Xiaomi’s Forced Shutdown: Step-by-step instructions for phones and TVs

Xiaomi devices – whether they are Redmi smartphones, POCO or Mi TVs TV — Sometimes they freeze so that standard shutdown methods don't work, the screen doesn't respond to touch, the buttons don't respond, and the system hangs on the logo, and in such cases, you need to force shutdown, but it's important to do it correctly so you don't damage the hardware or data.

This article covers all the current ways to emergency shutdown Xiaomi equipment – from the classic “hard reset” to hidden commands through the use of the device. ADB. We'll look at when it's safe to interrupt power, and when it can lead to data loss or even a device blink. TV Q2 Turns off differently than the Redmi Note 12.

If your device is just slowing down, try a soft reboot first (hold the power button for 10-15 seconds). If the screen is black and the lights are not on, or the system is getting stuck on the Fastboot, read on.

1. When should Xiaomi be forced to turn off?

Not every hang-up requires a hard reset, but here are the signs that the device really needs an emergency shutdown:

• 📱 The screen does not respond to touch, the power/volume buttons do not work for more than 30 seconds.
• 🔄 The device is stuck on the Mi or Fastboot logo (even after an hour of waiting).
• 🔋 Battery discharged to 0%, but the phone does not turn off (risk of overheating).
• 📺 Xiaomi TV is getting stuck on Android TV or shows a black screen with a backlight.
• 🚨 The device overheats (temperature above 50)°C according to sensor data).

On the other hand, you should not turn off forcibly if:

• 🔄 There is a firmware update (even if the process took more than an hour - the interruption will lead to a blink!).
• 📁 File movement occurs (for example, when copying data to a memory card).
• 🔧 Diagnostic mode works (for example, after falling or getting moisture).

⚠️ Note: If Xiaomi phone freezes during factory reset (Wipe Data in Recovery), forced shutdown may result in loss of IMEI or damage to the section /data. In this case, wait for the battery discharge or contact the service.

2. Ways to Forced Shutdown of Xiaomi Smartphones

For Redmi phones, POCO, Mi and Black Shark have several hard shutdown methods, and you can choose the right one depending on the model and the situation.

Classic Hard Reset (Power buttons) + volume)

The most versatile way, works on 90% of Xiaomi devices:

1. Hold the power button + volume button at the same time.
2. Hold for at least 10-15 seconds (even if the screen goes out earlier).
3. Release buttons when the device vibrates or the Mi logo appears.

For models with a remote battery (for example, Redmi) 3S/4A) You can just remove the battery from the 30 seconds.

2.2. Commands through ADB (for advanced users)

If the phone is responding to the connection to the PC, but the screen is not working, you can send a command to disconnect via ADB:

adb shell reboot -p

If the device is in Fastboot mode, use:

fastboot reboot

For this:

1. Connect your phone to your PC via USB.
2. Open the Command Prompt in the ADB folder.
3. Enter one of the commands above.

⚠️ Note: If the phone is in the process of encrypting data (for example, after resetting settings), the adb reboot command -p Check the encryption status in Recovery (Mount item) /data).

Specific combinations for different models

Some Xiaomi devices have unique ways to force shutdown:

💡

If the Xiaomi phone does not respond to buttons, but is connected to charging, try to turn off the cable and repeat the combination - sometimes the power supply "locks" the hardware shutdown.

3. Forced shutdown of Xiaomi TVs (Mi) TV)

Xiaomi TVs on Android TV Google TV The main problem is that there's no physical power button on most models:

Reset button (Reset)

On the back of most of the Mi TV (Like Mi. TV Q1E, Mi TV A2) there's a little hole with an inscription RESET:

1. Take a paper clip or a toothpick.
2. Press and hold the button for 10-15 seconds.
3. The TV should be turned off (the indicator will go out).

If the light flashes red, the TV is in emergency mode.

• 🔌 Turn off the power cord from the socket.
• 🕒 Wait 1 minute (discharge of capacitors).
• ⚡ Connect back and turn on the button on the remote.

Power outage through the socket

If the TV is completely frozen (black screen, no reaction to the remote), you can:

1. Pull the power cord out of the socket.
2. Wait 30 to 60 seconds (required!).
3. Connect back and turn on the button on the case (not remote!).

⚠️ Attention: Frequently shutting down Mi TV A power outlet without a time limit can damage the power supply.In Xiaomi 2020 TVs+ Soft Power Off system is used, and a sharp shutdown knocks down the energy saving settings.

3.3 Commands through ADB for Mi TV

If the TV is responding to the network but not the remote:

1. Connect to the same Wi-Fi network as the TV.
2. Use the command: adb connect [IP_television]:5555 adb shell input keyevent 26 (where 26 — power-button).

To find IP Check the list of devices on the router or use the Mi Home app (if the TV is linked to your account).

4. The risks of forced shutdown: what could go wrong?

A severe shutdown is always an emergency measure, not a standard procedure, and here are the potential consequences:

• 💾 File system damage: If a device writes data to a disk (e.g., updates an application or saves a photo), a forced shutdown may result in file loss or read errors.
• 🔧 Firmware failure: If the phone was updated "over the air» (OTA), interruption of the process can make the device unbootable ("brick»).
• 🔋 Battery problems: Abrupt power outages on fast-charging phones (e.g. Xiaomi) 12T Pro) can knock down the battery controller.
• 📱 Loss of loss IMEI: On some models (e.g. Redmi) 9A) Hard reset during operation with the modem leads to zeroing IMEI.
• 📺 Resetting Smart settings TV: On Mi TVs. TV Forced shutdown can reset the account binding or remove installed apps.

To minimize the risks:

• 🔄 Before turning off, try a soft reboot (holding the power button for 10 seconds).
• 📴 If your phone is responding to charging, connect it to the network and wait 5 minutes – sometimes the system recovers itself.
• 🔧 For TVs, use the Reset button, not disconnect from the socket.

💡

If the Xiaomi device is getting stuck during the upgrade, do not force it to turn it off. wait for the battery to drain completely or contact the service center for flashing through the service. EDL

5. What to do after forced shutdown?

The device turned off, but what's next?

1. Wait 1-2 minutes before turning on (especially for TVs).
2. Check the battery charge (if the level is below 5%, plug the charge before turning on).
3. Turn on the device with a standard power button.
4. Diagnose problems: 📱 On the phone: check the camera, speakers, sensors. 📺 On TV: Make sure all ports are in place HDMI No artifacts on the screen.

Reset the settings.

Recovery

Wipe Cache

If, after activation,

• 🔄 The phone fixates on the logo → Try to go to Fastboot (Power button) + Reduce volume and stream through the Mi Flash Tool.
• 📵 The TV does not connect to Wi-Fi → Reset your network settings in the Settings menu → Network & Internet.
• 🔋 The battery of the phone is running out too quickly. → Calibrate the battery (discharge to 0%, then charge to 100% without interruption).

💡

After the forced shutdown of the Xiaomi TV, check the sound settings – sometimes the Dolby Audio mode is reset or the volume is zeroed.

6. Alternative methods: when buttons don't work

If the physical buttons are broken or the device is not responding to anything, try these methods:

Battery discharge (for telephones)

If the phone is not turned off by any means:

1. Leave it without charging for 12-24 hours.
2. After full discharge, connect to the charger - sometimes this resets the "hung" state of the power controller.

⚠️ Do not use this method for phones with a fixed battery older than 3 years – a deep discharge can put the battery out of action.

Service codes (for telephones)

Some Xiaomi models support hidden commands for reboot:

• Dial ##7378423# (service menu).
• Select Reboot or Shutdown (if menus are available).

For POCO Black Shark can run the code #4636## → Battery Information → Force Stop.

Disconnection via Mi Account (for TVs)

If the Xiaomi TV is linked to the Mi Account:

1. Open the Mi Home app on your phone.
2. Select your TV from the list of devices.
3. Press. ⋮ → Remove the device (this will result in resetting the settings).

After that, the TV will restart and return to factory settings.

7. Frequent mistakes and how to avoid them

Many users compound the problems by turning off Xiaomi devices incorrectly.

Another common problem is that you get to freeze again after you're forced to shut down.

• 🔋 Failure of the battery (blown, wear and tear).
• 📁 Firmware damage (reflashing is needed).
• 🔧 Hardware problems (for example, the dump of memory chips).

💡

If your Xiaomi device freezes more than 1 time per month, it is not normal. Diagnostics via Mi Diagnostics (code ##6484##) or contact the service.

FAQ: Answers to Frequent Questions