Modern smartphones like the Xiaomi Redmi Note 11 Pro have a powerful hardware, but MIUI software constraints often prevent them from unlocking their true potential. Users are eager to gain full control of the system to remove system debris, install specialized modules and fine-tune power consumption. The process of obtaining superuser rights, or root access, has become more complex with the introduction of new Android security mechanisms, but it is still available to enthusiasts.
In this article, we will take a look at a secure algorithm that allows you to modify the firmware without the risk of turning the device into a brick. You go from unlocking the bootloader to implementing Magisk, which is the de facto standard for privilege management in modern Android systems.
Before you start taking action, you need to understand the consequences: the procedure of unlocking the bootloader Xiaomi officially erases all data from the internal drive of the device, so backing up photos, contacts and documents is a mandatory first step.
Preparation of the device and the necessary software
The success of the operation depends on 90% on the proper preparation of the workplace and the smartphone itself. You will need a Windows computer, as most of the Xiaomi utilities and firmware tools are optimized for this platform. Also make sure that the USB cable is serviceable and capable of transmitting data, not only charging the battery, since interrupting the connection during firmware is fatal.
On the PC side, you need to install current drivers ADB And Fastboot, which allows the computer to communicate with the phone in special boot modes, and without these components, the system will not see the device in the desired state. 7z or zip.
- 📱 Charge the Redmi Note smartphone 11 Pro at least 60-70%, Avoiding a sudden shutdown at a critical moment.
- 💻 Download and install the Platform Tools platform (ADB and Fastboot from the official Android developer website.
- 🔗 Use the original. USB-cable or quality analogue with data transmission support.
- 📂 Create a folder on a C drive with a short path, for example C:\mi_root, Where you will put all the files.
Pay special attention to your Mi Account. To unlock the bootloader, your account must be linked to the device. This is done through the developer menu, which is hidden by default. You need to click on the MIUI version seven times in the About Phone section, and then the "Developers" option will appear in the advanced settings.
⚠️ Note: It takes 168 hours (7 days) to link your Mi Account to the bootloader unlocking device. If you try to unlock your phone before that time, the Xiaomi server will issue an error and you will have to start the process again.
Unlocking the bootloader (Bootloader)
Bootloader is a program that runs to the operating system and checks the integrity of its components. On Xiaomi devices, it is blocked by default, which prohibits making changes to the system partition. Unlocking is the first and mandatory step without which installing a custom recovery or obtaining root rights is impossible.
The process begins with the inclusion of debugging USB regime OEM-You need to log in to Mi on the phone and in the Mi Unlock Status app, making sure that the anchor status is displayed correctly. The device is then switched to Fastboot mode by pressing the volume reduction key when the power is turned off.
Then the Mi Unlock Tool runs on the computer, you need to log in under the same account that is attached to the phone, the utility will check the status of the device through Xiaomi servers, and if 7 days have passed since the binding, the unlock button will become active.
☑️ Checking before unlocking
Once you press the Unlock button, you start a process that takes a few minutes, and the phone reboots and all the data is deleted, and it's a security mechanism that ensures that the new owner can't access the previous one's data, and when you're done, you'll see an open palm or "Unlocked" when you boot.
Installation of custom TWRP Recovery
The regular Recovery menu is limited in functionality and does not allow you to install modified files. To implement superuser rights, we will need TWRP (Team Win Recovery Project), an open-source third-party recovery that allows you to make full backups, format partitions and install zip archives.
Finding the correct version of TWRP for the Redmi Note 11 Pro (the device's code name is usually pisces or the like, check out the 4PDA or XDA forum) is critical. An inappropriate version can lead to a broken touchscreen in recover mode or loading problems. The recovery firmware file usually has the.img extension.
The installation process is done via Fastboot. Place an image file, for example. twrp.img, file ADB-Open the command line in this folder and type a command to flash the recovery section:
fastboot flash recovery twrp.imgHowever, on some versions of MIUI, direct.flash can be blocked or overwritten at the first boot. Therefore, a temporary download method is often used: fastboot boot twrp.img. Once downloaded to TWRP, you must immediately install a patch that will prevent the backup from replacing the backup with stock.
| Parameter | Description | Importance |
|---|---|---|
| Fastboot mode | Low-level mode for firmware | Critically. |
| Image file | Image of Recaveri (.img) | Tall. |
| Team Flash | Recording in permanent memory | Medium |
| boot | Single download without recording | Tall. |
⚠️ Attention: After installation TWRP Do not boot into a regular Android system until you install Magisk. Xiaomi's rod system will automatically replace it when you first boot. TWRP on the stock Recovery, and the procedure will have to be repeated.
💡
If the touchscreen doesn’t work after installing TWRP, try finding a version marked “FBE” (File Based Encryption) or a special build for your Android version.
Magisk installation and obtaining Root rights
Magisk is a modern system that provides a system-less Unlike the old methods (SuperSU), Magisk is not a modifies system partition directly, but is embedded in a boot image (SafetyNet/Play Integrity, which is important for banking applications and Google Pay.
To install, you'll need a firmware file (ROM) that matches exactly the version you're currently running on your phone. Download the official firmware for Redmi Note 11 Pro and extract the boot.img file from it. Move this file to your phone.
Install the Magisk app (apk file) on your smartphone. Open the app, click "Install" next to the Magisk version, and select "Select and Patch File" method. boot.img. The program will create a modified file, commonly referred to as a magisk_patched_[random].img.
Copy the patched file back to your computer in a folder with ADB. Transfer the phone to Fastboot mode and execute the firmware command for the modified boot image:
fastboot flash boot magisk_patched_[random].imgOnce you complete the command, type in fastboot reboot. If everything goes well, the phone will boot and the Magisk icon will appear in the list of applications. Once you enter the application, you will see the active version and the status of "Root: there".
What to do if the phone goes into a bootloop?
Magisk setup and bypass protections
Getting rights is only half the battle. Many apps, especially banking ones, detect root access and refuse to work. The store has built-in hiding mechanisms, but they need to be activated properly. First of all, turn on "Zygisk" in the Magisk settings and restart the device.
Next, you need to set up a Denilist, which is a list of all the apps that you want to think there's no root right, like banking apps, Google Pay, some anti-cheat games, but simply adding to the list is often not enough for new versions of Android.
- 🛡️ Activate Play Integrity Fix (formerly SafetyNet Fix) to bypass Google Integrity Checks.
- 📱 Enable “Isolated Storage” for Magisk in your Android settings if this option is available in your version.
- 🔍 Use the Shamiko module to more effectively hide root rights from advanced detectors.
It is also recommended to rename the Magisk package through the application settings before the first launch. Some applications search for a package called com.topjohnwu.magisk, and changing the name to a random one (for example, com.android.settings) helps to hide the presence of the manager.root rights.
Possible problems and solutions
The process of modifying the Xiaomi Redmi Note 11 Pro does not always go smoothly. Users can experience firmware errors, loss of broadband signal (IMEI) or problems with Widevine (DRM), which causes Netflix to stop showing content in HD.
One of the common problems is that Widevine certificates are reset from L1 to L3 after unlocking the bootloader, which unfortunately is irreversible on many new Xiaomi devices without returning the stock bootloader and closing it back, which newer models can no longer officially do.
If the phone starts to run out quickly after getting the root rights, check the modules installed. Magisk conflict modules are a common cause of unstable operation. Turn them off one by one through Safe Mode (press the volume button when booting when the MIUI logo is on) to identify the culprit.
⚠️ Warning: Never delete system applications through Magisk or root-access file managers unless you are 100% sure of their purpose.
💡
The stability of the smartphone after obtaining root rights directly depends on the number and quality of installed modules. Minimalism is the key to success.