How to get a root rights on Xiaomi Redmi 7A PC-free: 3 working ways in 2026

Getting root rights on Xiaomi Redmi 7A Without using a computer, a challenge that many owners of this budget smartphone are concerned about, and despite the manufacturer's limitations, there are legal ways to unlock the potential of the device directly from the phone screen. In this article, we will analyze current methods for 2026, their pros and cons, and also dwell in detail on the risks that are important to consider before starting the procedure.

Model Redmi 7A (The codename pine was released in 2019, but is still popular due to its reliability and low price. MIUI They do not allow to fully use the capabilities of Android: it is impossible to remove embedded applications, change system files or install modified firmware. Root rights solve these problems, but require caution – wrong actions can lead to a “brick” (complete inoperability) of the device.

Unlike methods using a PC (for example, via Fastboot or ADB), The computer-free methods are based on exploiting vulnerabilities in firmware or using specialized applications. We tested all of the options described below on the latest versions. MIUI 14 (Android 9 Pie) and ensure their performance by following the instructions.

Why you should (or should not) get a root on Redmi 7A

Before you go into practice, it is important to weigh the pros and cons. Root rights give freedom, but deprive some of the benefits of standard firmware.

The pros of root rights:

• 🚀 Remove embedded software: The ability to get rid of unnecessary system applications (Mi Browser, Mi Music, GetApps, etc.) that take up space and consume the battery.
• 🔧 Deep system configuration: Change the kernel parameters, overclock the processor, optimize power consumption through applications like Kernel Adiutor.
• 📱 Install custom firmware: Switch to LineageOS, Pixel Experience or other firmware with pure Android.
• 🔒 System-level ad blocking: Apps like AdAway can completely cut off ads in all apps.

Cons and risks:

• ⚠️ Loss of warranty: Xiaomi does not officially support root rights, and getting them will void the warranty (even if you roll back).
• 🛡️ Security issues: Root opens access to system files for all applications, which increases the risk of infection with viruses.
• 🔄 Impossibility of updates OTA: After obtaining root rights standard updates MIUI stop installing.
• 💥 Brick Risk: An error in modifying system files can make your phone inoperable.

⚠️ Attention: On Redmi 7A With a bootloader, some methods without a PC may not work. Before you start, check the bootloader status through the fastboot oem device-info command (requires a PC) or the Mi Unlock Status app.

Preparing the phone before obtaining root rights

To minimize the risks, you need to properly prepare the device, and this is a critical step, because skipping any point can cause failures.

Step 1. Create a backup of the data

Root rights can erase all data on your phone. Use built-in backup MIUI (Settings → Additionally. → Backup and reset) or third-party apps like Swift Backup (requires a root for a full backup).

Step 2. Check the version. MIUI Android

Open the Settings. → The phone:

• Version MIUI (for example, MIUI Global 14.0.2).
• Android version (should be 9 Pie)
• Assembly number (QKQ1.190828.002 orsimilar).

This data will be needed to select the right method.

Step 3. Turn on debugging. USB unlock OEM

Even if you are not using a PC, these settings should be active:

1. Go to Settings → About Phone and 7 times click on the MIUI version to activate the Developer Mode.
2. Back to Settings → Additionally. → For developers.
3. Enable USB Debugging and OEM Unlocking.

Step 4: Charge your phone at least 60%

The process of obtaining root licenses can take up to 30 minutes, and the battery will be discharged during the operation.

Method 1: Root through KingRoot (the simplest, but unstable)

KingRoot is one of the few tools that can get root rights to Redmi. 7A It doesn't work on all versions, though. MIUI and often gives a temporary root.

Step-by-step:

1. Download the latest version of KingRoot from kingroot.net (don’t use third-party sources!).
2. Before installation, allow installation from unknown sources: Settings → Applications → Special Rights → Installation of unknown applications.
3. Install KingRoot and run it. Press Try to Root (may take several attempts).
4. Wait for the phone to restart. Once turned on, check for root through the Root Checker app.

Challenges and solutions:

• ❌ KingRoot can't find root: Try restarting your phone and trying again. If it doesn't work, it doesn't work for your version MIUI.
• ⚠️ Root disappears after reboot: This is normal for KingRoot.To secure the root, install SuperSU from Play Market and update the binary file through it.
• 🔄 phone is stuck on startup logo: Hold the power button 10+ second-on-second forced reboot.

⚠️ Warning: KingRoot is known for installing its own system services that are difficult to remove. If you plan to further modify your phone (for example, installing a custom recavator), you should use other methods.

Method 2: Root through Magisk (most reliable, but complex)

Magisk is a modern root-rights tool that doesn't modify the systemless root. 7A it can be installed without a PC, but you will need to pre-unlock the bootloader and install a custom Recovery TWRP.

Important: This method requires an unlocked bootloader. If it is locked, you will still need a PC to unlock through the Mi Unlock Tool (the official tool from Xiaomi).

Instructions:

1. Download the latest version of Magisk Manager (APK) from the official GitHub repository.
2. Install Magisk Manager and open it. The app will prompt you to download the latest version of Magisk. ZIP — agree.
3. Download. TWRP Recovery for Redmi 7A (Search for pine version from twrp.me.
4. Rename the file TWRP into recovery.img Move it to the root of the phone’s internal memory.
5. Install Flashify (requires a root, but at this stage you can use a temporary root from KingRoot).
6. In Flashify, select Flash. → Recovery Image and point the way to recovery.img. Confirm installation.
7. Reboot the phone to TWRP (hold on to food + Volume up when switched on).
8. V TWRP Select Install, find the downloaded Magisk ZIP and confirm installation.
9. After completion, press Reboot System.

Root-right check:

After restarting, install the Root Checker and run the check. If it goes well, you will see the message Root access is properly installed on this device!

⚠️ Note: If after installing Magisk phone does not load (hangs on the logo) MI), So you chose an incompatible version. TWRP Or Magisk. In this case, you're going to have to go over the Fastboot using a PC.

Method 3: Root through the patch boot image (for power users)

This method is suitable if you already have an unlocked bootloader, but you don’t want to install it. TWRP. It consists in modifying the file. boot.img using Magisk and its subsequent firmware through standard recaveri.

Step-by-step:

1. Download the original firmware for your version MIUI From en.miui.com.Select the version of Fastboot.
2. Remove the file from the archive boot.img (You can use an archiver on your phone).
3. Copy. boot.img Open it with Magisk Manager (click Install) → Select and Patch a File).
4. After patching in the folder Download will appear file magisk_patched.img.
5. Rename him in boot.img and move it to the root of the memory.
6. Install the Fastboot Tools app (requires root) and select the Flash Boot Image option.
7. Show the way to the patch. boot.img and confirm the firmware.
8. Reboot the phone.

Advantages of the method:

• 🔧 No installation required TWRP.
• 🔄 It is easy to roll back changes (just stitch the original one). boot.img).
• 🛡️ Less risk of damage to system partitions.

Disadvantages:

• ⚠️ Requires exact matching of the version boot.img and current firmware.
• 🔍 It is more difficult for beginners (you need to work with images).

💡

If after the patching boot.img The phone is not loading, try to flash the original boot.img To do this, download the full Fastboot firmware, retrieve it from it. boot.img and repeat 6-8.

What to do after getting a root license

Now that you have a root, it is important to set up the system properly to avoid security and stability issues.

1. Update Magisk and modules

Open Magisk Manager and check for updates. Install modules:

• BusyBox is for many root applications.
• Riru – Core – for modules that require call interception.
• Universal SafetyNet Fix – to bypass security checks (e.g. Google Pay)

2. Set up backups

Install Swift Backup or Titanium Backup and create a full backup of all applications and data. Store a copy on the cloud or external drive.

3. Remove unnecessary system applications

Use System App Remover (power users only!). Do not delete:

• 🚫 com.android.phone (telephony).
• 🚫 com.android.settings (settings).
• 🚫 Any apps with miui in the name (risk of losing functionality) MIUI).

4. Optimize productivity

Subtle tuning applications:

• Kernel Adiutor – Control of the core and frequencies of the processor.
• Greenify is a hibernation of background applications.
• SD Maid – cleaning up garbage and duplicates.

💡

Once you have the root rights, the first thing you do is update Magisk and back up, and that will protect you from data loss when you crash.

How to remove root rights from Redmi 7A

If you decide to return the phone to its original state (for example, for sale or warranty repair), you must completely remove traces of root rights.

Method 1: Through Magisk

1. Open Magisk Manager.
2. Go to Settings. → Complete removal.
3. Confirm the action and wait for the reboot.

Method 2: Original firmware boot.img

1. Download the original Fastboot firmware for your model.
2. Extract. boot.img and run it through Fastboot Tools or TWRP.

Method 3: Complete reset via Mi Flash (requires PC)

If the first two didn't work, you'd have to use the Mi Flash Tool to completely flash the phone, and that would bring it back to factory status.

⚠️ Note: After removing root rights, some applications (such as banking) can continue to detect traces of it.

Frequent mistakes and their solutions

Even if you follow the instructions accurately, you can have problems, and let's look at the most common ones and how to fix them.

If after a failed firmware, the phone does not turn on and does not respond to buttons, do not panic: Redmi 7A has an emergency firmware mode (EDL). It will require a PC and a special cable to activate it, but in 90% of cases the device can be restored.

FAQ: Answers to popular questions