through binding IMEI This means that even after a complete reset, the phone will require data from the Mi Account that was last on it, and the only legal way to avoid locking is to untie the device from the account before resetting through Settings. → Mi Account → Delete the account.
⚠️ Note: If you have purchased a Redmi 7A If the seller has not untied his Mi Account, contact him - without his help, unlocking through official methods will be impossible. Otherwise, only illegal methods will remain, which may violate the terms of the guarantee.
Since 2021, Xiaomi has tightened its security policy: now, to unlock through support, you need to provide purchase checks or a warranty card. If you do not have them, the chances of an official solution to the problem are minimal.
Official way: unlocking through Xiaomi support
The safest, but also the longest, method is to contact Xiaomi’s support team, which is suitable if:
- 📄 You have documents on your phone (check, warranty card, box with serial number).
- 📧 You remember the email linked to your Mi Account, but don’t remember the password.
- 📱 The phone was not stolen (there is no lock on Xiaomi’s database at the request of law enforcement agencies).
Step-by-step:
- Go to account.xiaomi.com and select Forgot Password.
- Enter the email or phone number associated with your account, and if you don't remember, try to recover it through a Backup email or Secret Question.
- If recovery through the site does not help, create a ticket in support: 🌐 Come in. mi.com/global/support. 📝 Select the Mi Account category → Unlock Device. 📎 Attach scans of documents to the phone (must be visible). IMEI serial number).
Wait for a response (usually 3-7 days) If the documents are in order, you will be sent an unblocking instruction.
| Type of document | Is it necessary to unlock? | Notes |
|---|---|---|
| Check of purchase | ✅ Yes. | Must contain an IMEI or serial number |
| Guarantee pass | ✅ Yes. | Accepted only with the store stamp |
| Phone box. | ⚠️ Maybe. | Only if it has an IMEI matching the phone. |
| Passport photo | ❌ No. | Required only for identification in some regions |
⚠️ Note: If the phone was purchased on AliExpress, Amazon or other platforms, Xiaomi support may refuse to unlock.In this case, try to contact the seller - some stores provide help with unblocking the account.
If Xiaomi’s support fails, alternative methods remain—but they require technical skills and can lead to data loss.
💡
Official unlocking through Xiaomi support is the only legal way, but it works only if you have documents on your phone.
Method 2: Unlocking via Fastboot (for power users)
The method is suitable if you have access to Fastboot mode, but does not work on the latest versions of MIUI 12+ (Redmi 7A usually has a MIUI 10/11, so the odds are high).
What you need:
- 🖥️ Windows computer (Windows recommended) 10/11).
- 🔌 USB-cable (original or high quality).
- 🛠️ Used by Mi Flash Tool, ADB & Fastboot, Qualcomm drivers.
- 📂 Firmware for Redmi 7A (The version must match the current version on the phone).
Instructions:
- Download and install the Mi Flash Tool from Xiaomi’s official website.
- Turn off the phone, then press Volume Down + Power to log into the Fastboot.
- Connect your phone to your PC. The Qualcomm HS-USB QDLoader 9008 should appear in the Device Manager.
- Launch the Mi Flash Tool, select the downloaded firmware (.tgz format) and press Refresh.
- At the bottom, select Clean All (full reset) and click Flash.
If the process is successful, the phone will reboot without being tied to the Mi Account, but there are risks.
- ❌ Loss of all data (photos, contacts, messages).
- ❌ Possible hard-brick (if the firmware is not suitable).
- ❌ On the new versions MIUI An authorized developer account may be required.
Download Mi Flash Tool from the official website |Install Qualcomm Drivers | Check the MIUI version on your phone | Download the firmware for Redmi 7A (codename: pine) | Backup important data (if possible)
-->
If the Mi Flash Tool is running an Anti Rollback error, you are trying to flash an older version of MIUI than the one on your phone, in which case you can try to find firmware for the same or newer version.
What to do if the Mi Flash Tool can't see your phone?
Method 3: Bypass Mi Account through EDL (emergency mode)
EDL (Emergency Download Mode) is the “last chance” to unlock if other methods have failed.It allows you to flash the phone at a low level, bypassing the Mi Account check. However, for the Redmi 7A, this method requires an authorized developer account or a special box (for example, UFi Box, EasyJTAG).
How it works:
- The phone is switched to EDL mode via circuiting the contacts on the board or using the adb reboot edl command (if debugging over USB is enabled).
- Through the Mi Flash Tool or QFil, a modified firmware is sewn without checking the account.
- After firmware, the phone starts in a “clean” state, without being tied to the Mi Account.
Challenges and limitations:
- 🔧 Requires disassembly of the phone to close contacts (risk of damage to the board).
- 💰 You need to buy authorization or boxing (cost from 5000 rubles).
- ⚠️ On the Redmi. 7A s MIUI 12+ Anti-Rollback 4 protection can be triggered, blocking the firmware.
If you don't have experience with soldering or EDL, you should go to a service center, and if you don't close your contacts correctly, you can take out the power unit or the processor.
💡
Before disassembling the phone, take a picture of the location of all the plumes and screws. On the Redmi 7A, it is easy to damage the flexible plume of the display when the case is not opened neatly.
Method 4: Use of MIUI vulnerabilities (for older versions)
Redmi 7A with MIUI 10/11 has vulnerabilities that can bypass Mi Account without firmware, which don’t work on all devices and can be closed in new updates.
Method 1: Bypassing an emergency call
- On the lock screen, press Emergency Call.
- Enter the code ##4636## (the test menu will open).
- Go to Usage statistics → Back (you may need a few clicks).
- If you are lucky, you will be taken to Settings where you can disable Mi Account.
Method 2: Recovery Reset with FRP bypass
- 🔄 Go to Recovery (click Volume Up) + Nutrition).
- 🌐 Choose Wipe Data → Wipe All Data.
- 🔑 After rebooting at the Wi-Fi setup stage, go back and try skipping the account binding (sometimes it works on older versions). MIUI).
⚠️ Note: These methods may not work on Redmi 7A If you still need a Mi Account after reset, try other ways.
Some versions of MIUI 10 for Redmi 7A work bypassing by creating a second user: on the lock screen, click Add User → Create a new user → return to the main profile and delete Mi Account through the settings. However, this method is closed in newer builds.
Method 5: Buying Unblocking from Third Party Services
If official methods have failed and self-unblocking is too risky, you can turn to third-party services.
- 🔓 Remote unlocking by IMEI (cost: 500–2000 rubles).
- 🛠️ Firmware through EDL with a guarantee (cost: 1500-3000 rubles).
- 📄 Fake documents to appeal for Xiaomi support (illegal, risky).
Popular services (check reviews before paying!):
- 🌍 miunlock.ru (Russia, Ukraine, Kazakhstan).
- 🌍 unlockunit.com (international).
- 🌍 gsmforum.ru (forum with proven masters).
How to avoid scams:
- ✅ Payment only after confirmation of unlocking (for example, through a secure transaction on Avito).
- ✅ Check reviews about the service on independent sites (for example, Otzovic, Yandex.Maps).
- ❌ Don’t settle for a 100% prepayment – this is a sure sign of fraud.
The average time to unlock through third-party services is between a few hours and 3 days, and some services require a phone to be mailed, which increases the risk.
What do you do if nothing helps?
If all of these methods fail, you have three options:
- Use your phone without unlocking: 📞 Calls and SMS It will work (unless it is blocked at the operator level). 🌐 Wi-Fi and mobile internet can be accessed, but without the ability to install apps.
- Selling your phone for parts: 💰 Display, battery, camera and other modules can be sold separately. 📌 Average price per redmi used 7A for spare parts: 1000-2500 rubles.
Contact the Xiaomi Service Center
- 🏢 The official addresses of the SC can be found on the website mi.com.
- 💸 Unblocking cost: 2000-5000 rubles (depending on the region).