How to unlock Mi Account on Xiaomi Redmi 6A: 5 proven ways (2026)

Blocked Mi Account on Xiaomi Redmi 6A — The problem that thousands of users face is that the smartphone becomes a brick: you can't install apps, update your firmware, or even reset your settings. Forgotten password, purchase of a used phone with a tied account, suspicious activity (for example, changing the account) SIM-In this article, we will discuss all the current ways of unlocking, from official (through restoration of access) to alternative (bypassing the account for advanced users).

It’s important to understand that Xiaomi has tightened security policies after 2020, so old methods like Fastboot bypassing on the Redmi 6A often don’t work. We’ll focus on solutions that have been confirmed by users in 2023-2026, taking into account the features of this model (Qualcomm Snapdragon 425 processor, MIUI 12 and later). If you’re not sure about your skills, start with official methods (sections 2-4).

1. Restoration of access through the official Mi website

The most reliable and legal way to re-establish Mi accounts is through Xiaomi’s website, which is useful if you remember the email or phone number associated with the account, which takes 5-10 minutes but requires access to mail or SMS.

Step-by-step:

• 🌐 Go to the recovery page: account.xiaomi.com/pass/forgetPassword.
• 📧 Enter the email or phone number associated with your account. Click "Next».
• 🔐 Select the recovery method: code to the mail or SMS. If the mail or number is not available, go to section 3.
• 🔄 Enter the code and set a new password. Confirm the changes.

After successful recovery, unlock your phone:

1. Turn on Redmi 6A and wait for the Mi Account password window to appear.
2. Enter a new password – the device unlocks automatically.

⚠️ Warning: If a site requires a backup email or phone number for two-factor authentication when it is restored and you don't remember them, this method won't work.

Access to mail/phone associated with Mi Account|Absence VPN (Xiaomi website may be blocked IP country)|Stable Internet connection (code valid for 5 minutes)-->

2 Unlocking through Mi Unlock Tool (official tool)

Mi Unlock Tool is a tool from Xiaomi for unlocking the bootloader and resetting the Mi Account, and it only works if two conditions are met:

• 🔗 Account was linked to the phone less than 72 hours ago (after this period, confirmation from the previous owner is required).
• 📱 It's on on the phone. OEM Unlock in the developer settings (if not, the method will not work).

Instructions:

1. Download Mi Unlock Tool from the official website: en.miui.com/unlock (Windows version).
2. Install Qualcomm drivers for Redmi 6A (if they are not available, the utility will not see the phone).
3. Turn off the phone and press Volume Down + Power to log into Fastboot Mode.
4. Connect Redmi 6A to your PC and launch the Mi Unlock Tool. Sign in with the same Mi Account that you're linked to.
5. Press Unlock and wait until the process is complete (usually 1-3 minutes).

⚠️ Attention: If Redmi 6A If you bought a used one, and the previous owner didn't untie the account, the Mi Unlock Tool will require confirmation from the user.

3. Xiaomi support link: when nothing helps

If you’ve exhausted all options, but your phone is still locked, contact Xiaomi’s official support.

• 📄 You have documents confirming the purchase (check, warranty card).
• 🔄 The phone is locked after the firmware update.
• 🤝 You bought a Redmi. 6A b/u and the previous owner is ready to confirm the transfer of rights.

How to apply:

1. Go to the support page: mi.com/global/support.
2. Select the "Mi Account" section» → «Unlock Device».
3. Fill out the form with the following: IMEI phone (you can find out via *#06# or on the box), Serial number (SN - on the box or under the battery), documents confirming possession (photo of the check, purchase agreement).

Wait for a response (usually 3-7 days), and if you decide yes, you will be given an unblocking instruction.

The time frame for the application varies by country, for example, in Russia and the CIS, the response is faster (2-3 days), and in Europe it can take up to 2 weeks.

💡

Before you call for support, take a picture of your phone box, check and IMEI (battery sticker) to speed up your application.

4. bypassing Mi Account through reset to factory settings (risky method)

This is a good way to go if you're prepared to lose all the data on your phone. It doesn't work on all versions of MIUI, but on Redmi 6A with firmware older than 2021, the idea is to reset your settings through Recovery Mode without having to lock your account.

Instructions:

1. Turn off Redmi 6A.
2. Press Volume Up + Power for 10-15 seconds until the Mi logo and Recovery menu appear.
3. Use volume buttons for navigation and power button for selection. Select Wipe Data → Wipe All Data.
4. Confirm the reset (usually you need to select "Yes").
5. After the reboot, the phone should start without asking for a password from the Mi Account.

⚠️ Attention: On new versions MIUI (12.5 and above) this method may not work – after reset, the phone will again require data input from the Mi Account, in which case only official access restoration remains (sections 1-3).

5. Alternative methods for experienced users (EDL, TestPoint)

If all the previous methods have failed, then there are advanced methods that require technical knowledge. EDL-Emergency Download Mode or TestPoint, which is physical access to the phone board, can cause a warranty loss or your phone to fail, so use them at your own risk.

Summary of methods:

• 🔧 EDL-Mode: Allows you to flash your phone through Qualcomm tools (such as the Mi Flash Tool) Requires an authorized Xiaomi account to unlock the bootloader.
• 🔬 TestPoint: Closing contacts on the motherboard for forced entry into the EDL. Need a soldering iron and schemes for Redmi 6A.

Step-by-step instructions for EDL-regime:

1. Download the Mi Flash Tool and the firmware for Redmi 6A (e.g., from here).
2. Install the Qualcomm HS-USB QDLoader 9008 drivers.
3. Turn off the phone and connect it to the PC, holding Volume up + Volume down (to log into EDL).
4. In the Mi Flash Tool, select the firmware and click "Flash". If an authorization error appears, you will need an official Xiaomi account with developer rights.

TestPoint requires:

• The Redmi 6A disassembly screwdriver.
• A soldering iron or tweezers to close contacts.
• TestPoint layout for this model (see forums like 4PDA or XDA Developers).

⚠️ Attention: Incorrect use of TestPoint can damage the motherboard. If you are not sure about your skills, contact the service center. EDL in workshops is usually 1-3 thousand rubles (for 2026).

💡

Bypassing Mi accounts via EDL or TestPoint is a last resort, and new firmware is used to block such methods, so the chances of success are ~30-50%.

6.How to avoid blocking Mi Account in the future

To avoid the problem of the Redmi 6A being blocked again, follow the following simple rules:

• 🔑 Save your account information: Write down your email, password, and backup number in a secure location (such as a password manager).
• 📱 Untie your account before selling: Before transferring your phone to another owner, make a reset via Settings → Additionally. → Reset settings and log out of Mi Account.
• 🔄 Update your firmware carefully: Do not install custom firmware without unlocking the bootloader - this can lead to locking.
• 🛡️ Set up two-factor authentication: Link backup email and phone number to your Xiaomi account.

If you are buying a Redmi 6A, be sure to check:

• 📋 Presence of a check or warranty card.
• 🔓 Account Status: Ask the seller to log out of the Mi Account and reset settings with you.
• 🔍 IMEI: Make sure your phone is not blacklisted (checking with *#06# and services like imei.info).

💡

Before buying a used Xiaomi, ask the seller to show the Settings → Mi Account menu. If someone else’s email is displayed there, the phone is tied to another account.

Frequently Asked Questions (FAQ)