How to get root rights to Xiaomi Redmi Note 7 without a computer: 3 working ways

Xiaomi Redmi Note 7 is still one of the most popular budget smartphones, but its potential is only revealed with root rights. Without them, you can not remove embedded MIUI applications, change system files or install custom firmware. Many users think that to get root rights you need a computer — that’s not true. In 2026, there are at least three working ways to do it directly from the phone, and we will go through each in detail.

It’s important to understand that the procedure is not official, and Xiaomi does not provide support for rooted devices, which means that you lose the warranty (if it is still valid) and take all the risks. However, with the right approach, the chance to “brick” the phone is minimal. In this article, only current methods tested on the Redmi Note 7 with MIUI 12, 13 and 14 (including global and Chinese versions).

If you are a beginner, don’t skip the section on preparation, which is responsible for 80% of success, and you can immediately jump to the first method (via Magisk).

Preparing the phone: 5 mandatory steps before the root

Even the most reliable method will fail if you don't make the presets. There are a few pitfalls on the Redmi Note 7 that many people forget about:

• 🔋 The battery charge is at least 70%, and it can take up to 30 minutes, and if the phone turns off in the middle, you'll have to start over (at best).
• 📱 Unlocked bootloader. You can't do it without it. If you haven't done it before, go back to the article about unlocking the bootloader for the Redmi Note 7.
• 🔄 Backup. Root can erase data in a section /data. Use Mi Cloud or Google Drive for backup of contacts, photos and apps.
• 📶 Stable Internet. Downloading files over the mobile network can be cliff-prone. Connect to Wi-Fi with a good signal.
• 🛠️ Disable antivirus software. Software like Avast or 360 Security can block Magisk installation as "suspicious software".

Pay special attention to the firmware version. On the Redmi Note 7 with MIUI 14 (Android 12), some methods may not work due to changes in the kernel. Check your version in Settings → About Phone → MIUI Version. If you have Android 9 (Pie) or lower, the process will be easier.

⚠️ Attention: Once you get your root rights, Mi Pay, Google Pay and banking apps may stop working. This is due to the SafetyNet trigger.

Method 1: Root through Magisk (most reliable in 2026)

Magisk is not just a root tool, it's an ecosystem that allows you to hide root status from apps. On the Redmi Note 7, this method works most stable, but requires you to follow the instructions exactly.

First, download the latest version of Magisk (at least 26.4) from the official GitHub repository. Do not use third-party sources - they often slip modified versions with viruses. The file should be called Magisk-v26.4.apk (the numbers may vary).

1. Install Magisk.apk as a regular application. If the system blocks the installation, allow installation from unknown sources in Settings → Applications → Special Access Rights.
2. Run Magisk and wait for SafetyNet to be checked. At this point, the status will be FAIL -- that's fine.
3. Click Install → Direct Installation (recommended). If this option is inactive, select Select and fix the file and specify the path to the firmware.
4. Once complete, the phone will restart. The first launch can take up to 10 minutes -- don't panic.

If Magisk does not appear in the app menu after the reboot, check the folder. /sdcard/Download — Sometimes the EP is kept there under the name magisk_manager.apk. Re-install it.

Method 2: Root through KingRoot (for lazy but risky)

KingRoot is a one-button root-rights solution that doesn't require unlocking the bootloader. Sounds good, but there are three major downsides:

• 🐢 KingRoot installs its superuser, which conflicts with Magisk.
• 🛡️ SafetyNet issues: Banking apps will refuse to work even after cloaking.
• 🔄 Frequent updates.The app can remove the root without warning after the update.

If you still want to try it,

1. Download the latest version of KingRoot from the official website (not from Play Market!).
2. Install the apc by allowing installation from unknown sources.
3. Launch the app and press TRY TO ROOT. It takes 3-7 minutes.
4. After a successful root, install Magisk over KingRoot to replace kinguser with magiskSU.

⚠️ Attention: On the Redmi Note 7 with MIUI 13+ KingRoot often gives a false success message when the root is not actually received.

Method 3: Root through boot.img patch (for experienced)

This is a good way to do it if the first two didn't work or you need a clean root without any unnecessary apps. You'll need to manually patch boot.img from your firmware.

First, you need to remove boot.img from the current firmware, and you can do this in two ways:

• 📲 Through TWRP (If installed: connect the phone to the PC (yes, the computer is only needed to copy the file) and copy /dev/block/bootdevice/by-name/boot.
• 📦 From the official firmware: download the firmware for your model from en.miui.com, rename the file to.zip and extract it. boot.img.

Next:

1. Move boot.img to your phone in the Download folder.
2. Install Magisk (if not already installed) and click Install → Select and fix the file.
3. Choose yours. boot.img Wait until you create a patched file (magisk_patched.img).
4. Reboot to TWRP and paste the patched file to the boot section.

It's more complicated, but it's the cleanest root, without any services, and it's suitable for custom cores or modified firmware.

How to check if the root has worked

It's not enough to see the Magisk icon on the menu, you need to make sure that the root works at the system level.

1. Install Root Checker from Play Market.The app should show the status of Root Access: Yes.
2. Open the terminal (e.g., Termux) and type the command: su If a superuser rights request appears, the root works.
3. Try uninstalling the system app via Titanium Backup or System App Remover.

If there is a root, but SafetyNet falls, you need to turn on the masking in Magisk:

1. Open Magisk → Settings → turn on MagiskHide.
2. Go to Magisk Masking and mark the apps that need to hide the root (like Google Play Services).
3. Restart your phone and check SafetyNet again.

💡

If your phone is slowing down after the root, try turning off Zygisk in the Magisk settings, which sometimes conflicts with MIUI.

What to do if something goes wrong

Even with the exact instructions, there can be problems. Here are the most common errors on the Redmi Note 7 and their solutions:

• 🔄 The phone is stuck on the logo MI: So, patch. boot.img I've been wrong. I've got to go through the original. boot.img through TWRP.
• 🚫 Magisk does not open after installation: remove it and install the version 25.2 (It's more stable on MIUI 12-13).
• 🔌 No charging after the root: it's a bug MIUI. Turn off Optimized Battery Charging in the battery settings.
• 📱 Apps fly out with an error: clear the cache in Settings → Annexes → Application management.

If the phone is no longer on (hard brick), do not panic. Redmi Note 7 can be restored through EDL-mode (emergency firmware).

⚠️ Warning: If the phone overheats or discharges quickly after a failed root, return the stock firmware immediately. /system, Which can cause the power controller to fail.

💡

On the Redmi Note 7 with a Snapdragon 660 processor, Magisk runs more stable than on devices with MediaTek.

FAQ: Answers to Frequent Questions