How to Get Root Rights on Xiaomi Redmi 5: A Complete File Guide 4PDA

Getting the root rights to Xiaomi Redmi 5 (codenamed rosy) is a task that requires accuracy and understanding of processes. Unlike today’s smartphones, where manufacturers actively block such capabilities, the Redmi 5 (released in 2017) is still amenable to modification, but with reservations. This article is based on verified materials from 4PDA, Developer forums and personal experience of users who have successfully completed the procedure.

It is important to understand: unlocking the loader, installing a custom Recovery (TWRP) And getting root is three separate steps, each of which carries risks. MIUI 12+ The newer standard Mi Unlock unlock method may not work due to changes in Xiaomi’s security policy, so we’ll look at alternatives, including bypassing restrictions through the use of the new system. EDL-mode and patch files.

If you are a beginner, don’t skip the sections on preparation and backup. Experienced users can jump straight to unlocking the bootloader or installing it. TWRP. All files mentioned in the article are available in the topic 4PDA (References are given in the relevant sections).

Preparation: What to do before the start

Before you start manipulating the system, make sure that all the preliminary steps are followed, which minimizes the risk of "bricking" the device and data loss.

List of mandatory actions:

• 📱 Check the device model: go to Settings → The phone. → Model. Must be Redmi 5 (rosy). 5A (riva or Redmi 5 Plus (vince) – other devices, for which the instruction is not suitable.
• 🔋 Battery charge: at least 70%. The process can take up to 2 hours, and discharging in the middle of the operation will lead to failure.
• 💾 Data backup: copy photos, contacts, and important files to your PC or cloud. Use Mi Mover or Titanium Backup (if root already exists).
• 🖥️ Windows PC: You will need to work with Mi Unlock Tool, ADB and Fastboot. macOS/Linux Possible problems with drivers.

Also prepare:

• 🔌 Original. USB-cable: cheap cables may not transmit data in Fastboot mode.
• 🔓 Mi Account: link it to the device in advance (in account settings.
• 📂 File folder: Create on disk C:\ folder Redmi5_Root And keep all the utilities there.

⚠️ Note: If your Redmi 5 has a firmware installed MIUI Global Stable version 12.5.1 and later, the standard method of unlocking through the Mi Unlock Tool may not work. EDL-regime.

Unlocking the bootloader: official and alternative methods

Xiaomi’s bootloader is locked by default, unlocking it is the first and most critical step. Xiaomi’s official tool, the Mi Unlock Tool, doesn’t always work, especially on newer versions. MIUI. Let's look at both options.

The official method (Mi Unlock Tool)

This method is suitable for firmware older MIUI 11:

1. Download Mi Unlock Tool (version no lower than 5.5.224.30).
2. Turn on the phone Developer Mode: go to Settings → About Phone and 7 times click on the MIUI version.
3. Back to Settings → Additionally. → For developers and activate: 🔓 Unlocking OEM (It may not be available on newer slates). 🔌 Debugging by USB.

Connect the phone to the PC, confirm the debugging permission.

Mi Unlock Tool

Mi

Unlock

If the tool is running a "Couldn't unlock" or "Waiting for device" error:

• 🔄 Restart your phone and PC.
• 🔌 Try another one. USB-port (preferably) USB 2.0).
• 📥 Install Qualcomm drivers HS-USB QDLoader 9008 (required for the first time) EDL-regime).

Alternative method: Unlocking through EDL

If the official method does not work, you will have to use it. EDL-Emergency Download Mode is a low-level firmware mode that bypasses restrictions. MIUI. Risk high: if the device is mistaken, it can turn into a brick".

Procedure:

1. Download the archive with 4PDA (Look for a post with a title "EDL Unlock for Redmi 5 "Rosy." It should be in it: 📁 File. prog_emmc_firehose_8917.mbn (for your Snapdragon chipset model 450). 📁 MiFlash or QFil utility. 📁 Patched boot.img (if required).

Qualcomm

Volume up + Volume down

QHSUSB_BULK

Qualcomm HS-USB QDLoader 9008

QFil

.mbn

Download

After successful firmware, the phone will restart. The bootloader will be unlocked.

⚠️ Attention: Use EDL-The regime may result in loss of IMEI or network problems. IMEI *#06# If he's thrown, he'll need to be rebuilt through QCN-file (instructions are available on the 4PDA).

Installation of TWRP Recovery: version selection and firmware

After unlocking the bootloader, the next step is to install a custom Recovery TWRP (Team Win Recovery Project, which allows you to flash modified system images and get root rights. Redmi 5 (rosy) is a two-way version:

• 📱 Official. TWRP (from the development team - stable, but may not support new versions MIUI.
• 🛠️ Informal assemblies (c) 4PDA) — They are frequently updated, but may contain bugs.

We recommend using the unofficial version from the user. @andyyan (post 4PDA name "TWRP 3.6.2 for Redmi 5 rosy. It supports encryption. FBE (File-Based Encryption and works with the right MIUI 12/13.

Installation instructions:

1. Download the file. twrp-3.6.2_rosy.img (or newer) and save it to the folder Redmi5_Root.
2. Reboot your phone in Fastboot mode: Turn off the device, then press Volume down + Nutrition.
3. Connect your phone to your PC and check the connection with the command: fastboot devices must display the serial number of the device.
4. Please. TWRP: fastboot flash recovery twrp-3.6.2_rosy.img
5. Immediately after the firmware go to the Recovery: fastboot boot twrp-3.6.2_rosy.img This is important to prevent replacement. TWRP on the stock Recovery at the first load.

If, after the reboot, TWRP Replaced with a stock recap, do it:

• 🔄 Please. disable_forceencrypt_rosy.zip (available in the same subject on 4PDA) through TWRP. This will disable forced encryption that interferes with the preservation of custom recavery.
• 🔧 Install Magisk (about it below) - it will also help to "fix" TWRP.

💡

After installation TWRP Sensor is not working, connect OTG-This is a temporary solution, and in the next section we're going to fix this problem with Magisk.

Install Magisk: Getting root rights without risks

Magisk is a universal root-rights tool that does not change the systemless root, which allows you to pass SafetyNet and use banking applications. v25.2 newer.

Step-by-step:

1. Download the latest version of Magisk from GitHub (file) Magisk-v25.2.zip).
2. Copy the archive to your phone (for example, internal memory).
3. Reboot to TWRP (click Volume Up + Power when turned on).
4. V TWRP Choose Install → point the way Magisk-v25.2.zip → Swipe through the swipe to confirm.
5. After installation, reboot to the system.

Root rights check:

• 🔍 Install Magisk Manager app (download) APK same GitHub).
• 📱 Open the app and check the Installed status at the top of the screen.
• 🛠️ Launch the terminal (e.g. Termux) and type the command: su If a permission request appears, root is installed successfully.

If the Magisk Manager fails to open or if it is not open:

• 🔄 Reinstall. APK, pre-clearing the application data.
• 📥 Download the alternative Magisk Delta (fork with advanced features) with 4PDA.
• 🔧 In Magisk settings, turn off Enforce DenyList and restart your phone.

⚠️ Attention: MIUI 13 Magisk may conflict with the module miui_process, If the phone starts to brake, turn off this module through Magisk Settings. → Configure DenyList.

Problem Solving: Frequent Errors and Corrections

Even if you follow the instructions accurately, you can get errors, and let's look at the most common ones and how to fix them.

1. The phone is not determined in Fastboot/EDL

Causes and solutions:

• 🔌 Driver problem: Install Mi Flash Tool – it will automatically install the desired drivers.
• 🔋 Faulty cable/port: Try another USB-port (preferably on the back of the PC) or original cable.
• 🖥️ Antivirus conflict: temporarily disable Windows Defender or add a folder with utilities in exceptions.

2. After the firmware TWRP The phone is loaded into the bootloop

If the device is constantly restarted:

• 🔄 Boot in. TWRP (Hold the volume up + Power at vibration).
• 📁 Delete the file. /data/system/gesture.key (if there is).
• 🔧 Please. disable_forceencrypt.zip (available 4PDA).
• 🔋 Perform a reset via Wipe → Format Data (Warning: Deletes all data!).

3. Magisk is not installed ("Invalid") ZIP file")

The error arises from:

• 📁 Damaged archive: download Magisk again, check check the checksum (SHA-1).
• 🔧 Incompatible version TWRP: Update the Recovery to 3.6.2+.
• 📱 Breakdowns of the system partition: perform Fastboot firmware stock MIUI, then repeat the process.

💡

If you don't turn on after all the manipulations, don't panic. In 90% of cases, it can be restored through the firmware of the full Fastboot-ROM. Links to the official firmware for Redmi 5 are in the theme header on the site. 4PDA.

What to do after root: optimization and security

Root rights are a great opportunity, but they also require a responsible approach, and here's what you should do right after a successful installation:

1. Magisk setup for security

• 🔒 Hiding root from apps: In Magisk Settings, turn on MagiskHide (or DenyList in newer versions) and add banking apps to your app.
• 🔄 Disabling Automatic Updates: C Settings → The phone. → Update system disable auto-updates. They can overwrite modified files.
• 📡 Installation of modules: recommended modules for Redmi 5: 🔋 Battery Charge Limit – battery life limit (extends battery life). 🎮 Game Turbo Mod – Improves performance in games. 📵 Disable Flag Secure – allows you to take screenshots in protected applications.

2. Optimization of productivity

With root rights, Redmi 5 can be significantly accelerated:

• 🧹 Cleaning up system debris: use it SD Maid (requires root) to delete cache and unnecessary files.
• ⚡ Change of scheduler CPU: Through Kernel Adiutor, install the interactive scheduler for better responsiveness.
• 🔇 Shutdown MIUI-Bloata: Titanium Backup or ADB Remove unnecessary system applications (e.g. com.miui.analytics).

Backup of the system

With root and TWRP You can create a full backup system:

1. Download to TWRP.
2. Choose Backup → Check the Boot, System, Data sections.
3. Swipe for confirmation. The backup will be saved to a memory card or internal memory.
4. Copy the folder. TWRP/BACKUPS PC-only.

For recovery:

1. In TWRP, select Restore.
2. Show me the way to the backup.
3. Select partitions to restore (usually Boot and System).

💡

To avoid problems with updates MIUI, Always back up the current system before you run a new update. Updates can overwrite modified files, including Magisk.

FAQ: Answers to Frequent Questions