How to Get Root Rights on Xiaomi Redmi 9: A Complete Guide with Proven Methods

Getting root rights to Xiaomi Redmi 9 opens up access to hidden Android features, but requires exact follow-up instructions. This model (codenamed lancelot) has features that unlock the bootloader and install custom recavator that are different from other Xiaomi devices. In 2026, the procedure became more complicated due to the tightening of security policy. MIUI, But it's still doable with the right approach.

It's important to understand that root rights are not just "administrative access," but full control of system files, allowing you to remove embedded applications, change the CPU frequency, install modified firmware, but also deprives you of warranties and increases the risk of system damage. Redmi 9s. MIUI 14+ it is necessary to unlock the bootloader through the official Xiaomi tool, bypassing which installation TWRP or Magisk is impossible.

In this guide, we’ll look at the current ways to get root for all versions of Redmi 9 (including global, Chinese and Indian versions), given the changes in Xiaomi’s policy after 2023.

Preparation of the device for unlocking

Before starting the procedure, several critical steps must be taken, and skipping any of these can lead to locking the bootloader or the device's "brick." On Redmi 9, it is especially important to check the version. MIUI and the status of the loader, as the models with firmware are newer MIUI 13.0.8 requires additional action.

First, make sure that on your device:

• 📱 Debugging is on. USB (Settings → The phone. → Version. MIUI (press 7 times) → Additionally. → For developers → Debugging by USB)
• 🔓 Unblocking permitted OEM (For developers → Unlocking OEM)
• 🔋 Battery charge of at least 60% (to avoid shutdown during the procedure)
• 📁 Created a backup of important data (root resets all settings)

💡

Redmi 9s. MIUI 14+ item “Unlocking” OEM" This may not be on the developer menu, but you need to link your Xiaomi account to your device and wait 7 days after you first log in to your Mi Account.

Pay special attention to firmware versions. Anti-rollback devices will not allow you to install the old version. MIUI After unlocking. Check the current version in Settings → The phone. → Version. MIUI. For Redmi 9, firmware based on Android 10 is considered safe (MIUI 12) and Android 11 (MIUI 13).

⚠️ Note: If your device was purchased after January 2023, it is likely to have the default lock firmware installed, in which case unlocking through the Mi Unlock Tool will take 168 hours (7 days) of waiting instead of the previous 72 hours.

2 Unlock the bootloader through the Mi Unlock Tool

The official Mi Unlock Tool is the only legal way to unlock the bootloader on Redmi 9. The latest version of the program (June 2026) requires the mandatory binding of Xiaomi account to the device and passing a check on the originality of the device.

Download the Mi Unlock Tool (version 6.5.424.24 or later) and follow the following steps:

1. Install Xiaomi drivers for your OS (Windows) 10/11)
2. Run MiFlashUnlock.exe on behalf of the administrator
3. Sign in with the same Xiaomi account as you do on your phone
4. Put your phone in Fastboot mode (turn off, then press the Power) + Vol Down)
5. Connect the device to the PC and wait for the driver definition
6. Press Unlock and confirm the action.

The unlocking process will take 3 to 7 days depending on the version. MIUI. The phone will display this device is unlocked, which is a confirmation of successful unlocking. If you see a Couldn't unlock error, check it:

• 🔗 Internet connection stability (the program checks the status of the account)
• 🕒 Has it been enough time since the account was linked?
• 📱 Is the account on the phone and Mi Unlock Tool matched?

3. Installation of custom TWRP Recovery

After unlocking the bootloader, the next step is installation. TWRP (Team Win Recovery Project.Redmi 9 has a special build adapted to the MediaTek Helio processor G80 screen resolution 720x1600. Using unofficial versions can lead to sensor problems in the Recovery.

Download the current version TWRP Lancelot (Redmi 9) from the official website:

https://twrp.me/xiaomi/xiaomiredmi9.html

Or use a mirror (if the main site is not available):

https://androidfilehost.com/?w=files&flid=322306

The installation is performed via fastboot:

1. Unpack the archives with TWRP fastboot
2. Transfer the phone to Fastboot mode
3. The command is fastboot flash recovery. twrp-3.7.0_9-0-lancelot.img fastboot boot twrp-3.7.0_9-0-lancelot.img
4. Do not disconnect the device until full loading TWRP

⚠️ Note: On some versions MIUI 14 post-installation TWRP The system automatically overwrites the recavers to stock at the first load, so that you don't do that, right after you enter the back. TWRP Go to Mount. → System and delete the file /system/recovery-from-boot.p.

File. TWRP lantern|Fastboot version no lower than 33.0.3|Battery charged at 70%+|Automatic update disabled MIUI-->

4. Getting root rights through Magisk

Magisk is a one-stop solution for root rights without violating Android security (SafetyNet). Redmi 9 is recommended to use Magisk 26.4 or later, as older builds may conflict with the security of Android. MIUI 14.

Installation process:

1. Download the last one. Magisk-v26.4.zip GitHub
2. Move the file to your phone or flash drive
3. Boot in. TWRP (Power + Vol Up)
4. Choose Install. → Choose. Magisk.zip → Swipe to confirm
5. After installation, execute the Reboot System

To verify the success of the installation:

• Install Magisk Manager from the same archive
• Run it and check the status at the top of the screen.
• Run the SafetyNet test through the app (should be BasicIntegrity: True)

If the phone is stuck on the Redmi logo after the reboot, it could mean a conflict with the modules. MIUI. In this case:

1. Download to TWRP
2. Delete the folder. /data/adb/modules
3. Reinstall Magisk

5. Typical errors and their solutions

The process of rooting on Redmi 9 is often accompanied by errors specific to this model.

A special problem with Redmi 9 is anti-rollback protection. If you try to install firmware older than the one that was originally installed, the device will lock with an Anti-rollback check fail error. In this case, only the official firmware through the Mi Flash Tool in clean all mode will help.

💡

Redmi 9s. MIUI 14+ after receiving root, be sure to turn off automatic system updates in the settings (OTA) root-rights will result in loss of operation of the device.

6. Alternative methods of obtaining root

If the standard method is TWRP And Magisk is not a good fit, there are alternatives, which are less reliable, but can help in difficult situations:

Method 1: Patching boot.img via Magisk

This method does not require installation TWRP, but needs an unlocked bootloader:

1. Download stock firmware for your model from the official website
2. Extract. boot.img firmware-archive
3. Transfer it to your phone and select it from Magisk (Install) → Select and Patch a File)
4. Received magisk_patched.img Fastboot: Fastboot Flash boot magisk_patched.img

Method 2: Use of custom firmware

Firmware like LineageOS or Pixel Experience already includes root access. 9 Unofficial builds based on Android are available 12/13. Keep in mind that:

• 📲 You will lose functionality. MIUI (topics, dual annexes)
• 📷 Camera may be worse due to lack of Xiaomi drivers
• 🔋 Possible problems with energy consumption

Method 3: Temporary root through ADB

For one-time tasks (for example, removing system applications), you can use temporary root:

adb shell


su




mount -o rw,remount /system




rm /system/app/MiApplication/Application.apk

This access is valid until the first reboot.

7. What to do after obtaining root rights

Now that you have root access, it's important to set up the system properly to avoid performance and security issues.Here are key tips for Redmi 9:

Optimizing productivity:

• 🚀 Install Kernel Adiutor to set up the kernel (adjustment) CPU/GPU)
• 🧹 Use it. SD Maid for cleaning system debris
• 🔄 Disable unnecessary system services through Disable Service

Safety:

• 🔒 Install AFWall+ for managing application network access
• 🛡️ Set up MagiskHide to hide root from banking apps
• 🔄 Update Magisk and its modules regularly

Reinstatement of functionality MIUI:

• 📱 To return dual application functions, install the module MIUI Dual Apps Enabler
• 🎨 To bring back the themes MIUI, use the module MIUI Theme Manager Fix
• 📸 Try to improve the camera. ANX Camera or GCam with config for Helio G80

⚠️ Attention: On Redmi 9 Root rights are disabled support for Widevine L1, What reduces the quality of streaming in Netflix/Disney+ before 480p. To return L1, Install the Widevine module L1 Certifier and perform reset DRM through ##376##.

8 How to Get Everything Back (Rootback)

If you need to return the device to its original state (for example, for warranty repairs), follow the following steps:

Method 1: Mi Flash Tool (complete reset)

1. Download the fastboot stock firmware for your model
2. Unpack the archive and launch MiFlash.exe
3. Connect your phone in Fastboot mode
4. Select a folder with firmware and press Refresh → Flash
5. Select Clean All (Full Cleaning)

Method 2: Through TWRP (partial rollback)

1. Download the stock. boot.img for your version MIUI
2. Squeeze it through. TWRP or fastboot: fastboot flash boot stock_boot.img
3. Delete the folder. /data/adb through TWRP
4. Perform factory reset

Method 3: Through Magisk (soft rollback)

1. Open the Magisk Manager
2. Choose Uninstall → Complete Uninstall
3. Reset the device

After the root rollback, it is necessary to:

• 🔄 Perform a reset settings (Settings) → Additionally. → Recovery and discharge)
• 🔒 Turn off the debugging. USB unlock OEM
• 📱 Reconnect your Xiaomi account (if you plan to re-unblock)

💡

Even after a full root rollback, traces of modifications may remain in the section. /data. For warranty repair in Xiaomi, it is recommended to use the Mi Flash Tool with the clean all option, since it overwrites all partitions except user data.

FAQ: Frequent questions about root on Redmi 9