How to Forcefully Reboot Xiaomi Redmi 6: All the Ways to Work

The Xiaomi Redmi 6, released in 2018, is still a popular budget smartphone thanks to its robust stuffing and MIUI support. However, even time-tested devices have crashes: the phone can freeze on the logo, stop responding to touch or go into a black screen, in which cases a forced reboot is the first step to restore performance.

This article will take a look at all the possible ways to reboot Redmi 6, including the soft and hard options, and explain when to use it. We've taken into account the features of the model, such as the lack of a removable battery and the specifics of working with the recovery mod on the MediaTek Helio P22 processor. If your phone does not turn on after the reboot, there is a section on diagnostic tips at the end of this article.

Why Xiaomi Redmi 6 may require a forced reboot

The causes of smartphone freezes are divided into software and hardware, the first are:

• 🔄 Application conflicts – especially after installing programs from unverified sources or updating MIUI.
• 📱 Memory overload – if less than 1 GB is free, the system begins to “brake».
• 🔋 Critical battery discharge (below 5%), after which the phone may not turn on even after charging.
• 🤖 Failures in operation MIUI — For example, after automatic update of the firmware.

Hardware problems are less common, but it is also important to exclude them:

• 🔌 Damage to the charging connector or cable, causing the phone to not receive enough power for stable operation.
• 🌡️ Overheating of the processor (for example, after long games or under direct sunlight).
• 💥 Fall or impact that damages the motherboard.

If the freeze occurred after a phone drop or moisture hit, a forced reboot can only aggravate the problem, in such cases, it is better to contact the service center immediately.

Method 1: Soft reboot (via power menu)

If the phone responds to touch but is unstable (e.g., apps close on their own or the interface “lays”), try a standard reboot via the menu:

1. Press and hold the power button (located on the right end of Redmi 6) for 2-3 seconds.
2. In the menu that appears, select Reboot (or Restart if the interface is in English).
3. Confirm the action by pressing OK.

This method is data-safe and does not reset settings, but it only works if:

• 📱 The screen responds to touch.
• 🔋 Battery level above 10%.
• 🤖 The system has not gone into “infinite boot” (bootloop).

💡

If the power button doesn’t respond, try connecting your phone to charge for 10 to 15 minutes, sometimes enough to wake up your device and perform a soft reboot.

Method 2: Hard reboot (power and volume buttons)

If the screen does not respond or the phone is getting stuck on the Xiaomi/Redmi logo, a forced reset will be required.

1. Press and hold the power and volume buttons at the same time (both are on the right end).
2. Keep them clamped for 10-15 seconds until the screen goes out and the phone vibrates.
3. Release the buttons. The device must automatically start rebooting.

This method simulates battery extraction (although it is not removable in Redmi 6) and resets the current state of the system.

• ⚠️ Continuous button retention for more than 20 seconds can cause emergency shutdown and file system damage.
• ⚠️ If the phone is discharged (the battery indicator flashes red), first connect it to charging for 5-10 minutes.

Method 3: Reboot with Recovery Mode (Recovery Mode)

If the phone turns on but reboots cyclically or gives a No command error, logging into the recaveri mode will help, a method that is also useful if you want to reset to the factory settings.

1. Turn off your phone (if it’s on, use method 2 for a hard reboot).
2. Press the power buttons and increase the volume simultaneously.
3. Once the Mi logo appears on the screen, release the power button, but keep the volume up until you see the Recovery menu.

In the reclaimer menu, use volume buttons for navigation and power buttons for confirmation.

For a simple reboot, select Reboot → Reboot to System. If the phone freezes again, try clearing the cache (Wipe Cache). Reset to factory settings (Wipe Data) only as a last resort, it will delete all data, including photos and contacts.

Be sure to make a backup copy of the data|Charge your phone to at least 30%|Prepare a username and password from your Mi Account (required after resetting)|Out. SIM-Card and memory card (if not required)

-->

Method 4: Reboot through ADB (for advanced users)

If you have access to the debugging USB (Option For developers was turned on before hanging, you can restart the phone through the computer using ADB (Android Debug Bridge is useful if the screen is unresponsive, but USB-connection is working.

Instructions:

1. Install Platform Tools on PC (includes adb.exe).
2. Connect Redmi 6 to your computer via USB-cable.
3. Open the command line (Windows) or terminal (macOS/Linux) in the adb folder.
4. Enter the command: adb devices If the phone is identified in the list, execute: adb reboot

If the adb reboot command doesn’t work, try:

• 🔌 Disconnect and reconnect the cable.
• 🔄 Reboot the PC.
• 📱 Hold the power button on your phone for 10 seconds (sometimes it wakes you up» USB-port).

ADB-Reboot is data-safe, but requires debugging presets. If the Developer Option wasn't enabled in advance, it won't work.

Method 5: Emergency reboot with a black screen or bootloop

If Redmi 6 doesn’t turn on at all (black screen, no vibration) or reboots cyclically on the Mi logo, the reasons may be more serious:

• 🔋 Deep battery discharge – the phone does not respond to charging.
• 📱 Firmware damage after failed update.
• 💥 Hardware failure (for example, memory chip dump).

Algorithm of action:

1. Connect the charger and leave it for 30 to 60 minutes. Sometimes after a deep discharge it takes time for the power controller to wake up.
2. Try charging from another device – perhaps the problem is in the cable or power supply.
3. Perform a hard reboot (method 2) holding the buttons for 20-30 seconds.
4. If the phone vibrates but doesn’t turn on, try logging into Fastboot Mode (clamp power + volume down) and flashing the device through the Mi Flash Tool.

💡

If after all the manipulations the phone does not turn on, but when you connect to the charger, an indicator (red / orange) appears, the problem is most likely in the firmware. If there is no indicator, a hardware malfunction (battery, motherboard).

What to do if Xiaomi Redmi 6 does not turn on after the reboot

If the phone does not show signs of life after a forced reboot, follow the following steps:

1. Check the charging: 🔌 Use the original cable and power supply (5V/2A). 🔋 Connect to another source (e.g. Power Bank). 📱 Try charging from the computer (USB 2.0).
2. Diagnose hardware problems: 🔍 Examine the charging connector for damage or oxidation. 🌡️ Check if the phone is overheating (if the case is hot, let it cool for 10-15 minutes).

Try flashing the phone.

• 📱 Enter the Fastboot Mode (Power) + volume).
• 💻 Connect to your PC and use the Mi Flash Tool to install the official firmware.

If none of the methods worked, contact the service center: the average cost of diagnostics Xiaomi Redmi 6 — 500-1000 rubles. Frequent reasons for “not turning on” after a reboot:

• 🔋 Bloating or battery failure (replacement required).
• 📱 Damage to the power connector or charging controller.
• 💥 Short circuit on the motherboard (for example, after moisture hits).

💡

Before visiting the service center, take a picture of the phone's IMEI (printed on the box or under the battery) to help avoid switching components.

FAQ: Frequent questions about the reboot of Xiaomi Redmi 6